From: Antti Palosaari <crope@iki.fi>
To: "André Weidemann" <Andre.Weidemann@web.de>
Cc: Steve Hill <steve@nexusuk.org>, linux-media@vger.kernel.org
Subject: Re: pctv452e
Date: Wed, 04 Jul 2012 22:01:47 +0300 [thread overview]
Message-ID: <4FF4931B.7000708@iki.fi> (raw)
In-Reply-To: <4FF4911B.9090600@web.de>
On 07/04/2012 09:53 PM, André Weidemann wrote:
> On 04.07.2012 18:22, Antti Palosaari wrote:
>> On 07/04/2012 07:04 PM, Steve Hill wrote:
>>> >> Ps. Steve, could you please give me full version of kernel which
>>> >> works with pctv452e?
>>>
>>> I think it was 2.6.37-1-kirkwood from Debian which I was using (this is
>>> an ARM system).
>>>
>>> > As the new DVB-USB fixes many bugs I ask you to test it. I converted
>>> > pctv452e driver for you:
>>> >
>>> >
>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/pctv452e
>>>
>>> >
>>> > Only PCTV device supported currently, not TechnoTrend at that time.
>>>
>>> Can I ask why it only works on the PCTV devices? I was under the
>>> impression that the TechnoTrend hardware was identical?
>>>
>>>
>>> If you are able to provide any pointers as to where the TechnoTrend
>>> support is broken (or what debugging I should be turning on to figure
>>> out where it is broken) then that would be helpful.
>>
>> I don't have hardware, no PCTV neither TechnoTrend. I just converted
>> PCTV as Marx seems to have such device and he was blaming. Code wasn't
>> 100% similar, for example TechnoTrend has CI PCTV doesn't.
>>
>> It should not fix problems but it could since I fixed some nasty bugs.
>> Lets wait test report first and make decision what to do after that.
>
> The pctv452e and TT-connect S2-3600 are identical in hardware. Only USB
> IDs and remote control codes differ between the two. The Pinnacle box
> has its own remote. The TT-connect uses the same RC as the TT-budget
> series.
> The TT-connect S2-3650-CI has an additional CI slot.
OK. In addition to CI support and remote controller there was also
.read_mac_address() callback implemented for TechnoTrend. But as
.read_mac_address() is heavily optional and useless it could be possible
driver author just left it unimplemented for PCTV - or PCTV does not has
MAC address.
You seems to be marked as a one module author, I can guess you know reason?
Also if you has hardware, could you make some tests in order to get that
driver fixed :]
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-07-04 19:01 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-04 16:04 pctv452e Steve Hill
2012-07-04 16:22 ` pctv452e Antti Palosaari
2012-07-04 18:46 ` pctv452e Marx
2012-07-04 18:53 ` pctv452e André Weidemann
2012-07-04 19:01 ` Antti Palosaari [this message]
2012-07-05 13:14 ` pctv452e Marx
2012-07-05 14:23 ` pctv452e Antti Palosaari
2012-07-06 6:13 ` pctv452e Marx
2012-07-06 9:34 ` pctv452e Antti Palosaari
2012-07-06 11:04 ` pctv452e Marx
2012-07-06 18:24 ` pctv452e Antti Palosaari
2012-07-06 22:23 ` pctv452e Marx
2012-07-07 0:00 ` pctv452e Antti Palosaari
2012-07-07 23:07 ` pctv452e Marx
2012-07-08 12:32 ` pctv452e Antti Palosaari
2012-07-09 6:24 ` pctv452e Marx
2012-07-09 8:42 ` pctv452e Antti Palosaari
2012-07-09 16:44 ` pctv452e Marx
2012-07-09 17:38 ` pctv452e Antti Palosaari
2012-07-09 17:46 ` pctv452e Antti Palosaari
2012-07-10 6:39 ` pctv452e Marx
2012-07-10 9:33 ` pctv452e Antti Palosaari
2012-07-10 21:08 ` pctv452e Marx
2012-07-10 23:13 ` pctv452e Antti Palosaari
2012-07-11 6:25 ` pctv452e Marx
2012-07-11 10:00 ` pctv452e Antti Palosaari
2012-07-09 18:21 ` pctv452e poma
2012-07-10 6:43 ` pctv452e Marx
2012-07-10 15:51 ` pctv452e poma
2012-07-10 15:58 ` pctv452e Devin Heitmueller
2012-07-10 22:54 ` pctv452e poma
2012-08-03 16:56 ` pctv452e Steve Hill
-- strict thread matches above, loose matches on Subject: below --
2012-07-02 16:33 pctv452e Steve Hill
2012-07-03 7:46 ` pctv452e Marx
2012-07-03 23:04 ` pctv452e Antti Palosaari
2012-07-04 7:51 ` pctv452e Marx
2013-07-06 13:29 ` pctv452e Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF4931B.7000708@iki.fi \
--to=crope@iki.fi \
--cc=Andre.Weidemann@web.de \
--cc=linux-media@vger.kernel.org \
--cc=steve@nexusuk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).