From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "nibble.max" <nibble.max@gmail.com>
Cc: linux-media <linux-media@vger.kernel.org>
Subject: Re: [PATCH 4/6] m88ds3103, dvbsky dvb-s2 cx23885 pcie card.
Date: Thu, 19 Apr 2012 15:11:54 -0300 [thread overview]
Message-ID: <4F90556A.2070508@redhat.com> (raw)
In-Reply-To: <201204152353392650604@gmail.com>
Em 15-04-2012 12:53, nibble.max escreveu:
> dvbsky dvb-s2 pcie based on montage m88ds3103 demodulator.
>
> Signed-off-by: Max nibble <nibble.max@gmail.com>
> ---
> drivers/media/video/cx23885/Kconfig | 1 +
> drivers/media/video/cx23885/cx23885-cards.c | 107 +++++++++++++++++++++++++++
> drivers/media/video/cx23885/cx23885-dvb.c | 52 +++++++++++++
> drivers/media/video/cx23885/cx23885-f300.c | 55 ++++++++++++++
> drivers/media/video/cx23885/cx23885-f300.h | 6 ++
> drivers/media/video/cx23885/cx23885-input.c | 15 ++++
> drivers/media/video/cx23885/cx23885.h | 3 +
> 7 files changed, 239 insertions(+)
>
> diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
> index b391e9b..20337c7 100644
> --- a/drivers/media/video/cx23885/Kconfig
> +++ b/drivers/media/video/cx23885/Kconfig
> @@ -20,6 +20,7 @@ config VIDEO_CX23885
> select DVB_LNBP21 if !DVB_FE_CUSTOMISE
> select DVB_STV6110 if !DVB_FE_CUSTOMISE
> select DVB_CX24116 if !DVB_FE_CUSTOMISE
> + select DVB_M88DS3103 if !DVB_FE_CUSTOMISE
> select DVB_STV0900 if !DVB_FE_CUSTOMISE
> select DVB_DS3000 if !DVB_FE_CUSTOMISE
> select DVB_STV0367 if !DVB_FE_CUSTOMISE
> diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
> index 19b5499..fdf9d0f 100644
> --- a/drivers/media/video/cx23885/cx23885-cards.c
> +++ b/drivers/media/video/cx23885/cx23885-cards.c
> @@ -497,6 +497,20 @@ struct cx23885_board cx23885_boards[] = {
> .name = "TerraTec Cinergy T PCIe Dual",
> .portb = CX23885_MPEG_DVB,
> .portc = CX23885_MPEG_DVB,
> + },
> +
> + [CX23885_BOARD_BST_PS8512] = {
> + .name = "Bestunar PS8512",
> + .portb = CX23885_MPEG_DVB,
> + },
> + [CX23885_BOARD_DVBSKY_S950] = {
> + .name = "DVBSKY S950",
> + .portb = CX23885_MPEG_DVB,
> + },
> + [CX23885_BOARD_DVBSKY_S952] = {
> + .name = "DVBSKY S952",
> + .portb = CX23885_MPEG_DVB,
> + .portc = CX23885_MPEG_DVB,
> }
> };
> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
> @@ -705,6 +719,18 @@ struct cx23885_subid cx23885_subids[] = {
> .subvendor = 0x153b,
> .subdevice = 0x117e,
> .card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
> + }, {
> + .subvendor = 0x14f1,
> + .subdevice = 0x8512,
> + .card = CX23885_BOARD_BST_PS8512,
> + }, {
> + .subvendor = 0x4254,
> + .subdevice = 0x0950,
> + .card = CX23885_BOARD_DVBSKY_S950,
> + }, {
> + .subvendor = 0x4254,
> + .subdevice = 0x0952,
> + .card = CX23885_BOARD_DVBSKY_S952,
> },
> };
> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
> @@ -1216,9 +1242,57 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
> /* enable irq */
> cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
> break;
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_BST_PS8512:
> + cx23885_gpio_enable(dev, GPIO_2, 1);
> + cx23885_gpio_clear(dev, GPIO_2);
> + msleep(100);
> + cx23885_gpio_set(dev, GPIO_2);
> + break;
> + case CX23885_BOARD_DVBSKY_S952:
> + cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
> +
> + cx23885_gpio_enable(dev, GPIO_2, 1);
> + cx23885_gpio_enable(dev, GPIO_11, 1);
> +
> + cx23885_gpio_clear(dev, GPIO_2);
> + cx23885_gpio_clear(dev, GPIO_11);
> + msleep(100);
> + cx23885_gpio_set(dev, GPIO_2);
> + cx23885_gpio_set(dev, GPIO_11);
> +
> + break;
> }
> }
>
> +static int cx23885_ir_patch(struct i2c_adapter *i2c, u8 reg, u8 mask)
> +{
> + struct i2c_msg msgs[2];
> + u8 tx_buf[2], rx_buf[1];
> + /* Write register address */
> + tx_buf[0] = reg;
> + msgs[0].addr = 0x4c;
> + msgs[0].flags = 0;
> + msgs[0].len = 1;
> + msgs[0].buf = (char *) tx_buf;
> + /* Read data from register */
> + msgs[1].addr = 0x4c;
> + msgs[1].flags = I2C_M_RD;
> + msgs[1].len = 1;
> + msgs[1].buf = (char *) rx_buf;
> +
> + i2c_transfer(i2c, msgs, 2);
> +
> + tx_buf[0] = reg;
> + tx_buf[1] = rx_buf[0] | mask;
> + msgs[0].addr = 0x4c;
> + msgs[0].flags = 0;
> + msgs[0].len = 2;
> + msgs[0].buf = (char *) tx_buf;
> +
> + return i2c_transfer(i2c, msgs, 1);
> +}
> +
> int cx23885_ir_init(struct cx23885_dev *dev)
> {
> static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
> @@ -1301,6 +1375,20 @@ int cx23885_ir_init(struct cx23885_dev *dev)
> v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
> ir_rx_pin_cfg_count, ir_rx_pin_cfg);
> break;
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
> + if (dev->sd_ir == NULL) {
> + ret = -ENODEV;
> + break;
> + }
> + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
> + ir_rx_pin_cfg_count, ir_rx_pin_cfg);
> +
> + cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x1f,0x80);
> + cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x23,0x80);
> + break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> if (!enable_885_ir)
> break;
> @@ -1332,6 +1420,9 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
> break;
> case CX23885_BOARD_TEVII_S470:
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
> /* sd_ir is a duplicate pointer to the AV Core, just clear it */
> dev->sd_ir = NULL;
> @@ -1375,6 +1466,9 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
> break;
> case CX23885_BOARD_TEVII_S470:
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> if (dev->sd_ir)
> cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
> break;
> @@ -1459,6 +1553,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> break;
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> case CX23885_BOARD_TEVII_S470:
> case CX23885_BOARD_DVBWORLD_2005:
> ts1->gen_ctrl_val = 0x5; /* Parallel */
> @@ -1489,6 +1585,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> break;
> + case CX23885_BOARD_DVBSKY_S952:
> + ts1->gen_ctrl_val = 0x5; /* Parallel */
> + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + ts2->gen_ctrl_val = 0xe; /* Serial bus + punctured clock */
> + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
> + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
> + break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
> @@ -1541,6 +1645,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_MPX885:
> case CX23885_BOARD_MYGICA_X8507:
> case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
> &dev->i2c_bus[2].i2c_adap,
> "cx25840", 0x88 >> 1, NULL);
> diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
> index 6835eb1..c5a3fa3 100644
> --- a/drivers/media/video/cx23885/cx23885-dvb.c
> +++ b/drivers/media/video/cx23885/cx23885-dvb.c
> @@ -51,6 +51,7 @@
> #include "stv6110.h"
> #include "lnbh24.h"
> #include "cx24116.h"
> +#include "m88ds3103.h"
> #include "cimax2.h"
> #include "lgs8gxx.h"
> #include "netup-eeprom.h"
> @@ -489,6 +490,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
> .if_khz = 5380,
> };
>
> +/* bestunar single dvb-s2 */
> +static struct m88ds3103_config bst_ds3103_config = {
> + .demod_address = 0x68,
> + .ci_mode = 0,
> + .pin_ctrl = 0x82,
> + .ts_mode = 0,
> + .set_voltage = bst_set_voltage,
> +};
> +/* DVBSKY dual dvb-s2 */
> +static struct m88ds3103_config dvbsky_ds3103_config_pri = {
> + .demod_address = 0x68,
> + .ci_mode = 0,
> + .pin_ctrl = 0x82,
> + .ts_mode = 0,
> + .set_voltage = bst_set_voltage,
> +};
> +static struct m88ds3103_config dvbsky_ds3103_config_sec = {
> + .demod_address = 0x68,
> + .ci_mode = 0,
> + .pin_ctrl = 0x82,
> + .ts_mode = 1,
> + .set_voltage = dvbsky_set_voltage_sec,
> +};
> +
> static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
> {
> struct dtv_frontend_properties *p = &fe->dtv_property_cache;
> @@ -1173,6 +1198,33 @@ static int dvb_register(struct cx23885_tsport *port)
> break;
> }
> break;
> +
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + i2c_bus = &dev->i2c_bus[1];
> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
> + &bst_ds3103_config,
> + &i2c_bus->i2c_adap);
> + break;
> +
> + case CX23885_BOARD_DVBSKY_S952:
> + switch (port->nr) {
> + /* port B */
> + case 1:
> + i2c_bus = &dev->i2c_bus[1];
> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
> + &dvbsky_ds3103_config_pri,
> + &i2c_bus->i2c_adap);
> + break;
> + /* port C */
> + case 2:
> + i2c_bus = &dev->i2c_bus[0];
> + fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
> + &dvbsky_ds3103_config_sec,
> + &i2c_bus->i2c_adap);
> + break;
> + }
> + break;
> default:
> printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
> " isn't supported yet\n",
> diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/video/cx23885/cx23885-f300.c
> index 93998f2..6be0369 100644
> --- a/drivers/media/video/cx23885/cx23885-f300.c
> +++ b/drivers/media/video/cx23885/cx23885-f300.c
> @@ -175,3 +175,58 @@ int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
>
> return f300_xfer(fe, buf);
> }
> +
> +/* bst control */
> +int bst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
> +{
> + struct cx23885_tsport *port = fe->dvb->priv;
> + struct cx23885_dev *dev = port->dev;
> +
> + cx23885_gpio_enable(dev, GPIO_1, 1);
> + cx23885_gpio_enable(dev, GPIO_0, 1);
> +
> + switch (voltage) {
> + case SEC_VOLTAGE_13:
> + cx23885_gpio_set(dev, GPIO_1);
> + cx23885_gpio_clear(dev, GPIO_0);
> + break;
> + case SEC_VOLTAGE_18:
> + cx23885_gpio_set(dev, GPIO_1);
> + cx23885_gpio_set(dev, GPIO_0);
> + break;
> + case SEC_VOLTAGE_OFF:
> + cx23885_gpio_clear(dev, GPIO_1);
> + cx23885_gpio_clear(dev, GPIO_0);
> + break;
> + }
> +
> +
> + return 0;
> +}
> +
> +int dvbsky_set_voltage_sec(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
> +{
> + struct cx23885_tsport *port = fe->dvb->priv;
> + struct cx23885_dev *dev = port->dev;
> +
> + cx23885_gpio_enable(dev, GPIO_12, 1);
> + cx23885_gpio_enable(dev, GPIO_13, 1);
> +
> + switch (voltage) {
> + case SEC_VOLTAGE_13:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_18:
> + cx23885_gpio_set(dev, GPIO_13);
> + cx23885_gpio_set(dev, GPIO_12);
> + break;
> + case SEC_VOLTAGE_OFF:
> + cx23885_gpio_clear(dev, GPIO_13);
> + cx23885_gpio_clear(dev, GPIO_12);
> + break;
> + }
> +
> +
> + return 0;
> +}
> \ No newline at end of file
Please add a new line.
> diff --git a/drivers/media/video/cx23885/cx23885-f300.h b/drivers/media/video/cx23885/cx23885-f300.h
> index e73344c..cd02d02 100644
> --- a/drivers/media/video/cx23885/cx23885-f300.h
> +++ b/drivers/media/video/cx23885/cx23885-f300.h
> @@ -1,2 +1,8 @@
> +extern int dvbsky_set_voltage_sec(struct dvb_frontend *fe,
> + fe_sec_voltage_t voltage);
> +
> +extern int bst_set_voltage(struct dvb_frontend *fe,
> + fe_sec_voltage_t voltage);
> +
> extern int f300_set_voltage(struct dvb_frontend *fe,
> fe_sec_voltage_t voltage);
> diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
> index ce765e3..69c01f3 100644
> --- a/drivers/media/video/cx23885/cx23885-input.c
> +++ b/drivers/media/video/cx23885/cx23885-input.c
> @@ -87,6 +87,9 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_TEVII_S470:
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The only boards we handle right now. However other boards
> * using the CX2388x integrated IR controller should be similar
> @@ -138,6 +141,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1850:
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> /*
> * The IR controller on this board only returns pulse widths.
> * Any other mode setting will fail to set up the device.
> @@ -279,6 +285,15 @@ int cx23885_input_init(struct cx23885_dev *dev)
> /* A guess at the remote */
> rc_map = RC_MAP_TEVII_NEC;
> break;
> + case CX23885_BOARD_BST_PS8512:
> + case CX23885_BOARD_DVBSKY_S950:
> + case CX23885_BOARD_DVBSKY_S952:
> + /* Integrated CX2388[58] IR controller */
> + driver_type = RC_DRIVER_IR_RAW;
> + allowed_protos = RC_TYPE_ALL;
> + /* A guess at the remote */
> + rc_map = RC_MAP_DVBSKY;
> + break;
> default:
> return -ENODEV;
> }
> diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
> index f020f05..2724148 100644
> --- a/drivers/media/video/cx23885/cx23885.h
> +++ b/drivers/media/video/cx23885/cx23885.h
> @@ -89,6 +89,9 @@
> #define CX23885_BOARD_MPX885 32
> #define CX23885_BOARD_MYGICA_X8507 33
> #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
> +#define CX23885_BOARD_BST_PS8512 35
> +#define CX23885_BOARD_DVBSKY_S952 36
> +#define CX23885_BOARD_DVBSKY_S950 37
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
next prev parent reply other threads:[~2012-04-19 18:11 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-22 10:38 [PATCH 1/3] m88brs2000 DVB-S frontend and tuner module Malcolm Priestley
2012-01-26 16:56 ` Mauro Carvalho Chehab
2012-01-27 22:26 ` Malcolm Priestley
2012-04-15 15:53 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-19 18:06 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-19 20:08 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-20 9:47 ` Antti Palosaari
2012-04-20 17:24 ` Mauro Carvalho Chehab
2012-04-21 2:45 ` nibble.max
2012-04-23 16:41 ` Antti Palosaari
2012-04-23 19:51 ` Konstantin Dimitrov
2012-04-23 21:04 ` Antti Palosaari
2012-04-27 18:44 ` Konstantin Dimitrov
2012-04-23 21:49 ` Mauro Carvalho Chehab
2012-04-27 19:01 ` Konstantin Dimitrov
2012-04-27 19:36 ` Mauro Carvalho Chehab
2012-04-27 20:37 ` Konstantin Dimitrov
2012-04-27 20:40 ` Konstantin Dimitrov
2012-04-27 20:54 ` Antti Palosaari
2012-04-27 21:01 ` Konstantin Dimitrov
2012-04-27 19:55 ` Antti Palosaari
2012-04-27 20:21 ` Konstantin Dimitrov
2012-04-27 20:42 ` Antti Palosaari
2012-04-27 21:13 ` Konstantin Dimitrov
2012-04-28 3:54 ` nibble.max
2012-04-28 9:17 ` Demod hardware pid filter implement nibble.max
2012-04-28 10:15 ` Antti Palosaari
2012-04-24 2:45 ` Re: [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-26 13:03 ` nibble.max
2012-04-26 13:24 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103 " nibble.max
2012-04-27 11:06 ` Mauro Carvalho Chehab
2012-04-27 14:17 ` Re: [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103demodulator driver nibble.max
2012-04-27 14:35 ` Mauro Carvalho Chehab
2012-04-27 18:03 ` Konstantin Dimitrov
2012-04-27 7:06 ` [PATCH 2/6 v2] dvbsky, dvb-s/s2 usb box nibble.max
2013-06-30 3:07 ` Fwd: " P. van Gaans
2014-01-15 19:30 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 3/6 v2] dvbsky, dvb-s/s2 PCIe card nibble.max
2012-04-27 7:07 ` [PATCH 4/6 v2] dvbsky, dvb-s/s2 PCI card nibble.max
2012-04-27 7:07 ` [PATCH 5/6 v2] dvbsky, remote control key map nibble.max
2012-04-27 7:07 ` [PATCH 6/6 v2] dvbsky, remote control include header file nibble.max
2012-04-20 17:10 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 2/6] m88ds3103, dvbsky dvb-s2 usb box nibble.max
2012-04-19 18:09 ` Mauro Carvalho Chehab
2012-04-20 8:08 ` nibble.max
2012-04-20 17:08 ` Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 3/6] m88ds3103, dvbsky dvb-s2 cx23883 pci card nibble.max
2012-04-15 15:53 ` [PATCH 4/6] m88ds3103, dvbsky dvb-s2 cx23885 pcie card nibble.max
2012-04-19 18:11 ` Mauro Carvalho Chehab [this message]
2012-04-15 15:53 ` [PATCH 5/6] m88ds3103, dvbsky remote control key map nibble.max
2012-04-19 18:16 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-15 15:53 ` [PATCH 6/6] m88ds3103, dvbsky remote control include header file nibble.max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F90556A.2070508@redhat.com \
--to=mchehab@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=nibble.max@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).