From: Antti Palosaari <crope@iki.fi>
To: Thomas Mair <thomas.mair86@googlemail.com>
Cc: pomidorabelisima@gmail.com,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: [PATCH v4 4/5] rtl28xxu: support G-Tek Electronics Group Lifeview LV5TDLX DVB-T
Date: Thu, 17 May 2012 17:47:02 +0300 [thread overview]
Message-ID: <4FB50F66.50301@iki.fi> (raw)
In-Reply-To: <1337206420-23810-5-git-send-email-thomas.mair86@googlemail.com>
On 17.05.2012 01:13, Thomas Mair wrote:
> Signed-off-by: Thomas Mair<thomas.mair86@googlemail.com>
Nacked.
Better PID definition is required.
> ---
> drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +
> drivers/media/dvb/dvb-usb/rtl28xxu.c | 11 ++++++++++-
> 2 files changed, 11 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
> index fd37be0..b0a86e9 100644
> --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
> +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
> @@ -135,6 +135,7 @@
> #define USB_PID_GENIUS_TVGO_DVB_T03 0x4012
> #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
> #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
> +#define USB_PID_GTEK 0xb803
You must give better name for the device. Vendor name is not enough as
many vendors has surely more than one device model.
Correct PID is something like USB_PID_GTEK_LIFEVIEW_LV5TDLX
> #define USB_PID_INTEL_CE9500 0x9500
> #define USB_PID_ITETECH_IT9135 0x9135
> #define USB_PID_ITETECH_IT9135_9005 0x9005
> diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c
> index 6817ef7..9056d28 100644
> --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c
> +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c
> @@ -1135,6 +1135,7 @@ enum rtl28xxu_usb_table_entry {
> RTL2831U_14AA_0160,
> RTL2831U_14AA_0161,
> RTL2832U_0CCD_00A9,
> + RTL2832U_1F4D_B803,
> };
>
> static struct usb_device_id rtl28xxu_table[] = {
> @@ -1149,6 +1150,8 @@ static struct usb_device_id rtl28xxu_table[] = {
> /* RTL2832U */
> [RTL2832U_0CCD_00A9] = {
> USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
> + [RTL2832U_1F4D_B803] = {
> + USB_DEVICE(USB_VID_GTEK, USB_PID_GTEK)},
> {} /* terminating entry */
> };
>
> @@ -1262,7 +1265,7 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = {
>
> .i2c_algo =&rtl28xxu_i2c_algo,
>
> - .num_device_descs = 1,
> + .num_device_descs = 2,
> .devices = {
> {
> .name = "Terratec Cinergy T Stick Black",
> @@ -1270,6 +1273,12 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = {
> &rtl28xxu_table[RTL2832U_0CCD_00A9],
> },
> },
> + {
> + .name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T [RTL2832U]",
> + .warm_ids = {
> + &rtl28xxu_table[RTL2832U_1F4D_B803],
> + },
> + },
> }
> },
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-05-17 14:47 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1>
2012-05-16 22:13 ` [PATCH v4 0/5] support for rtl2832 Thomas Mair
2012-05-16 22:13 ` [PATCH v4 1/5] rtl2832 ver. 0.4: removed signal statistics Thomas Mair
2012-05-17 3:36 ` poma
2012-05-17 3:40 ` poma
2012-05-17 8:04 ` Thomas Mair
2012-05-17 14:19 ` Antti Palosaari
2012-05-17 20:27 ` poma
2012-05-17 20:41 ` Antti Palosaari
2012-05-17 20:45 ` Thomas Mair
2012-05-17 20:49 ` Antti Palosaari
2012-05-17 21:03 ` poma
2012-05-17 21:08 ` poma
2012-05-17 21:19 ` Thomas Mair
2012-05-17 21:30 ` poma
2012-05-18 0:55 ` poma
[not found] ` <CAKZ=SG_mvvFae9ZE2H3ci_3HosLmQ1kihyGx6QCdyQGgQro52Q@mail.gmail.com>
2012-05-18 9:15 ` poma
2012-05-18 10:38 ` poma
2012-05-18 12:38 ` Antti Palosaari
2012-05-18 13:26 ` poma
2012-05-18 17:46 ` Thomas Mair
2012-05-18 17:51 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-17 14:41 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-17 14:43 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 4/5] rtl28xxu: support G-Tek Electronics Group Lifeview LV5TDLX DVB-T Thomas Mair
2012-05-17 14:47 ` Antti Palosaari [this message]
2012-05-17 20:43 ` poma
2012-05-16 22:13 ` [PATCH v4 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-17 14:50 ` Antti Palosaari
2012-05-17 14:53 ` [PATCH v4 0/5] support for rtl2832 Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 " Thomas Mair
2012-05-18 18:47 ` [PATCH v5 1/5] rtl2832 ver. 0.5: support for RTL2832 demod Thomas Mair
2012-05-18 20:21 ` Antti Palosaari
2012-07-05 14:32 ` Mauro Carvalho Chehab
2012-07-05 14:35 ` Antti Palosaari
2012-07-05 15:54 ` Mauro Carvalho Chehab
2012-07-07 15:45 ` poma
2012-07-05 14:41 ` Antti Palosaari
2012-07-05 15:53 ` Mauro Carvalho Chehab
2012-05-18 18:47 ` [PATCH v5 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-18 20:28 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-18 20:30 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 4/5] rtl28xxu: support Delock USB 2.0 DVB-T Thomas Mair
2012-05-18 20:31 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-18 20:32 ` Antti Palosaari
2012-05-18 20:47 ` [PATCH v5 0/5] support for rtl2832 Antti Palosaari
2012-05-18 23:35 ` poma
2012-05-20 9:56 ` Thomas Mair
2012-05-20 10:14 ` Antti Palosaari
2012-05-18 23:39 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB50F66.50301@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=pomidorabelisima@gmail.com \
--cc=thomas.mair86@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).