* [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
@ 2012-06-28 21:29 Mack Stanley
2012-06-28 22:01 ` Devin Heitmueller
2012-06-29 4:18 ` Mauro Carvalho Chehab
0 siblings, 2 replies; 6+ messages in thread
From: Mack Stanley @ 2012-06-28 21:29 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: linux-media
Testing is needed on older (aka Pinnacle) PCTV 800i cards with S5H1409
demodulators
to check that current support for them isn't broken by this patch.
Signed-off-by: Mack Stanley <mcs1937@gmail.com>
---
drivers/media/video/cx88/cx88-dvb.c | 40
++++++++++++++++++++++++----------
1 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/media/video/cx88/cx88-dvb.c
b/drivers/media/video/cx88/cx88-dvb.c
index 003937c..6d49672 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -501,7 +501,7 @@ static const struct cx24123_config
kworld_dvbs_100_config = {
.lnb_polarity = 1,
};
-static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+static const struct s5h1409_config pinnacle_pctv_hd_800i_s5h1409_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_PARALLEL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
@@ -509,7 +509,7 @@ static const struct s5h1409_config
pinnacle_pctv_hd_800i_config = {
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
-};
+};
static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
.demod_address = 0x32 >> 1,
@@ -556,6 +556,16 @@ static const struct s5h1411_config
dvico_fusionhdtv7_config = {
.status_mode = S5H1411_DEMODLOCKING
};
+static const struct s5h1411_config pinnacle_pctv_hd_800i_s5h1411_config = {
+ .output_mode = S5H1411_PARALLEL_OUTPUT,
+ .gpio = S5H1411_GPIO_ON,
+ .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING
+};
+
static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
.i2c_address = 0xc2 >> 1,
.if_khz = 5380,
@@ -1297,16 +1307,22 @@ static int dvb_register(struct cx8802_dev *dev)
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
- fe0->dvb.frontend = dvb_attach(s5h1409_attach,
-
&pinnacle_pctv_hd_800i_config,
- &core->i2c_adap);
- if (fe0->dvb.frontend != NULL) {
- if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
- &core->i2c_adap,
-
&pinnacle_pctv_hd_800i_tuner_config))
- goto frontend_detach;
- }
- break;
+ /* Try s5h1409 chip first */
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+
&pinnacle_pctv_hd_800i_s5h1409_config,
+ &core->i2c_adap);
+ /* Otherwise, try s5h1411 */
+ if (fe0->dvb.frontend == NULL)
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+
&pinnacle_pctv_hd_800i_s5h1411_config,
+ &core->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &core->i2c_adap,
+
&pinnacle_pctv_hd_800i_tuner_config))
+ goto frontend_detach;
+ }
+ break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
--
1.7.7.6
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
2012-06-28 21:29 [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators Mack Stanley
@ 2012-06-28 22:01 ` Devin Heitmueller
2012-06-29 4:18 ` Mauro Carvalho Chehab
1 sibling, 0 replies; 6+ messages in thread
From: Devin Heitmueller @ 2012-06-28 22:01 UTC (permalink / raw)
To: Mack Stanley; +Cc: linux-media
On Thu, Jun 28, 2012 at 5:29 PM, Mack Stanley <mcs1937@gmail.com> wrote:
> Testing is needed on older (aka Pinnacle) PCTV 800i cards with S5H1409
> demodulators
> to check that current support for them isn't broken by this patch.
>
> Signed-off-by: Mack Stanley <mcs1937@gmail.com>
> ---
> drivers/media/video/cx88/cx88-dvb.c | 40
> ++++++++++++++++++++++++----------
> 1 files changed, 28 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/video/cx88/cx88-dvb.c
> b/drivers/media/video/cx88/cx88-dvb.c
> index 003937c..6d49672 100644
> --- a/drivers/media/video/cx88/cx88-dvb.c
> +++ b/drivers/media/video/cx88/cx88-dvb.c
> @@ -501,7 +501,7 @@ static const struct cx24123_config
> kworld_dvbs_100_config = {
> .lnb_polarity = 1,
> };
>
> -static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
> +static const struct s5h1409_config pinnacle_pctv_hd_800i_s5h1409_config = {
> .demod_address = 0x32 >> 1,
> .output_mode = S5H1409_PARALLEL_OUTPUT,
> .gpio = S5H1409_GPIO_ON,
> @@ -509,7 +509,7 @@ static const struct s5h1409_config
> pinnacle_pctv_hd_800i_config = {
> .inversion = S5H1409_INVERSION_OFF,
> .status_mode = S5H1409_DEMODLOCKING,
> .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> -};
> +};
>
> static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
> .demod_address = 0x32 >> 1,
> @@ -556,6 +556,16 @@ static const struct s5h1411_config
> dvico_fusionhdtv7_config = {
> .status_mode = S5H1411_DEMODLOCKING
> };
>
> +static const struct s5h1411_config pinnacle_pctv_hd_800i_s5h1411_config = {
> + .output_mode = S5H1411_PARALLEL_OUTPUT,
> + .gpio = S5H1411_GPIO_ON,
> + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> + .qam_if = S5H1411_IF_44000,
> + .vsb_if = S5H1411_IF_44000,
> + .inversion = S5H1411_INVERSION_OFF,
> + .status_mode = S5H1411_DEMODLOCKING
> +};
> +
> static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
> .i2c_address = 0xc2 >> 1,
> .if_khz = 5380,
> @@ -1297,16 +1307,22 @@ static int dvb_register(struct cx8802_dev *dev)
> }
> break;
> case CX88_BOARD_PINNACLE_PCTV_HD_800i:
> - fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> -
> &pinnacle_pctv_hd_800i_config,
> - &core->i2c_adap);
> - if (fe0->dvb.frontend != NULL) {
> - if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> - &core->i2c_adap,
> -
> &pinnacle_pctv_hd_800i_tuner_config))
> - goto frontend_detach;
> - }
> - break;
> + /* Try s5h1409 chip first */
> + fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1409_config,
> + &core->i2c_adap);
> + /* Otherwise, try s5h1411 */
> + if (fe0->dvb.frontend == NULL)
> + fe0->dvb.frontend = dvb_attach(s5h1411_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1411_config,
> + &core->i2c_adap);
> + if (fe0->dvb.frontend != NULL) {
> + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> + &core->i2c_adap,
> +
> &pinnacle_pctv_hd_800i_tuner_config))
> + goto frontend_detach;
> + }
> + break;
> case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
> fe0->dvb.frontend = dvb_attach(s5h1409_attach,
>
> &dvico_hdtv5_pci_nano_config,
> --
> 1.7.7.6
>
>
Looks good. Thanks for taking the time to put this together.
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
2012-06-28 21:29 [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators Mack Stanley
2012-06-28 22:01 ` Devin Heitmueller
@ 2012-06-29 4:18 ` Mauro Carvalho Chehab
2012-06-29 4:38 ` Mack Stanley
1 sibling, 1 reply; 6+ messages in thread
From: Mauro Carvalho Chehab @ 2012-06-29 4:18 UTC (permalink / raw)
To: Mack Stanley; +Cc: Devin Heitmueller, linux-media
Em 28-06-2012 18:29, Mack Stanley escreveu:
> Testing is needed on older (aka Pinnacle) PCTV 800i cards with S5H1409
> demodulators
> to check that current support for them isn't broken by this patch.
>
> Signed-off-by: Mack Stanley <mcs1937@gmail.com>
> ---
> drivers/media/video/cx88/cx88-dvb.c | 40
> ++++++++++++++++++++++++----------
> 1 files changed, 28 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/video/cx88/cx88-dvb.c
> b/drivers/media/video/cx88/cx88-dvb.c
> index 003937c..6d49672 100644
> --- a/drivers/media/video/cx88/cx88-dvb.c
> +++ b/drivers/media/video/cx88/cx88-dvb.c
> @@ -501,7 +501,7 @@ static const struct cx24123_config
> kworld_dvbs_100_config = {
> .lnb_polarity = 1,
> };
>
> -static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
> +static const struct s5h1409_config pinnacle_pctv_hd_800i_s5h1409_config = {
> .demod_address = 0x32 >> 1,
> .output_mode = S5H1409_PARALLEL_OUTPUT,
> .gpio = S5H1409_GPIO_ON,
> @@ -509,7 +509,7 @@ static const struct s5h1409_config
> pinnacle_pctv_hd_800i_config = {
> .inversion = S5H1409_INVERSION_OFF,
> .status_mode = S5H1409_DEMODLOCKING,
> .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> -};
> +};
>
> static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
> .demod_address = 0x32 >> 1,
> @@ -556,6 +556,16 @@ static const struct s5h1411_config
> dvico_fusionhdtv7_config = {
Patch got line-wrapped by your email. Please fix, otherwise, it can't be applied.
> .status_mode = S5H1411_DEMODLOCKING
> };
>
> +static const struct s5h1411_config pinnacle_pctv_hd_800i_s5h1411_config = {
> + .output_mode = S5H1411_PARALLEL_OUTPUT,
> + .gpio = S5H1411_GPIO_ON,
> + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> + .qam_if = S5H1411_IF_44000,
> + .vsb_if = S5H1411_IF_44000,
> + .inversion = S5H1411_INVERSION_OFF,
> + .status_mode = S5H1411_DEMODLOCKING
> +};
> +
> static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
> .i2c_address = 0xc2 >> 1,
> .if_khz = 5380,
> @@ -1297,16 +1307,22 @@ static int dvb_register(struct cx8802_dev *dev)
> }
> break;
> case CX88_BOARD_PINNACLE_PCTV_HD_800i:
> - fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> -
> &pinnacle_pctv_hd_800i_config,
> - &core->i2c_adap);
> - if (fe0->dvb.frontend != NULL) {
> - if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> - &core->i2c_adap,
> -
> &pinnacle_pctv_hd_800i_tuner_config))
> - goto frontend_detach;
> - }
> - break;
> + /* Try s5h1409 chip first */
> + fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1409_config,
> + &core->i2c_adap);
> + /* Otherwise, try s5h1411 */
> + if (fe0->dvb.frontend == NULL)
> + fe0->dvb.frontend = dvb_attach(s5h1411_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1411_config,
> + &core->i2c_adap);
> + if (fe0->dvb.frontend != NULL) {
> + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> + &core->i2c_adap,
> +
> &pinnacle_pctv_hd_800i_tuner_config))
> + goto frontend_detach;
> + }
> + break;
> case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
> fe0->dvb.frontend = dvb_attach(s5h1409_attach,
>
> &dvico_hdtv5_pci_nano_config,
> --
> 1.7.7.6
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
2012-06-29 4:18 ` Mauro Carvalho Chehab
@ 2012-06-29 4:38 ` Mack Stanley
2012-07-06 19:39 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 6+ messages in thread
From: Mack Stanley @ 2012-06-29 4:38 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: linux-media
I'm sorry to have missed the word-wrap. Here's a new copy. ---Mack
Testing needed on older (Pinnacle) PCTV 800i cards with S5H1409 demodulators
to check that current support for them isn't broken by this patch.
Signed-off-by: Mack Stanley <mcs1937@gmail.com>
---
drivers/media/video/cx88/cx88-dvb.c | 40
++++++++++++++++++++++++----------
1 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/media/video/cx88/cx88-dvb.c
b/drivers/media/video/cx88/cx88-dvb.c
index 003937c..6d49672 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -501,7 +501,7 @@ static const struct cx24123_config
kworld_dvbs_100_config = {
.lnb_polarity = 1,
};
-static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+static const struct s5h1409_config pinnacle_pctv_hd_800i_s5h1409_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_PARALLEL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
@@ -509,7 +509,7 @@ static const struct s5h1409_config
pinnacle_pctv_hd_800i_config = {
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
-};
+};
static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
.demod_address = 0x32 >> 1,
@@ -556,6 +556,16 @@ static const struct s5h1411_config
dvico_fusionhdtv7_config = {
.status_mode = S5H1411_DEMODLOCKING
};
+static const struct s5h1411_config pinnacle_pctv_hd_800i_s5h1411_config = {
+ .output_mode = S5H1411_PARALLEL_OUTPUT,
+ .gpio = S5H1411_GPIO_ON,
+ .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING
+};
+
static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
.i2c_address = 0xc2 >> 1,
.if_khz = 5380,
@@ -1297,16 +1307,22 @@ static int dvb_register(struct cx8802_dev *dev)
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
- fe0->dvb.frontend = dvb_attach(s5h1409_attach,
-
&pinnacle_pctv_hd_800i_config,
- &core->i2c_adap);
- if (fe0->dvb.frontend != NULL) {
- if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
- &core->i2c_adap,
-
&pinnacle_pctv_hd_800i_tuner_config))
- goto frontend_detach;
- }
- break;
+ /* Try s5h1409 chip first */
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+
&pinnacle_pctv_hd_800i_s5h1409_config,
+ &core->i2c_adap);
+ /* Otherwise, try s5h1411 */
+ if (fe0->dvb.frontend == NULL)
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+
&pinnacle_pctv_hd_800i_s5h1411_config,
+ &core->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &core->i2c_adap,
+
&pinnacle_pctv_hd_800i_tuner_config))
+ goto frontend_detach;
+ }
+ break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
--
1.7.7.6
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
2012-06-29 4:38 ` Mack Stanley
@ 2012-07-06 19:39 ` Mauro Carvalho Chehab
2012-07-06 20:04 ` Devin Heitmueller
0 siblings, 1 reply; 6+ messages in thread
From: Mauro Carvalho Chehab @ 2012-07-06 19:39 UTC (permalink / raw)
To: Mack Stanley; +Cc: linux-media
Em 29-06-2012 01:38, Mack Stanley escreveu:
> I'm sorry to have missed the word-wrap. Here's a new copy. ---Mack
>
> Testing needed on older (Pinnacle) PCTV 800i cards with S5H1409 demodulators
> to check that current support for them isn't broken by this patch.
>
> Signed-off-by: Mack Stanley <mcs1937@gmail.com>
> ---
> drivers/media/video/cx88/cx88-dvb.c | 40
> ++++++++++++++++++++++++----------
It is still completely mangled. It is impossible to apply it this way.
Regards,
Mauro
> 1 files changed, 28 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/video/cx88/cx88-dvb.c
> b/drivers/media/video/cx88/cx88-dvb.c
> index 003937c..6d49672 100644
> --- a/drivers/media/video/cx88/cx88-dvb.c
> +++ b/drivers/media/video/cx88/cx88-dvb.c
> @@ -501,7 +501,7 @@ static const struct cx24123_config
> kworld_dvbs_100_config = {
> .lnb_polarity = 1,
> };
>
> -static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
> +static const struct s5h1409_config pinnacle_pctv_hd_800i_s5h1409_config = {
> .demod_address = 0x32 >> 1,
> .output_mode = S5H1409_PARALLEL_OUTPUT,
> .gpio = S5H1409_GPIO_ON,
> @@ -509,7 +509,7 @@ static const struct s5h1409_config
> pinnacle_pctv_hd_800i_config = {
> .inversion = S5H1409_INVERSION_OFF,
> .status_mode = S5H1409_DEMODLOCKING,
> .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> -};
> +};
>
> static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
> .demod_address = 0x32 >> 1,
> @@ -556,6 +556,16 @@ static const struct s5h1411_config
> dvico_fusionhdtv7_config = {
> .status_mode = S5H1411_DEMODLOCKING
> };
>
> +static const struct s5h1411_config pinnacle_pctv_hd_800i_s5h1411_config = {
> + .output_mode = S5H1411_PARALLEL_OUTPUT,
> + .gpio = S5H1411_GPIO_ON,
> + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
> + .qam_if = S5H1411_IF_44000,
> + .vsb_if = S5H1411_IF_44000,
> + .inversion = S5H1411_INVERSION_OFF,
> + .status_mode = S5H1411_DEMODLOCKING
> +};
> +
> static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
> .i2c_address = 0xc2 >> 1,
> .if_khz = 5380,
> @@ -1297,16 +1307,22 @@ static int dvb_register(struct cx8802_dev *dev)
> }
> break;
> case CX88_BOARD_PINNACLE_PCTV_HD_800i:
> - fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> -
> &pinnacle_pctv_hd_800i_config,
> - &core->i2c_adap);
> - if (fe0->dvb.frontend != NULL) {
> - if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> - &core->i2c_adap,
> -
> &pinnacle_pctv_hd_800i_tuner_config))
> - goto frontend_detach;
> - }
> - break;
> + /* Try s5h1409 chip first */
> + fe0->dvb.frontend = dvb_attach(s5h1409_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1409_config,
> + &core->i2c_adap);
> + /* Otherwise, try s5h1411 */
> + if (fe0->dvb.frontend == NULL)
> + fe0->dvb.frontend = dvb_attach(s5h1411_attach,
> +
> &pinnacle_pctv_hd_800i_s5h1411_config,
> + &core->i2c_adap);
> + if (fe0->dvb.frontend != NULL) {
> + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
> + &core->i2c_adap,
> +
> &pinnacle_pctv_hd_800i_tuner_config))
> + goto frontend_detach;
> + }
> + break;
> case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
> fe0->dvb.frontend = dvb_attach(s5h1409_attach,
>
> &dvico_hdtv5_pci_nano_config,
> --
> 1.7.7.6
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators
2012-07-06 19:39 ` Mauro Carvalho Chehab
@ 2012-07-06 20:04 ` Devin Heitmueller
0 siblings, 0 replies; 6+ messages in thread
From: Devin Heitmueller @ 2012-07-06 20:04 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Mack Stanley, linux-media
On Fri, Jul 6, 2012 at 3:39 PM, Mauro Carvalho Chehab
<mchehab@redhat.com> wrote:
> Em 29-06-2012 01:38, Mack Stanley escreveu:
>> I'm sorry to have missed the word-wrap. Here's a new copy. ---Mack
>>
>> Testing needed on older (Pinnacle) PCTV 800i cards with S5H1409 demodulators
>> to check that current support for them isn't broken by this patch.
>>
>> Signed-off-by: Mack Stanley <mcs1937@gmail.com>
>> ---
>> drivers/media/video/cx88/cx88-dvb.c | 40
>> ++++++++++++++++++++++++----------
>
>
> It is still completely mangled. It is impossible to apply it this way.
>
> Regards,
> Mauro
Mack,
Assuming this is a git tree, just use "git format-patch" followed by
"git send-email".
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-07-06 20:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-06-28 21:29 [PATCH 1/1] Add support for newer PCTV 800i cards with s5h1411 demodulators Mack Stanley
2012-06-28 22:01 ` Devin Heitmueller
2012-06-29 4:18 ` Mauro Carvalho Chehab
2012-06-29 4:38 ` Mack Stanley
2012-07-06 19:39 ` Mauro Carvalho Chehab
2012-07-06 20:04 ` Devin Heitmueller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).