From: poma <pomidorabelisima@gmail.com>
To: Thomas Mair <thomas.mair86@googlemail.com>, linux-media@vger.kernel.org
Subject: Re: [PATCH v4 1/5] rtl2832 ver. 0.4: removed signal statistics
Date: Thu, 17 May 2012 23:30:42 +0200 [thread overview]
Message-ID: <4FB56E02.1090009@gmail.com> (raw)
In-Reply-To: <4FB56B63.7080703@googlemail.com>
On 05/17/2012 11:19 PM, Thomas Mair wrote:
> On 17.05.2012 23:08, poma wrote:
>> On 05/17/2012 10:45 PM, Thomas Mair wrote:
>>> On 17.05.2012 22:41, Antti Palosaari wrote:
>>>> On 17.05.2012 23:27, poma wrote:
>>>>> On 05/17/2012 04:19 PM, Antti Palosaari wrote:
>>>>>> Moikka Thomas,
>>>>>>
>>>>>> Here is the review. See comments below.
>>>>>>
>>>>>> And conclusion is that it is ready for the Kernel merge. I did not see
>>>>>> any big functiuonality problems - only some small issues that are likely
>>>>>> considered as a coding style etc. Feel free to fix those and sent new
>>>>>> patc serie or just new patch top of that.
>>>>>>
>>>>>> Reviewed-by: Antti Palosaari<crope@iki.fi>
>>>>
>>>> [...]
>>>>
>>>>> rtl2832.c.diff:
>>>>> - static int -> static const
>>>>> - struct -> static const struct
>>>>> - newline between function call and error check -> […]
>>>>> - 5 indications apropos 'spaces' regarding 'CodingStyle'- line 206
>>>>> (/usr/share/doc/kernel-doc-3.3.5/Documentation/CodingStyle)
>>>>> […]
>>>>> Use one space around (on each side of) most binary and ternary operators,
>>>>> such as any of these:
>>>>>
>>>>> = + -< > * / % |& ^<=>= == != ? :
>>>>>
>>>>> […]
>>>>>
>>>>> grep '>>\|<<' v4-1-5-rtl2832-ver.-0.4-removed-signal-statistics.patch.orig
>>>>> + len = (msb>> 3) + 1;
>>>>> + reading_tmp |= reading[i]<< ((len-1-i)*8);
>>>>> + *val = (reading_tmp>> lsb)& mask;
>>>>> + len = (msb>> 3) + 1;
>>>>> + reading_tmp |= reading[i]<< ((len-1-i)*8);
>>>>> + writing_tmp = reading_tmp& ~(mask<< lsb);
>>>>> + writing_tmp |= ((val& mask)<< lsb);
>>>>> + writing[i] = (writing_tmp>> ((len-1-i)*8))& 0xff;
>>>>> + num = bw_mode<< 20;
>>>>>
>>>>> Bitshift operators seems to be OK.
>>>>> Something else?
>>>>
>>>> (len-1-i)*8
>>> I almost have a new corrected version of the patch series ready, fixing this issues and the
>>> other ones you mentioned.
>>>>
>>>>> - 1 indication apropos 'media/dvb/frontends/rtl2832_priv.h:30'
>>>>> Compared to 'rtl2830_priv.h' seems to be OK.
>>>>>
>>>>> ./checkpatch.pl --no-tree
>>>>> v4-1-5-rtl2832-ver.-0.4-removed-signal-statistics.patch.orig
>>>>> ERROR: Missing Signed-off-by: line(s)
>>>>>
>>>>> total: 1 errors, 0 warnings, 1177 lines checked
>>>>>
>>>>> v4-1-5-rtl2832-ver.-0.4-removed-signal-statistics.patch.orig has style
>>>>> problems, please review. If any of these errors
>>>>> are false positives report them to the maintainer, see
>>>>> CHECKPATCH in MAINTAINERS.
>>>>>
>>>>> How do you produce this error:
>>>>> "ERROR: Macros with complex values should be enclosed in parenthesis…"?
>>>>
>>>> Just running checkpatch.pl --file foo
>>>>
>>>
>>> For me checkpath.pl also does not report the error you reported. It does seem
>>> strange to me, as the makros are the same as in rtl2830_priv.h
>>>
>>> Regards
>>> Thomas
>>
>> Yeah, 'rtl2830_priv.h' is the same.
>> Fu… me, now I don't know too!
>> :)
>>
>> cheers,
>> poma
>
> Ok. I will then check the patches with the new checkpatch version tomorrow as I need some
> rest now ;) It should not be too difficult to remove the errors.
>
> Regards
> Thomas
Have a pleasant beauty sleep ;)
cheers,
poma
ps.
/usr/src/kernels/`uname -r`/scripts
next prev parent reply other threads:[~2012-05-17 21:30 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1>
2012-05-16 22:13 ` [PATCH v4 0/5] support for rtl2832 Thomas Mair
2012-05-16 22:13 ` [PATCH v4 1/5] rtl2832 ver. 0.4: removed signal statistics Thomas Mair
2012-05-17 3:36 ` poma
2012-05-17 3:40 ` poma
2012-05-17 8:04 ` Thomas Mair
2012-05-17 14:19 ` Antti Palosaari
2012-05-17 20:27 ` poma
2012-05-17 20:41 ` Antti Palosaari
2012-05-17 20:45 ` Thomas Mair
2012-05-17 20:49 ` Antti Palosaari
2012-05-17 21:03 ` poma
2012-05-17 21:08 ` poma
2012-05-17 21:19 ` Thomas Mair
2012-05-17 21:30 ` poma [this message]
2012-05-18 0:55 ` poma
[not found] ` <CAKZ=SG_mvvFae9ZE2H3ci_3HosLmQ1kihyGx6QCdyQGgQro52Q@mail.gmail.com>
2012-05-18 9:15 ` poma
2012-05-18 10:38 ` poma
2012-05-18 12:38 ` Antti Palosaari
2012-05-18 13:26 ` poma
2012-05-18 17:46 ` Thomas Mair
2012-05-18 17:51 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-17 14:41 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-17 14:43 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 4/5] rtl28xxu: support G-Tek Electronics Group Lifeview LV5TDLX DVB-T Thomas Mair
2012-05-17 14:47 ` Antti Palosaari
2012-05-17 20:43 ` poma
2012-05-16 22:13 ` [PATCH v4 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-17 14:50 ` Antti Palosaari
2012-05-17 14:53 ` [PATCH v4 0/5] support for rtl2832 Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 " Thomas Mair
2012-05-18 18:47 ` [PATCH v5 1/5] rtl2832 ver. 0.5: support for RTL2832 demod Thomas Mair
2012-05-18 20:21 ` Antti Palosaari
2012-07-05 14:32 ` Mauro Carvalho Chehab
2012-07-05 14:35 ` Antti Palosaari
2012-07-05 15:54 ` Mauro Carvalho Chehab
2012-07-07 15:45 ` poma
2012-07-05 14:41 ` Antti Palosaari
2012-07-05 15:53 ` Mauro Carvalho Chehab
2012-05-18 18:47 ` [PATCH v5 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-18 20:28 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-18 20:30 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 4/5] rtl28xxu: support Delock USB 2.0 DVB-T Thomas Mair
2012-05-18 20:31 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-18 20:32 ` Antti Palosaari
2012-05-18 20:47 ` [PATCH v5 0/5] support for rtl2832 Antti Palosaari
2012-05-18 23:35 ` poma
2012-05-20 9:56 ` Thomas Mair
2012-05-20 10:14 ` Antti Palosaari
2012-05-18 23:39 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB56E02.1090009@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=thomas.mair86@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).