From: Antti Palosaari <crope@iki.fi>
To: Thomas Mair <thomas.mair86@googlemail.com>
Cc: linux-media@vger.kernel.org, pomidorabelisima@gmail.com
Subject: Re: [PATCH v5 0/5] support for rtl2832
Date: Fri, 18 May 2012 23:47:25 +0300 [thread overview]
Message-ID: <4FB6B55D.4060500@iki.fi> (raw)
In-Reply-To: <1337366864-1256-1-git-send-email-thomas.mair86@googlemail.com>
Good evening!
On 18.05.2012 21:47, Thomas Mair wrote:
> Good Evening!
>
> This is the corrected version of the patch series to support the
> RTL2832 demodulator. There where no major changes. The majority of
> the changes consist in fixing style issues and adhering to proper
> naming conventions.
Review done and seems to be OK for my eyes.
> The next question for me is how to proceed when including new
> devices. Poma already sent an extensive list a little while
> ago (http://patchwork.linuxtv.org/patch/10982/). Should they
> all be included at once, or should I wait until somone confirms
> they are working correctly and include them one by one?
It has been rule that device is added after known to work.
Unfortunately DVB USB do not support dynamic USB ID. In order to
workaround that I have done some small hackish solution for the
dvb_usb_rtl28xxu driver. Currently it works for RTL2831U based devices,
but I see it could be easily extended for RTL2832U too by adding module
parameter.
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-05-18 20:47 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1>
2012-05-16 22:13 ` [PATCH v4 0/5] support for rtl2832 Thomas Mair
2012-05-16 22:13 ` [PATCH v4 1/5] rtl2832 ver. 0.4: removed signal statistics Thomas Mair
2012-05-17 3:36 ` poma
2012-05-17 3:40 ` poma
2012-05-17 8:04 ` Thomas Mair
2012-05-17 14:19 ` Antti Palosaari
2012-05-17 20:27 ` poma
2012-05-17 20:41 ` Antti Palosaari
2012-05-17 20:45 ` Thomas Mair
2012-05-17 20:49 ` Antti Palosaari
2012-05-17 21:03 ` poma
2012-05-17 21:08 ` poma
2012-05-17 21:19 ` Thomas Mair
2012-05-17 21:30 ` poma
2012-05-18 0:55 ` poma
[not found] ` <CAKZ=SG_mvvFae9ZE2H3ci_3HosLmQ1kihyGx6QCdyQGgQro52Q@mail.gmail.com>
2012-05-18 9:15 ` poma
2012-05-18 10:38 ` poma
2012-05-18 12:38 ` Antti Palosaari
2012-05-18 13:26 ` poma
2012-05-18 17:46 ` Thomas Mair
2012-05-18 17:51 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-17 14:41 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-17 14:43 ` Antti Palosaari
2012-05-16 22:13 ` [PATCH v4 4/5] rtl28xxu: support G-Tek Electronics Group Lifeview LV5TDLX DVB-T Thomas Mair
2012-05-17 14:47 ` Antti Palosaari
2012-05-17 20:43 ` poma
2012-05-16 22:13 ` [PATCH v4 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-17 14:50 ` Antti Palosaari
2012-05-17 14:53 ` [PATCH v4 0/5] support for rtl2832 Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 " Thomas Mair
2012-05-18 18:47 ` [PATCH v5 1/5] rtl2832 ver. 0.5: support for RTL2832 demod Thomas Mair
2012-05-18 20:21 ` Antti Palosaari
2012-07-05 14:32 ` Mauro Carvalho Chehab
2012-07-05 14:35 ` Antti Palosaari
2012-07-05 15:54 ` Mauro Carvalho Chehab
2012-07-07 15:45 ` poma
2012-07-05 14:41 ` Antti Palosaari
2012-07-05 15:53 ` Mauro Carvalho Chehab
2012-05-18 18:47 ` [PATCH v5 2/5] rtl28xxu: support for the rtl2832 demod driver Thomas Mair
2012-05-18 20:28 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 3/5] rtl28xxu: renamed rtl2831_rd/rtl2831_wr to rtl28xx_rd/rtl28xx_wr Thomas Mair
2012-05-18 20:30 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 4/5] rtl28xxu: support Delock USB 2.0 DVB-T Thomas Mair
2012-05-18 20:31 ` Antti Palosaari
2012-05-18 18:47 ` [PATCH v5 5/5] rtl28xxu: support Terratec Noxon DAB/DAB+ stick Thomas Mair
2012-05-18 20:32 ` Antti Palosaari
2012-05-18 20:47 ` Antti Palosaari [this message]
2012-05-18 23:35 ` [PATCH v5 0/5] support for rtl2832 poma
2012-05-20 9:56 ` Thomas Mair
2012-05-20 10:14 ` Antti Palosaari
2012-05-18 23:39 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB6B55D.4060500@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=pomidorabelisima@gmail.com \
--cc=thomas.mair86@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).