From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:42103 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752463Ab2GIIm3 (ORCPT ); Mon, 9 Jul 2012 04:42:29 -0400 Message-ID: <4FFA996D.9010206@iki.fi> Date: Mon, 09 Jul 2012 11:42:21 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Marx CC: linux-media@vger.kernel.org Subject: Re: pctv452e References: <4FF4697C.8080602@nexusuk.org> <4FF46DC4.4070204@iki.fi> <4FF4911B.9090600@web.de> <4FF4931B.7000708@iki.fi> <4FF5A350.9070509@iki.fi> <4FF6B121.6010105@iki.fi> <9btic9-vd5.ln1@wuwek.kopernik.gliwice.pl> <835kc9-7p4.ln1@wuwek.kopernik.gliwice.pl> <4FF77C1B.50406@iki.fi> <4FF97DF8.4080208@iki.fi> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 07/09/2012 09:24 AM, Marx wrote: > On 08.07.2012 14:32, Antti Palosaari wrote: >> I suspect you stopped szap ? >> >> You cannot use dvbdate or dvbtraffic, nor read data from dvr0 unless >> frontend is tuned. Leave szap running backround and try again. > > That way it works, and I can save stream. Hovewer it's strange because I > shouldn't have to constatly tune channel to watch it, and on previous > cards it was enough to tune once and then use other commands. > I base my knowledge on > http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device > There is nothing about constant tuning channel to use it. Am I missing > something? given wiki-page says: " 4. After you've tuned a frequency and program a) You could now start up your simple TV watching application and decode the stream you have tuned. For example, while keeping {a,c,s,t}zap running in the first console shell, open up another console and run " Behavior have been always same, at least for the DVB USB. So you don't have problems at all? regards Antti -- http://palosaari.fi/