From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:40765 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755846Ab2EHSYm (ORCPT ); Tue, 8 May 2012 14:24:42 -0400 Message-ID: <4FA964E8.8080209@iki.fi> Date: Tue, 08 May 2012 21:24:40 +0300 From: Antti Palosaari MIME-Version: 1.0 To: CB CC: linux-media Subject: Re: em28xx : can work on ARM beagleboard ? References: <4FA96365.3090705@yahoo.fr> In-Reply-To: <4FA96365.3090705@yahoo.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 08.05.2012 21:18, CB wrote: > I would like to know if someone has already used the em28xx driver on a > beagleboard xM > (the connected device is a Dazzle DVC 100) > > I have tried with an Angstrom Narcissus image and a Debian but I still > get "select timeouts" and skipped frames with mencoded or the capture.c > sample It should work as I know one person ran PCTV NanoStick T2 290e using Pandaboard which is rather similar ARM hw. http://www.youtube.com/watch?v=Wuwyuw0y1Fo Did you tried it on x86 hardware? regards Antti -- http://palosaari.fi/