Re: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)

public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed

* Re: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
@ 2011-05-03 22:42 Adrian C.
  2011-05-06 17:37 ` Marko Ristola
  0 siblings, 1 reply; 12+ messages in thread
From: Adrian C. @ 2011-05-03 22:42 UTC (permalink / raw)
  To: linux-media

On Wed, 2 Mar 2011, Marko Ristola wrote:

> So this means, that my remote control works, pressing key with hex 
> value 0x26 works.

It works.

> Unfortunately mantis_uart.c doesn't have IR input initialization at 
> all

But it does not work. How can it work and not work at the same time?

I have the Skystar HD2 (b), subsystem: 1ae4:0003 now, same chipset as 
Cinergy S2 and some others, VP-1041. Lirc failed with my old COM 
receiver so I tried to use the cards IR as fall-back, and of course I 
failed again. This was on 2.6.38.4.

Only information I found is 1 year old[1]. "IR was in flux" but it still 
doesn't work even though mantis pulls in all those ir-* modules, no 
input device is created.

Can someone fill us in, please, will it be supported this year?

1. http://www.mail-archive.com/linux-media@vger.kernel.org/msg14641.html

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-03 22:42 Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver) Adrian C.
@ 2011-05-06 17:37 ` Marko Ristola
  2011-05-10 21:30   ` Adrian C.
  0 siblings, 1 reply; 12+ messages in thread
From: Marko Ristola @ 2011-05-06 17:37 UTC (permalink / raw)
  To: Adrian C.; +Cc: linux-media

04.05.2011 01:42, Adrian C. kirjoitti:
> On Wed, 2 Mar 2011, Marko Ristola wrote:
> 
>> So this means, that my remote control works, pressing key with hex 
>> value 0x26 works.
> 
> It works.
> 
>> Unfortunately mantis_uart.c doesn't have IR input initialization at 
>> all
> 
> But it does not work. How can it work and not work at the same time?
The hardware device is active (it is enabled, messages are sent from
the remote to the Kernel Mantis software driver.
The bytes can be logged into /var/log/messages file.

That's all the driver is designed to do at this point.

> 
> 
> I have the Skystar HD2 (b), subsystem: 1ae4:0003 now, same chipset as 
> Cinergy S2 and some others, VP-1041. Lirc failed with my old COM 
> receiver so I tried to use the cards IR as fall-back, and of course I 
> failed again. This was on 2.6.38.4.
> 
> Only information I found is 1 year old[1]. "IR was in flux" but it still 
> doesn't work even though mantis pulls in all those ir-* modules, no 
> input device is created.
> 
> Can someone fill us in, please, will it be supported this year?
Would you please ask from Manu Abraham. Maybe he gets paid for doing it.
I have experimented with my remote control too a few years ago,
but I think it is good if Manu gets it as a job.

Regards,
Marko Ristola

> 
> 
> 1. http://www.mail-archive.com/linux-media@vger.kernel.org/msg14641.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-06 17:37 ` Marko Ristola
@ 2011-05-10 21:30   ` Adrian C.
  2011-05-11 12:32     ` AW: " Christoph Pinkl
  2011-05-13 14:23     ` Christoph Pinkl
  0 siblings, 2 replies; 12+ messages in thread
From: Adrian C. @ 2011-05-10 21:30 UTC (permalink / raw)
  To: linux-media

On Fri, 6 May 2011, Marko Ristola wrote:

> The hardware device is active (it is enabled, messages are sent from 
> the remote to the Kernel Mantis software driver. The bytes can be 
> logged into /var/log/messages file.
> 
> That's all the driver is designed to do at this point.

It doesn't sound promising. Thanks for the update Marko.

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

^ permalink raw reply	[flat|nested] 12+ messages in thread

* AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-10 21:30   ` Adrian C.
@ 2011-05-11 12:32     ` Christoph Pinkl
  2011-05-13 14:23     ` Christoph Pinkl
  1 sibling, 0 replies; 12+ messages in thread
From: Christoph Pinkl @ 2011-05-11 12:32 UTC (permalink / raw)
  To: 'Adrian C.'; +Cc: linux-media

[-- Attachment #1: Type: text/plain, Size: 1383 bytes --]

Hello,

I've decided to rework my patch once again and send it to the list. 
It adds support for Remote-Control in the mantis driver and implements the
new rc-API.
The patch enables rc for the cards
- vp1041
- vp2033
- vp2040

It's only tested with a Terratec Cinergy S2 HD

Regards
Chris


I've reworked my patch using at home for 

> -----Ursprüngliche Nachricht-----
> Von: linux-media-owner@vger.kernel.org [mailto:linux-media-
> owner@vger.kernel.org] Im Auftrag von Adrian C.
> Gesendet: Dienstag, 10. Mai 2011 23:30
> An: linux-media@vger.kernel.org
> Betreff: Re: Remote control not working for Terratec Cinergy C (2.6.37
> Mantis driver)
> 
> On Fri, 6 May 2011, Marko Ristola wrote:
> 
> > The hardware device is active (it is enabled, messages are sent from
> > the remote to the Kernel Mantis software driver. The bytes can be
> > logged into /var/log/messages file.
> >
> > That's all the driver is designed to do at this point.
> 
> It doesn't sound promising. Thanks for the update Marko.
> 
> --
> Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
> PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: mantis_ir.patch --]
[-- Type: application/octet-stream, Size: 24979 bytes --]

diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 1402062..0b76664 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -107,7 +107,7 @@ static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index 05cbb9d..b859d05 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -49,6 +49,7 @@
 #include "mantis_pci.h"
 #include "mantis_i2c.h"
 #include "mantis_reg.h"
+#include "mantis_input.h"
 
 static unsigned int verbose;
 module_param(verbose, int, 0644);
@@ -115,7 +116,7 @@ static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
@@ -215,21 +216,32 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
 		goto fail4;
 	}
+
+	err = mantis_input_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT initialization failed <%d>", err);
+		goto fail6;
+	}
+
+
 	err = mantis_uart_init(mantis);
 	if (err < 0) {
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
-		goto fail6;
+		goto fail7;
 	}
 
 	devs++;
 
 	return err;
 
-
+fail7:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
 	mantis_uart_exit(mantis);
 
 fail6:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT exit! <%d>", err);
+	mantis_input_exit(mantis);
+
 fail4:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
 	mantis_dma_exit(mantis);
@@ -257,6 +269,7 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev)
 	if (mantis) {
 
 		mantis_uart_exit(mantis);
+		mantis_input_exit(mantis);
 		mantis_dvb_exit(mantis);
 		mantis_dma_exit(mantis);
 		mantis_i2c_exit(mantis);
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index bd400d2..181fdc6 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -23,6 +23,9 @@
 
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
 
 #include "mantis_uart.h"
 
@@ -91,6 +94,9 @@ struct mantis_hwconfig {
 	enum mantis_parity	parity;
 	u32			bytes;
 
+	char			*ir_codes;
+	void (*ir_work)(struct mantis_pci *mantis, u8 buf[]);
+
 	irqreturn_t (*irq_handler)(int irq, void *dev_id);
 	int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
 
@@ -100,6 +106,12 @@ struct mantis_hwconfig {
 	enum mantis_i2c_mode	i2c_mode;
 };
 
+struct mantis_ir {
+	struct rc_dev		*rc_dev;
+	char			rc_name[80];
+	char			rc_phys[80];
+};
+
 struct mantis_pci {
 	unsigned int		verbose;
 
@@ -167,13 +179,11 @@ struct mantis_pci {
 
 	struct mantis_ca	*mantis_ca;
 
-	wait_queue_head_t	uart_wq;
-	struct work_struct	uart_work;
-	spinlock_t		uart_lock;
+	struct tasklet_struct	uart_tasklet;
+
+	/* Remote Control handling */
+	struct mantis_ir	rc;
 
-	struct rc_dev		*rc;
-	char			input_name[80];
-	char			input_phys[80];
 };
 
 #define MANTIS_HIF_STATUS	(mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index db6d54d..3e32121 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,6 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
@@ -28,132 +27,88 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
 
 #define MODULE_NAME "mantis_core"
-#define RC_MAP_MANTIS "rc-mantis"
-
-static struct rc_map_table mantis_ir_table[] = {
-	{ 0x29, KEY_POWER	},
-	{ 0x28, KEY_FAVORITES	},
-	{ 0x30, KEY_TEXT	},
-	{ 0x17, KEY_INFO	}, /* Preview */
-	{ 0x23, KEY_EPG		},
-	{ 0x3b, KEY_F22		}, /* Record List */
-	{ 0x3c, KEY_1		},
-	{ 0x3e, KEY_2		},
-	{ 0x39, KEY_3		},
-	{ 0x36, KEY_4		},
-	{ 0x22, KEY_5		},
-	{ 0x20, KEY_6		},
-	{ 0x32, KEY_7		},
-	{ 0x26, KEY_8		},
-	{ 0x24, KEY_9		},
-	{ 0x2a, KEY_0		},
-
-	{ 0x33, KEY_CANCEL	},
-	{ 0x2c, KEY_BACK	},
-	{ 0x15, KEY_CLEAR	},
-	{ 0x3f, KEY_TAB		},
-	{ 0x10, KEY_ENTER	},
-	{ 0x14, KEY_UP		},
-	{ 0x0d, KEY_RIGHT	},
-	{ 0x0e, KEY_DOWN	},
-	{ 0x11, KEY_LEFT	},
-
-	{ 0x21, KEY_VOLUMEUP	},
-	{ 0x35, KEY_VOLUMEDOWN	},
-	{ 0x3d, KEY_CHANNELDOWN	},
-	{ 0x3a, KEY_CHANNELUP	},
-	{ 0x2e, KEY_RECORD	},
-	{ 0x2b, KEY_PLAY	},
-	{ 0x13, KEY_PAUSE	},
-	{ 0x25, KEY_STOP	},
-
-	{ 0x1f, KEY_REWIND	},
-	{ 0x2d, KEY_FASTFORWARD	},
-	{ 0x1e, KEY_PREVIOUS	}, /* Replay |< */
-	{ 0x1d, KEY_NEXT	}, /* Skip   >| */
-
-	{ 0x0b, KEY_CAMERA	}, /* Capture */
-	{ 0x0f, KEY_LANGUAGE	}, /* SAP */
-	{ 0x18, KEY_MODE	}, /* PIP */
-	{ 0x12, KEY_ZOOM	}, /* Full screen */
-	{ 0x1c, KEY_SUBTITLE	},
-	{ 0x2f, KEY_MUTE	},
-	{ 0x16, KEY_F20		}, /* L/R */
-	{ 0x38, KEY_F21		}, /* Hibernate */
-
-	{ 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
-	{ 0x31, KEY_AGAIN	}, /* Recall */
-	{ 0x1a, KEY_KPPLUS	}, /* Zoom+ */
-	{ 0x19, KEY_KPMINUS	}, /* Zoom- */
-	{ 0x27, KEY_RED		},
-	{ 0x0C, KEY_GREEN	},
-	{ 0x01, KEY_YELLOW	},
-	{ 0x00, KEY_BLUE	},
-};
-
-static struct rc_map_list ir_mantis_map = {
-	.map = {
-		.scan = mantis_ir_table,
-		.size = ARRAY_SIZE(mantis_ir_table),
-		.rc_type = RC_TYPE_UNKNOWN,
-		.name = RC_MAP_MANTIS,
-	}
-};
 
 int mantis_input_init(struct mantis_pci *mantis)
 {
-	struct rc_dev *dev;
+	struct rc_dev *rc_dev;
+	struct mantis_ir *mir = &mantis->rc;
 	int err;
 
-	err = rc_map_register(&ir_mantis_map);
-	if (err)
-		goto out;
 
-	dev = rc_allocate_device();
-	if (!dev) {
-		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
-		err = -ENOMEM;
-		goto out_map;
+	if (!mantis->hwconfig->ir_codes) {
+		dprintk(MANTIS_DEBUG, 1, "No RC codes available");
+		return 0;
 	}
 
-	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
-
-	dev->input_name         = mantis->input_name;
-	dev->input_phys         = mantis->input_phys;
-	dev->input_id.bustype   = BUS_PCI;
-	dev->input_id.vendor    = mantis->vendor_id;
-	dev->input_id.product   = mantis->device_id;
-	dev->input_id.version   = 1;
-	dev->driver_name        = MODULE_NAME;
-	dev->map_name           = RC_MAP_MANTIS;
-	dev->dev.parent         = &mantis->pdev->dev;
+	rc_dev = rc_allocate_device();
+	if (!rc_dev) {
+		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+		return -ENOMEM;
+	}
 
-	err = rc_register_device(dev);
+	mir->rc_dev = rc_dev;
+
+	snprintf(mir->rc_name, sizeof(mir->rc_name),
+		"Mantis %s IR Receiver", mantis->hwconfig->model_name);
+	snprintf(mir->rc_phys, sizeof(mir->rc_phys),
+		"pci-%s/ir0", pci_name(mantis->pdev));
+
+	dprintk(MANTIS_ERROR, 1, "Input device %s PCI: %s",
+		mir->rc_name, mir->rc_phys);
+
+	rc_dev->input_name = mir->rc_name;
+	rc_dev->input_phys = mir->rc_phys;
+	rc_dev->input_id.bustype = BUS_PCI;
+	rc_dev->input_id.vendor	= mantis->vendor_id;
+	rc_dev->input_id.product = mantis->device_id;
+	rc_dev->input_id.version = 1;
+	rc_dev->priv = mir;
+	rc_dev->driver_name = MODULE_NAME;
+	rc_dev->driver_type = RC_DRIVER_SCANCODE;
+	rc_dev->map_name = mantis->hwconfig->ir_codes;
+	rc_dev->allowed_protos = RC_TYPE_UNKNOWN;
+
+	err = rc_register_device(rc_dev);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		goto out_dev;
+		mir->rc_dev = NULL;
+		rc_free_device(rc_dev);
+		return -ENODEV;
 	}
 
-	mantis->rc = dev;
+	dprintk(MANTIS_INFO, 1, "Input device registered");
 	return 0;
-
-out_dev:
-	rc_free_device(dev);
-out_map:
-	rc_map_unregister(&ir_mantis_map);
-out:
-	return err;
 }
+EXPORT_SYMBOL_GPL(mantis_input_init);
 
-int mantis_exit(struct mantis_pci *mantis)
+void mantis_input_exit(struct mantis_pci *mantis)
 {
-	rc_unregister_device(mantis->rc);
-	rc_map_unregister(&ir_mantis_map);
-	return 0;
+	struct rc_dev *rc_dev = mantis->rc.rc_dev;
+
+	if (!rc_dev)
+		return;
+
+	rc_unregister_device(rc_dev);
+	mantis->rc.rc_dev = NULL;
 }
+EXPORT_SYMBOL_GPL(mantis_input_exit);
 
+void mantis_input_process(struct mantis_pci *mantis, u8 buf[])
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	struct mantis_ir *mir = &mantis->rc;
+	int i;
+
+	for (i = 0; i < (config->bytes + 1); i++) {
+		dprintk(MANTIS_ERROR, 0, "RC Input Sendkey:%d <%02x>\n", i, buf[i]);
+		rc_keydown(mir->rc_dev, buf[i], 0);
+		rc_keyup(mir->rc_dev);
+	}
+
+}
+EXPORT_SYMBOL_GPL(mantis_input_process);
diff --git a/drivers/media/dvb/mantis/mantis_input.h b/drivers/media/dvb/mantis/mantis_input.h
new file mode 100644
index 0000000..a00666f
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.h
@@ -0,0 +1,28 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MANTIS_INPUT_H
+#define __MANTIS_INPUT_H
+
+extern int mantis_input_init(struct mantis_pci *mantis);
+extern void mantis_input_exit(struct mantis_pci *mantis);
+extern void mantis_input_process(struct mantis_pci *mantis, u8 buf[]);
+
+#endif /* __MANTIS_INPUT_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index f807c8b..f6f343e 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -19,7 +19,6 @@
 */
 
 #include <linux/kernel.h>
-#include <linux/spinlock.h>
 
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -34,6 +33,7 @@
 #include "mantis_common.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
+#include "mantis_input.h"
 
 struct mantis_uart_params {
 	enum mantis_baud	baud_rate;
@@ -90,9 +90,9 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
 	return 0;
 }
 
-static void mantis_uart_work(struct work_struct *work)
+void mantis_uart_work(unsigned long data)
 {
-	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+	struct mantis_pci *mantis = (struct mantis_pci *) data;
 	struct mantis_hwconfig *config = mantis->hwconfig;
 	u8 buf[16];
 	int i;
@@ -101,8 +101,10 @@ static void mantis_uart_work(struct work_struct *work)
 
 	for (i = 0; i < (config->bytes + 1); i++)
 		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
-
 	dprintk(MANTIS_DEBUG, 0, "\n");
+
+	if (config->ir_work)
+		config->ir_work(mantis, buf);
 }
 
 static int mantis_uart_setup(struct mantis_pci *mantis,
@@ -151,10 +153,8 @@ int mantis_uart_init(struct mantis_pci *mantis)
 		rates[params.baud_rate].string,
 		parity[params.parity].string);
 
-	init_waitqueue_head(&mantis->uart_wq);
-	spin_lock_init(&mantis->uart_lock);
-
-	INIT_WORK(&mantis->uart_work, mantis_uart_work);
+	tasklet_init(&mantis->uart_tasklet, mantis_uart_work,
+		(unsigned long) mantis);
 
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
@@ -171,7 +171,6 @@ int mantis_uart_init(struct mantis_pci *mantis)
 	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
 	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
 
-	schedule_work(&mantis->uart_work);
 	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
 
 	return 0;
@@ -182,6 +181,5 @@ void mantis_uart_exit(struct mantis_pci *mantis)
 {
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
-	flush_work_sync(&mantis->uart_work);
 }
 EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index 38a436c..34da04a 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -29,6 +29,7 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp1041.h"
@@ -352,6 +353,9 @@ struct mantis_hwconfig vp1041_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TERRATEC_CINERGY_S2_HD,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp1041_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
index 06da0dd..20a9823 100644
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2033.h"
@@ -181,6 +182,9 @@ struct mantis_hwconfig vp2033_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TWINHAN_DTV_CAB_CI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2033_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
index f72b137..8c4da6b 100644
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2040.h"
@@ -180,6 +181,9 @@ struct mantis_hwconfig vp2040_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TERRATEC_CINERGY_C_PCI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2040_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index b57fc83..1237262 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -73,6 +73,8 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-streamzap.o \
 			rc-tbs-nec.o \
 			rc-technisat-usb2.o \
+			rc-terratec-cinergy-c-pci.o \
+			rc-terratec-cinergy-s2-hd.o \
 			rc-terratec-cinergy-xs.o \
 			rc-terratec-slim.o \
 			rc-terratec-slim-2.o \
@@ -81,6 +83,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-total-media-in-hand.o \
 			rc-trekstor.o \
 			rc-tt-1500.o \
+			rc-twinhan-dtv-cab-ci.o \
 			rc-twinhan1027.o \
 			rc-videomate-m1f.o \
 			rc-videomate-s350.o \
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
new file mode 100644
index 0000000..a381a4c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy C PCI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_c_pci[] = {
+	{ 0x3e, KEY_POWER},
+	{ 0x3d, KEY_1},
+	{ 0x3c, KEY_2},
+	{ 0x3b, KEY_3},
+	{ 0x3a, KEY_4},
+	{ 0x39, KEY_5},
+	{ 0x38, KEY_6},
+	{ 0x37, KEY_7},
+	{ 0x36, KEY_8},
+	{ 0x35, KEY_9},
+	{ 0x34, KEY_VIDEO_NEXT}, /* AV */
+	{ 0x33, KEY_0},
+	{ 0x32, KEY_REFRESH},
+	{ 0x30, KEY_EPG},
+	{ 0x2f, KEY_UP},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2d, KEY_OK},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2b, KEY_DOWN},
+	{ 0x29, KEY_INFO},
+	{ 0x28, KEY_RED},
+	{ 0x27, KEY_GREEN},
+	{ 0x26, KEY_YELLOW},
+	{ 0x25, KEY_BLUE},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x22, KEY_MUTE},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x1f, KEY_PAUSE},
+	{ 0x1e, KEY_HOME},
+	{ 0x1d, KEY_MENU}, /* DVD Menu */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1b, KEY_TEXT}, /* Teletext */
+	{ 0x1a, KEY_DELETE},
+	{ 0x19, KEY_TV},
+	{ 0x18, KEY_DVD},
+	{ 0x17, KEY_STOP},
+	{ 0x16, KEY_VIDEO},
+	{ 0x15, KEY_AUDIO}, /* Music */
+	{ 0x14, KEY_SCREEN}, /* Pic */
+	{ 0x13, KEY_PLAY},
+	{ 0x12, KEY_BACK},
+	{ 0x11, KEY_REWIND},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x07, KEY_RECORD},
+	{ 0x03, KEY_NEXT},
+
+};
+
+static struct rc_map_list terratec_cinergy_c_pci_map = {
+	.map = {
+		.scan    = terratec_cinergy_c_pci,
+		.size    = ARRAY_SIZE(terratec_cinergy_c_pci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_C_PCI,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_c_pci(void)
+{
+	return rc_map_register(&terratec_cinergy_c_pci_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_c_pci(void)
+{
+	rc_map_unregister(&terratec_cinergy_c_pci_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_c_pci)
+module_exit(exit_rc_map_terratec_cinergy_c_pci)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
new file mode 100644
index 0000000..56fa27f
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy S2 HD Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_s2_hd[] = {
+	{ 0x03, KEY_NEXT},
+	{ 0x07, KEY_RECORD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x11, KEY_REWIND},
+	{ 0x12, KEY_BACK},
+	{ 0x13, KEY_PLAYCD},
+	{ 0x14, KEY_F9},                /* DVD-Menu */
+	{ 0x15, KEY_AUDIO},
+	{ 0x16, KEY_VIDEO},
+	{ 0x17, KEY_STOPCD},
+	{ 0x18, KEY_DVD},
+	{ 0x19, KEY_TV},
+	{ 0x1a, KEY_DELETE},
+	{ 0x1b, KEY_TEXT},
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1d, KEY_F10},               /* Photos */
+	{ 0x1e, KEY_HOME},
+	{ 0x1f, KEY_PAUSECD},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x22, KEY_MUTE},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x25, KEY_BLUE},
+	{ 0x26, KEY_YELLOW},
+	{ 0x27, KEY_GREEN},
+	{ 0x28, KEY_RED},
+	{ 0x29, KEY_INFO},
+	{ 0x2b, KEY_DOWN},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2d, KEY_ENTER},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2f, KEY_UP},
+	{ 0x30, KEY_EPG},
+	{ 0x32, KEY_F5},
+	{ 0x33, KEY_0},
+	{ 0x34, KEY_VCR},
+	{ 0x35, KEY_9},
+	{ 0x36, KEY_8},
+	{ 0x37, KEY_7},
+	{ 0x38, KEY_6},
+	{ 0x39, KEY_5},
+	{ 0x3a, KEY_4},
+	{ 0x3b, KEY_3},
+	{ 0x3c, KEY_2},
+	{ 0x3d, KEY_1},
+	{ 0x3e, KEY_POWER},
+
+};
+
+static struct rc_map_list terratec_cinergy_s2_hd_map = {
+	.map = {
+		.scan    = terratec_cinergy_s2_hd,
+		.size    = ARRAY_SIZE(terratec_cinergy_s2_hd),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_S2_HD,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_s2_hd(void)
+{
+	return rc_map_register(&terratec_cinergy_s2_hd_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_s2_hd(void)
+{
+	rc_map_unregister(&terratec_cinergy_s2_hd_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_s2_hd)
+module_exit(exit_rc_map_terratec_cinergy_s2_hd)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
new file mode 100644
index 0000000..2b30374
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
@@ -0,0 +1,95 @@
+/* keytable for Twinhan DTV CAB CI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table twinhan_dtv_cab_ci[] = {
+	{ 0x29, KEY_POWER},
+	{ 0x28, KEY_FAVORITES},
+	{ 0x30, KEY_TEXT},
+	{ 0x17, KEY_INFO},              /* Preview */
+	{ 0x23, KEY_EPG},
+	{ 0x3b, KEY_F22},               /* Record List */
+
+	{ 0x3c, KEY_1},
+	{ 0x3e, KEY_2},
+	{ 0x39, KEY_3},
+	{ 0x36, KEY_4},
+	{ 0x22, KEY_5},
+	{ 0x20, KEY_6},
+	{ 0x32, KEY_7},
+	{ 0x26, KEY_8},
+	{ 0x24, KEY_9},
+	{ 0x2a, KEY_0},
+
+	{ 0x33, KEY_CANCEL},
+	{ 0x2c, KEY_BACK},
+	{ 0x15, KEY_CLEAR},
+	{ 0x3f, KEY_TAB},
+	{ 0x10, KEY_ENTER},
+	{ 0x14, KEY_UP},
+	{ 0x0d, KEY_RIGHT},
+	{ 0x0e, KEY_DOWN},
+	{ 0x11, KEY_LEFT},
+
+	{ 0x21, KEY_VOLUMEUP},
+	{ 0x35, KEY_VOLUMEDOWN},
+	{ 0x3d, KEY_CHANNELDOWN},
+	{ 0x3a, KEY_CHANNELUP},
+	{ 0x2e, KEY_RECORD},
+	{ 0x2b, KEY_PLAY},
+	{ 0x13, KEY_PAUSE},
+	{ 0x25, KEY_STOP},
+
+	{ 0x1f, KEY_REWIND},
+	{ 0x2d, KEY_FASTFORWARD},
+	{ 0x1e, KEY_PREVIOUS},          /* Replay |< */
+	{ 0x1d, KEY_NEXT},              /* Skip   >| */
+
+	{ 0x0b, KEY_CAMERA},            /* Capture */
+	{ 0x0f, KEY_LANGUAGE},          /* SAP */
+	{ 0x18, KEY_MODE},              /* PIP */
+	{ 0x12, KEY_ZOOM},              /* Full screen */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x2f, KEY_MUTE},
+	{ 0x16, KEY_F20},               /* L/R */
+	{ 0x38, KEY_F21},               /* Hibernate */
+
+	{ 0x37, KEY_SWITCHVIDEOMODE},   /* A/V */
+	{ 0x31, KEY_AGAIN},             /* Recall */
+	{ 0x1a, KEY_KPPLUS},            /* Zoom+ */
+	{ 0x19, KEY_KPMINUS},           /* Zoom- */
+	{ 0x27, KEY_RED},
+	{ 0x0C, KEY_GREEN},
+	{ 0x01, KEY_YELLOW},
+	{ 0x00, KEY_BLUE},
+};
+
+static struct rc_map_list twinhan_dtv_cab_ci_map = {
+	.map = {
+		.scan    = twinhan_dtv_cab_ci,
+		.size    = ARRAY_SIZE(twinhan_dtv_cab_ci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TWINHAN_DTV_CAB_CI,
+	}
+};
+
+static int __init init_rc_map_twinhan_dtv_cab_ci(void)
+{
+	return rc_map_register(&twinhan_dtv_cab_ci_map);
+}
+
+static void __exit exit_rc_map_twinhan_dtv_cab_ci(void)
+{
+	rc_map_unregister(&twinhan_dtv_cab_ci_map);
+}
+
+module_init(init_rc_map_twinhan_dtv_cab_ci)
+module_exit(exit_rc_map_twinhan_dtv_cab_ci)
+
+MODULE_LICENSE("GPL");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409e..8628f07 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -132,6 +132,8 @@ void rc_map_init(void);
 #define RC_MAP_STREAMZAP                 "rc-streamzap"
 #define RC_MAP_TBS_NEC                   "rc-tbs-nec"
 #define RC_MAP_TECHNISAT_USB2            "rc-technisat-usb2"
+#define RC_MAP_TERRATEC_CINERGY_C_PCI    "rc-terratec-cinergy-c-pci"
+#define RC_MAP_TERRATEC_CINERGY_S2_HD    "rc-terratec-cinergy-s2-hd"
 #define RC_MAP_TERRATEC_CINERGY_XS       "rc-terratec-cinergy-xs"
 #define RC_MAP_TERRATEC_SLIM             "rc-terratec-slim"
 #define RC_MAP_TERRATEC_SLIM_2           "rc-terratec-slim-2"
@@ -140,6 +142,7 @@ void rc_map_init(void);
 #define RC_MAP_TOTAL_MEDIA_IN_HAND       "rc-total-media-in-hand"
 #define RC_MAP_TREKSTOR                  "rc-trekstor"
 #define RC_MAP_TT_1500                   "rc-tt-1500"
+#define RC_MAP_TWINHAN_DTV_CAB_CI        "rc-twinhan-dtv-cab-ci"
 #define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
 #define RC_MAP_VIDEOMATE_M1F             "rc-videomate-m1f"
 #define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-10 21:30   ` Adrian C.
  2011-05-11 12:32     ` AW: " Christoph Pinkl
@ 2011-05-13 14:23     ` Christoph Pinkl
  2011-05-21  1:15       ` Adrian C.
  1 sibling, 1 reply; 12+ messages in thread
From: Christoph Pinkl @ 2011-05-13 14:23 UTC (permalink / raw)
  To: abraham.manu; +Cc: linux-media

[-- Attachment #1: Type: text/plain, Size: 322 bytes --]

Hello,

This patch is a rework of a old patch I've posted some time ago.
It adds support for Remote-Control in the mantis driver and implements the
new rc-API.
The patch enables rc for the cards
- vp1041
- vp2033
- vp2040

It's only tested with a Terratec Cinergy S2 HD.
Would be nice to get some Feedback.

Regards
Chris

[-- Attachment #2: mantis_ir.patch --]
[-- Type: application/octet-stream, Size: 24979 bytes --]

diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 1402062..0b76664 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -107,7 +107,7 @@ static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index 05cbb9d..b859d05 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -49,6 +49,7 @@
 #include "mantis_pci.h"
 #include "mantis_i2c.h"
 #include "mantis_reg.h"
+#include "mantis_input.h"
 
 static unsigned int verbose;
 module_param(verbose, int, 0644);
@@ -115,7 +116,7 @@ static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
@@ -215,21 +216,32 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
 		goto fail4;
 	}
+
+	err = mantis_input_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT initialization failed <%d>", err);
+		goto fail6;
+	}
+
+
 	err = mantis_uart_init(mantis);
 	if (err < 0) {
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
-		goto fail6;
+		goto fail7;
 	}
 
 	devs++;
 
 	return err;
 
-
+fail7:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
 	mantis_uart_exit(mantis);
 
 fail6:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT exit! <%d>", err);
+	mantis_input_exit(mantis);
+
 fail4:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
 	mantis_dma_exit(mantis);
@@ -257,6 +269,7 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev)
 	if (mantis) {
 
 		mantis_uart_exit(mantis);
+		mantis_input_exit(mantis);
 		mantis_dvb_exit(mantis);
 		mantis_dma_exit(mantis);
 		mantis_i2c_exit(mantis);
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index bd400d2..181fdc6 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -23,6 +23,9 @@
 
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
 
 #include "mantis_uart.h"
 
@@ -91,6 +94,9 @@ struct mantis_hwconfig {
 	enum mantis_parity	parity;
 	u32			bytes;
 
+	char			*ir_codes;
+	void (*ir_work)(struct mantis_pci *mantis, u8 buf[]);
+
 	irqreturn_t (*irq_handler)(int irq, void *dev_id);
 	int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
 
@@ -100,6 +106,12 @@ struct mantis_hwconfig {
 	enum mantis_i2c_mode	i2c_mode;
 };
 
+struct mantis_ir {
+	struct rc_dev		*rc_dev;
+	char			rc_name[80];
+	char			rc_phys[80];
+};
+
 struct mantis_pci {
 	unsigned int		verbose;
 
@@ -167,13 +179,11 @@ struct mantis_pci {
 
 	struct mantis_ca	*mantis_ca;
 
-	wait_queue_head_t	uart_wq;
-	struct work_struct	uart_work;
-	spinlock_t		uart_lock;
+	struct tasklet_struct	uart_tasklet;
+
+	/* Remote Control handling */
+	struct mantis_ir	rc;
 
-	struct rc_dev		*rc;
-	char			input_name[80];
-	char			input_phys[80];
 };
 
 #define MANTIS_HIF_STATUS	(mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index db6d54d..3e32121 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,6 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
@@ -28,132 +27,88 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
 
 #define MODULE_NAME "mantis_core"
-#define RC_MAP_MANTIS "rc-mantis"
-
-static struct rc_map_table mantis_ir_table[] = {
-	{ 0x29, KEY_POWER	},
-	{ 0x28, KEY_FAVORITES	},
-	{ 0x30, KEY_TEXT	},
-	{ 0x17, KEY_INFO	}, /* Preview */
-	{ 0x23, KEY_EPG		},
-	{ 0x3b, KEY_F22		}, /* Record List */
-	{ 0x3c, KEY_1		},
-	{ 0x3e, KEY_2		},
-	{ 0x39, KEY_3		},
-	{ 0x36, KEY_4		},
-	{ 0x22, KEY_5		},
-	{ 0x20, KEY_6		},
-	{ 0x32, KEY_7		},
-	{ 0x26, KEY_8		},
-	{ 0x24, KEY_9		},
-	{ 0x2a, KEY_0		},
-
-	{ 0x33, KEY_CANCEL	},
-	{ 0x2c, KEY_BACK	},
-	{ 0x15, KEY_CLEAR	},
-	{ 0x3f, KEY_TAB		},
-	{ 0x10, KEY_ENTER	},
-	{ 0x14, KEY_UP		},
-	{ 0x0d, KEY_RIGHT	},
-	{ 0x0e, KEY_DOWN	},
-	{ 0x11, KEY_LEFT	},
-
-	{ 0x21, KEY_VOLUMEUP	},
-	{ 0x35, KEY_VOLUMEDOWN	},
-	{ 0x3d, KEY_CHANNELDOWN	},
-	{ 0x3a, KEY_CHANNELUP	},
-	{ 0x2e, KEY_RECORD	},
-	{ 0x2b, KEY_PLAY	},
-	{ 0x13, KEY_PAUSE	},
-	{ 0x25, KEY_STOP	},
-
-	{ 0x1f, KEY_REWIND	},
-	{ 0x2d, KEY_FASTFORWARD	},
-	{ 0x1e, KEY_PREVIOUS	}, /* Replay |< */
-	{ 0x1d, KEY_NEXT	}, /* Skip   >| */
-
-	{ 0x0b, KEY_CAMERA	}, /* Capture */
-	{ 0x0f, KEY_LANGUAGE	}, /* SAP */
-	{ 0x18, KEY_MODE	}, /* PIP */
-	{ 0x12, KEY_ZOOM	}, /* Full screen */
-	{ 0x1c, KEY_SUBTITLE	},
-	{ 0x2f, KEY_MUTE	},
-	{ 0x16, KEY_F20		}, /* L/R */
-	{ 0x38, KEY_F21		}, /* Hibernate */
-
-	{ 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
-	{ 0x31, KEY_AGAIN	}, /* Recall */
-	{ 0x1a, KEY_KPPLUS	}, /* Zoom+ */
-	{ 0x19, KEY_KPMINUS	}, /* Zoom- */
-	{ 0x27, KEY_RED		},
-	{ 0x0C, KEY_GREEN	},
-	{ 0x01, KEY_YELLOW	},
-	{ 0x00, KEY_BLUE	},
-};
-
-static struct rc_map_list ir_mantis_map = {
-	.map = {
-		.scan = mantis_ir_table,
-		.size = ARRAY_SIZE(mantis_ir_table),
-		.rc_type = RC_TYPE_UNKNOWN,
-		.name = RC_MAP_MANTIS,
-	}
-};
 
 int mantis_input_init(struct mantis_pci *mantis)
 {
-	struct rc_dev *dev;
+	struct rc_dev *rc_dev;
+	struct mantis_ir *mir = &mantis->rc;
 	int err;
 
-	err = rc_map_register(&ir_mantis_map);
-	if (err)
-		goto out;
 
-	dev = rc_allocate_device();
-	if (!dev) {
-		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
-		err = -ENOMEM;
-		goto out_map;
+	if (!mantis->hwconfig->ir_codes) {
+		dprintk(MANTIS_DEBUG, 1, "No RC codes available");
+		return 0;
 	}
 
-	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
-
-	dev->input_name         = mantis->input_name;
-	dev->input_phys         = mantis->input_phys;
-	dev->input_id.bustype   = BUS_PCI;
-	dev->input_id.vendor    = mantis->vendor_id;
-	dev->input_id.product   = mantis->device_id;
-	dev->input_id.version   = 1;
-	dev->driver_name        = MODULE_NAME;
-	dev->map_name           = RC_MAP_MANTIS;
-	dev->dev.parent         = &mantis->pdev->dev;
+	rc_dev = rc_allocate_device();
+	if (!rc_dev) {
+		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+		return -ENOMEM;
+	}
 
-	err = rc_register_device(dev);
+	mir->rc_dev = rc_dev;
+
+	snprintf(mir->rc_name, sizeof(mir->rc_name),
+		"Mantis %s IR Receiver", mantis->hwconfig->model_name);
+	snprintf(mir->rc_phys, sizeof(mir->rc_phys),
+		"pci-%s/ir0", pci_name(mantis->pdev));
+
+	dprintk(MANTIS_ERROR, 1, "Input device %s PCI: %s",
+		mir->rc_name, mir->rc_phys);
+
+	rc_dev->input_name = mir->rc_name;
+	rc_dev->input_phys = mir->rc_phys;
+	rc_dev->input_id.bustype = BUS_PCI;
+	rc_dev->input_id.vendor	= mantis->vendor_id;
+	rc_dev->input_id.product = mantis->device_id;
+	rc_dev->input_id.version = 1;
+	rc_dev->priv = mir;
+	rc_dev->driver_name = MODULE_NAME;
+	rc_dev->driver_type = RC_DRIVER_SCANCODE;
+	rc_dev->map_name = mantis->hwconfig->ir_codes;
+	rc_dev->allowed_protos = RC_TYPE_UNKNOWN;
+
+	err = rc_register_device(rc_dev);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		goto out_dev;
+		mir->rc_dev = NULL;
+		rc_free_device(rc_dev);
+		return -ENODEV;
 	}
 
-	mantis->rc = dev;
+	dprintk(MANTIS_INFO, 1, "Input device registered");
 	return 0;
-
-out_dev:
-	rc_free_device(dev);
-out_map:
-	rc_map_unregister(&ir_mantis_map);
-out:
-	return err;
 }
+EXPORT_SYMBOL_GPL(mantis_input_init);
 
-int mantis_exit(struct mantis_pci *mantis)
+void mantis_input_exit(struct mantis_pci *mantis)
 {
-	rc_unregister_device(mantis->rc);
-	rc_map_unregister(&ir_mantis_map);
-	return 0;
+	struct rc_dev *rc_dev = mantis->rc.rc_dev;
+
+	if (!rc_dev)
+		return;
+
+	rc_unregister_device(rc_dev);
+	mantis->rc.rc_dev = NULL;
 }
+EXPORT_SYMBOL_GPL(mantis_input_exit);
 
+void mantis_input_process(struct mantis_pci *mantis, u8 buf[])
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	struct mantis_ir *mir = &mantis->rc;
+	int i;
+
+	for (i = 0; i < (config->bytes + 1); i++) {
+		dprintk(MANTIS_ERROR, 0, "RC Input Sendkey:%d <%02x>\n", i, buf[i]);
+		rc_keydown(mir->rc_dev, buf[i], 0);
+		rc_keyup(mir->rc_dev);
+	}
+
+}
+EXPORT_SYMBOL_GPL(mantis_input_process);
diff --git a/drivers/media/dvb/mantis/mantis_input.h b/drivers/media/dvb/mantis/mantis_input.h
new file mode 100644
index 0000000..a00666f
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.h
@@ -0,0 +1,28 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MANTIS_INPUT_H
+#define __MANTIS_INPUT_H
+
+extern int mantis_input_init(struct mantis_pci *mantis);
+extern void mantis_input_exit(struct mantis_pci *mantis);
+extern void mantis_input_process(struct mantis_pci *mantis, u8 buf[]);
+
+#endif /* __MANTIS_INPUT_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index f807c8b..f6f343e 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -19,7 +19,6 @@
 */
 
 #include <linux/kernel.h>
-#include <linux/spinlock.h>
 
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -34,6 +33,7 @@
 #include "mantis_common.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
+#include "mantis_input.h"
 
 struct mantis_uart_params {
 	enum mantis_baud	baud_rate;
@@ -90,9 +90,9 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
 	return 0;
 }
 
-static void mantis_uart_work(struct work_struct *work)
+void mantis_uart_work(unsigned long data)
 {
-	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+	struct mantis_pci *mantis = (struct mantis_pci *) data;
 	struct mantis_hwconfig *config = mantis->hwconfig;
 	u8 buf[16];
 	int i;
@@ -101,8 +101,10 @@ static void mantis_uart_work(struct work_struct *work)
 
 	for (i = 0; i < (config->bytes + 1); i++)
 		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
-
 	dprintk(MANTIS_DEBUG, 0, "\n");
+
+	if (config->ir_work)
+		config->ir_work(mantis, buf);
 }
 
 static int mantis_uart_setup(struct mantis_pci *mantis,
@@ -151,10 +153,8 @@ int mantis_uart_init(struct mantis_pci *mantis)
 		rates[params.baud_rate].string,
 		parity[params.parity].string);
 
-	init_waitqueue_head(&mantis->uart_wq);
-	spin_lock_init(&mantis->uart_lock);
-
-	INIT_WORK(&mantis->uart_work, mantis_uart_work);
+	tasklet_init(&mantis->uart_tasklet, mantis_uart_work,
+		(unsigned long) mantis);
 
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
@@ -171,7 +171,6 @@ int mantis_uart_init(struct mantis_pci *mantis)
 	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
 	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
 
-	schedule_work(&mantis->uart_work);
 	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
 
 	return 0;
@@ -182,6 +181,5 @@ void mantis_uart_exit(struct mantis_pci *mantis)
 {
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
-	flush_work_sync(&mantis->uart_work);
 }
 EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index 38a436c..34da04a 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -29,6 +29,7 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp1041.h"
@@ -352,6 +353,9 @@ struct mantis_hwconfig vp1041_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TERRATEC_CINERGY_S2_HD,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp1041_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
index 06da0dd..20a9823 100644
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2033.h"
@@ -181,6 +182,9 @@ struct mantis_hwconfig vp2033_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TWINHAN_DTV_CAB_CI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2033_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
index f72b137..8c4da6b 100644
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2040.h"
@@ -180,6 +181,9 @@ struct mantis_hwconfig vp2040_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TERRATEC_CINERGY_C_PCI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2040_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index b57fc83..1237262 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -73,6 +73,8 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-streamzap.o \
 			rc-tbs-nec.o \
 			rc-technisat-usb2.o \
+			rc-terratec-cinergy-c-pci.o \
+			rc-terratec-cinergy-s2-hd.o \
 			rc-terratec-cinergy-xs.o \
 			rc-terratec-slim.o \
 			rc-terratec-slim-2.o \
@@ -81,6 +83,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-total-media-in-hand.o \
 			rc-trekstor.o \
 			rc-tt-1500.o \
+			rc-twinhan-dtv-cab-ci.o \
 			rc-twinhan1027.o \
 			rc-videomate-m1f.o \
 			rc-videomate-s350.o \
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
new file mode 100644
index 0000000..a381a4c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy C PCI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_c_pci[] = {
+	{ 0x3e, KEY_POWER},
+	{ 0x3d, KEY_1},
+	{ 0x3c, KEY_2},
+	{ 0x3b, KEY_3},
+	{ 0x3a, KEY_4},
+	{ 0x39, KEY_5},
+	{ 0x38, KEY_6},
+	{ 0x37, KEY_7},
+	{ 0x36, KEY_8},
+	{ 0x35, KEY_9},
+	{ 0x34, KEY_VIDEO_NEXT}, /* AV */
+	{ 0x33, KEY_0},
+	{ 0x32, KEY_REFRESH},
+	{ 0x30, KEY_EPG},
+	{ 0x2f, KEY_UP},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2d, KEY_OK},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2b, KEY_DOWN},
+	{ 0x29, KEY_INFO},
+	{ 0x28, KEY_RED},
+	{ 0x27, KEY_GREEN},
+	{ 0x26, KEY_YELLOW},
+	{ 0x25, KEY_BLUE},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x22, KEY_MUTE},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x1f, KEY_PAUSE},
+	{ 0x1e, KEY_HOME},
+	{ 0x1d, KEY_MENU}, /* DVD Menu */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1b, KEY_TEXT}, /* Teletext */
+	{ 0x1a, KEY_DELETE},
+	{ 0x19, KEY_TV},
+	{ 0x18, KEY_DVD},
+	{ 0x17, KEY_STOP},
+	{ 0x16, KEY_VIDEO},
+	{ 0x15, KEY_AUDIO}, /* Music */
+	{ 0x14, KEY_SCREEN}, /* Pic */
+	{ 0x13, KEY_PLAY},
+	{ 0x12, KEY_BACK},
+	{ 0x11, KEY_REWIND},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x07, KEY_RECORD},
+	{ 0x03, KEY_NEXT},
+
+};
+
+static struct rc_map_list terratec_cinergy_c_pci_map = {
+	.map = {
+		.scan    = terratec_cinergy_c_pci,
+		.size    = ARRAY_SIZE(terratec_cinergy_c_pci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_C_PCI,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_c_pci(void)
+{
+	return rc_map_register(&terratec_cinergy_c_pci_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_c_pci(void)
+{
+	rc_map_unregister(&terratec_cinergy_c_pci_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_c_pci)
+module_exit(exit_rc_map_terratec_cinergy_c_pci)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
new file mode 100644
index 0000000..56fa27f
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy S2 HD Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_s2_hd[] = {
+	{ 0x03, KEY_NEXT},
+	{ 0x07, KEY_RECORD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x11, KEY_REWIND},
+	{ 0x12, KEY_BACK},
+	{ 0x13, KEY_PLAYCD},
+	{ 0x14, KEY_F9},                /* DVD-Menu */
+	{ 0x15, KEY_AUDIO},
+	{ 0x16, KEY_VIDEO},
+	{ 0x17, KEY_STOPCD},
+	{ 0x18, KEY_DVD},
+	{ 0x19, KEY_TV},
+	{ 0x1a, KEY_DELETE},
+	{ 0x1b, KEY_TEXT},
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1d, KEY_F10},               /* Photos */
+	{ 0x1e, KEY_HOME},
+	{ 0x1f, KEY_PAUSECD},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x22, KEY_MUTE},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x25, KEY_BLUE},
+	{ 0x26, KEY_YELLOW},
+	{ 0x27, KEY_GREEN},
+	{ 0x28, KEY_RED},
+	{ 0x29, KEY_INFO},
+	{ 0x2b, KEY_DOWN},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2d, KEY_ENTER},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2f, KEY_UP},
+	{ 0x30, KEY_EPG},
+	{ 0x32, KEY_F5},
+	{ 0x33, KEY_0},
+	{ 0x34, KEY_VCR},
+	{ 0x35, KEY_9},
+	{ 0x36, KEY_8},
+	{ 0x37, KEY_7},
+	{ 0x38, KEY_6},
+	{ 0x39, KEY_5},
+	{ 0x3a, KEY_4},
+	{ 0x3b, KEY_3},
+	{ 0x3c, KEY_2},
+	{ 0x3d, KEY_1},
+	{ 0x3e, KEY_POWER},
+
+};
+
+static struct rc_map_list terratec_cinergy_s2_hd_map = {
+	.map = {
+		.scan    = terratec_cinergy_s2_hd,
+		.size    = ARRAY_SIZE(terratec_cinergy_s2_hd),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_S2_HD,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_s2_hd(void)
+{
+	return rc_map_register(&terratec_cinergy_s2_hd_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_s2_hd(void)
+{
+	rc_map_unregister(&terratec_cinergy_s2_hd_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_s2_hd)
+module_exit(exit_rc_map_terratec_cinergy_s2_hd)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
new file mode 100644
index 0000000..2b30374
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
@@ -0,0 +1,95 @@
+/* keytable for Twinhan DTV CAB CI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table twinhan_dtv_cab_ci[] = {
+	{ 0x29, KEY_POWER},
+	{ 0x28, KEY_FAVORITES},
+	{ 0x30, KEY_TEXT},
+	{ 0x17, KEY_INFO},              /* Preview */
+	{ 0x23, KEY_EPG},
+	{ 0x3b, KEY_F22},               /* Record List */
+
+	{ 0x3c, KEY_1},
+	{ 0x3e, KEY_2},
+	{ 0x39, KEY_3},
+	{ 0x36, KEY_4},
+	{ 0x22, KEY_5},
+	{ 0x20, KEY_6},
+	{ 0x32, KEY_7},
+	{ 0x26, KEY_8},
+	{ 0x24, KEY_9},
+	{ 0x2a, KEY_0},
+
+	{ 0x33, KEY_CANCEL},
+	{ 0x2c, KEY_BACK},
+	{ 0x15, KEY_CLEAR},
+	{ 0x3f, KEY_TAB},
+	{ 0x10, KEY_ENTER},
+	{ 0x14, KEY_UP},
+	{ 0x0d, KEY_RIGHT},
+	{ 0x0e, KEY_DOWN},
+	{ 0x11, KEY_LEFT},
+
+	{ 0x21, KEY_VOLUMEUP},
+	{ 0x35, KEY_VOLUMEDOWN},
+	{ 0x3d, KEY_CHANNELDOWN},
+	{ 0x3a, KEY_CHANNELUP},
+	{ 0x2e, KEY_RECORD},
+	{ 0x2b, KEY_PLAY},
+	{ 0x13, KEY_PAUSE},
+	{ 0x25, KEY_STOP},
+
+	{ 0x1f, KEY_REWIND},
+	{ 0x2d, KEY_FASTFORWARD},
+	{ 0x1e, KEY_PREVIOUS},          /* Replay |< */
+	{ 0x1d, KEY_NEXT},              /* Skip   >| */
+
+	{ 0x0b, KEY_CAMERA},            /* Capture */
+	{ 0x0f, KEY_LANGUAGE},          /* SAP */
+	{ 0x18, KEY_MODE},              /* PIP */
+	{ 0x12, KEY_ZOOM},              /* Full screen */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x2f, KEY_MUTE},
+	{ 0x16, KEY_F20},               /* L/R */
+	{ 0x38, KEY_F21},               /* Hibernate */
+
+	{ 0x37, KEY_SWITCHVIDEOMODE},   /* A/V */
+	{ 0x31, KEY_AGAIN},             /* Recall */
+	{ 0x1a, KEY_KPPLUS},            /* Zoom+ */
+	{ 0x19, KEY_KPMINUS},           /* Zoom- */
+	{ 0x27, KEY_RED},
+	{ 0x0C, KEY_GREEN},
+	{ 0x01, KEY_YELLOW},
+	{ 0x00, KEY_BLUE},
+};
+
+static struct rc_map_list twinhan_dtv_cab_ci_map = {
+	.map = {
+		.scan    = twinhan_dtv_cab_ci,
+		.size    = ARRAY_SIZE(twinhan_dtv_cab_ci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TWINHAN_DTV_CAB_CI,
+	}
+};
+
+static int __init init_rc_map_twinhan_dtv_cab_ci(void)
+{
+	return rc_map_register(&twinhan_dtv_cab_ci_map);
+}
+
+static void __exit exit_rc_map_twinhan_dtv_cab_ci(void)
+{
+	rc_map_unregister(&twinhan_dtv_cab_ci_map);
+}
+
+module_init(init_rc_map_twinhan_dtv_cab_ci)
+module_exit(exit_rc_map_twinhan_dtv_cab_ci)
+
+MODULE_LICENSE("GPL");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409e..8628f07 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -132,6 +132,8 @@ void rc_map_init(void);
 #define RC_MAP_STREAMZAP                 "rc-streamzap"
 #define RC_MAP_TBS_NEC                   "rc-tbs-nec"
 #define RC_MAP_TECHNISAT_USB2            "rc-technisat-usb2"
+#define RC_MAP_TERRATEC_CINERGY_C_PCI    "rc-terratec-cinergy-c-pci"
+#define RC_MAP_TERRATEC_CINERGY_S2_HD    "rc-terratec-cinergy-s2-hd"
 #define RC_MAP_TERRATEC_CINERGY_XS       "rc-terratec-cinergy-xs"
 #define RC_MAP_TERRATEC_SLIM             "rc-terratec-slim"
 #define RC_MAP_TERRATEC_SLIM_2           "rc-terratec-slim-2"
@@ -140,6 +142,7 @@ void rc_map_init(void);
 #define RC_MAP_TOTAL_MEDIA_IN_HAND       "rc-total-media-in-hand"
 #define RC_MAP_TREKSTOR                  "rc-trekstor"
 #define RC_MAP_TT_1500                   "rc-tt-1500"
+#define RC_MAP_TWINHAN_DTV_CAB_CI        "rc-twinhan-dtv-cab-ci"
 #define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
 #define RC_MAP_VIDEOMATE_M1F             "rc-videomate-m1f"
 #define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-13 14:23     ` Christoph Pinkl
@ 2011-05-21  1:15       ` Adrian C.
  2011-05-21  7:04         ` Adrian C.
  2011-05-21  7:23         ` Adrian C.
  0 siblings, 2 replies; 12+ messages in thread
From: Adrian C. @ 2011-05-21  1:15 UTC (permalink / raw)
  To: Christoph Pinkl; +Cc: abraham.manu, linux-media

On Fri, 13 May 2011, Christoph Pinkl wrote:

> Would be nice to get some Feedback.

Hello, thanks for the patch. I've been waiting for 2.6.39 to hit the 
testing repository of my distribution before testing.

Should happen any day. I need that version because of sound driver 
fixes. I have the SS2 HD2, will report how it goes.

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-21  1:15       ` Adrian C.
@ 2011-05-21  7:04         ` Adrian C.
  2011-05-21  7:23         ` Adrian C.
  1 sibling, 0 replies; 12+ messages in thread
From: Adrian C. @ 2011-05-21  7:04 UTC (permalink / raw)
  To: Christoph Pinkl; +Cc: abraham.manu, linux-media

Hello, I got 2.6.39 so I tried this, on Technisat SkyStar2 HD2.

Device showed up as /dev/input/event3. ir-keytable does not show any 
protocols for it: 

Found /sys/class/rc/rc0/ (/dev/input/event3) with:
        Driver mantis_core, table rc-terratec-cinergy-s2-hd
        Supported protocols: 
        Enabled protocols: 
        Repeat delay = 500 ms, repeat period = 33 ms

I moved lircd to devinput driver, and downloaded this[1] to use as 
lircd.conf. Restarted lircd and started irw. Only half of the buttons on 
my universal remote control (very suitable for VDR) show up. Then I 
tried the original Technisat TTS35AI and almost all keys registered, all 
but button "0". 

1. http://lirc.sourceforge.net/remotes/devinput/lircd.conf.devinput

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-21  1:15       ` Adrian C.
  2011-05-21  7:04         ` Adrian C.
@ 2011-05-21  7:23         ` Adrian C.
  2011-05-21 16:19           ` Marko Ristola
  1 sibling, 1 reply; 12+ messages in thread
From: Adrian C. @ 2011-05-21  7:23 UTC (permalink / raw)
  To: Christoph Pinkl; +Cc: abraham.manu, linux-media

Haven't noticed earlier that every button press is executed twice, until 
I did some testing with Oxine. Not sure how much Lirc is to blame for 
this, and for button 0 not working. I will move to the Lirc list.

Thanks again for the patch.

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-21  7:23         ` Adrian C.
@ 2011-05-21 16:19           ` Marko Ristola
  2011-05-22 18:20             ` AW: " Christoph Pinkl
  0 siblings, 1 reply; 12+ messages in thread
From: Marko Ristola @ 2011-05-21 16:19 UTC (permalink / raw)
  To: Adrian C.; +Cc: Christoph Pinkl, abraham.manu, linux-media

I noticed that too on the C code:

If keypress comes from the remote control,
driver does both "push down" and "release" immediately.

Some years ago I made a version that did something like this:

I measured that a remote control sends "key pressed" in about 20ms cycles.

Thus I decided that the driver can do following:

Whe key '1' is pressed initially, send "key 1 pressed to input layer".

If within 30ms a '1 pressed' comes from the remote control, driver keeps '1' as pressed (do nothing for input layer).
If there won't come a '1 pressed' from remote within 30ms, then driver sends "key 1 unpressed to input layer".

I don't know if there is any reusable algorithm (easilly usable code) for remote control drivers for this.

Regards,
Marko Ristola

21.05.2011 10:23, Adrian C. kirjoitti:
> Haven't noticed earlier that every button press is executed twice, until 
> I did some testing with Oxine. Not sure how much Lirc is to blame for 
> this, and for button 0 not working. I will move to the Lirc list.
> 
> Thanks again for the patch.
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* AW: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-21 16:19           ` Marko Ristola
@ 2011-05-22 18:20             ` Christoph Pinkl
  2011-05-23  0:02               ` Adrian C.
  0 siblings, 1 reply; 12+ messages in thread
From: Christoph Pinkl @ 2011-05-22 18:20 UTC (permalink / raw)
  To: 'Marko Ristola', 'Adrian C.', 'Lou'
  Cc: linux-media, abraham.manu

[-- Attachment #1: Type: text/plain, Size: 243 bytes --]

Hello,

I've removed the rc_keyup call as the timeout release the key automatically.
This seems to work better.

I also added the possibility to define different keytables for boards with
different subsystems as Lou mentioned.

Regards
Chris


[-- Attachment #2: mantis_ir.patch --]
[-- Type: application/octet-stream, Size: 26433 bytes --]

diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 1402062..0b76664 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -107,7 +107,7 @@ static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index 05cbb9d..8eca749 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -49,6 +49,7 @@
 #include "mantis_pci.h"
 #include "mantis_i2c.h"
 #include "mantis_reg.h"
+#include "mantis_input.h"
 
 static unsigned int verbose;
 module_param(verbose, int, 0644);
@@ -115,7 +116,7 @@ static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
 	}
 	if (stat & MANTIS_INT_IRQ1) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
-		schedule_work(&mantis->uart_work);
+		tasklet_schedule(&mantis->uart_tasklet);
 	}
 	if (stat & MANTIS_INT_OCERR) {
 		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
@@ -180,6 +181,14 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
 	config->irq_handler	= &mantis_irq_handler;
 	mantis->hwconfig	= config;
 
+	if (mantis->hwconfig->config_init != NULL) {
+		dprintk(MANTIS_ERROR, 1,
+			"Mantis-subsystem: vendor:0x%04x, device:0x%04x\n",
+			mantis->pdev->subsystem_vendor,
+			mantis->pdev->subsystem_device);
+		mantis->hwconfig->config_init(mantis);
+	}
+
 	err = mantis_pci_init(mantis);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
@@ -215,21 +224,32 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
 		goto fail4;
 	}
+
+	err = mantis_input_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT initialization failed <%d>", err);
+		goto fail6;
+	}
+
+
 	err = mantis_uart_init(mantis);
 	if (err < 0) {
 		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
-		goto fail6;
+		goto fail7;
 	}
 
 	devs++;
 
 	return err;
 
-
+fail7:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
 	mantis_uart_exit(mantis);
 
 fail6:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT exit! <%d>", err);
+	mantis_input_exit(mantis);
+
 fail4:
 	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
 	mantis_dma_exit(mantis);
@@ -257,6 +277,7 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev)
 	if (mantis) {
 
 		mantis_uart_exit(mantis);
+		mantis_input_exit(mantis);
 		mantis_dvb_exit(mantis);
 		mantis_dma_exit(mantis);
 		mantis_i2c_exit(mantis);
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index bd400d2..a61046d 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -23,6 +23,9 @@
 
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
 
 #include "mantis_uart.h"
 
@@ -91,8 +94,12 @@ struct mantis_hwconfig {
 	enum mantis_parity	parity;
 	u32			bytes;
 
+	char			*ir_codes;
+	void (*ir_work)(struct mantis_pci *mantis, u8 buf[]);
+
 	irqreturn_t (*irq_handler)(int irq, void *dev_id);
 	int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+	void (*config_init)(struct mantis_pci *mantis);
 
 	u8			power;
 	u8			reset;
@@ -100,6 +107,12 @@ struct mantis_hwconfig {
 	enum mantis_i2c_mode	i2c_mode;
 };
 
+struct mantis_ir {
+	struct rc_dev		*rc_dev;
+	char			rc_name[80];
+	char			rc_phys[80];
+};
+
 struct mantis_pci {
 	unsigned int		verbose;
 
@@ -167,13 +180,11 @@ struct mantis_pci {
 
 	struct mantis_ca	*mantis_ca;
 
-	wait_queue_head_t	uart_wq;
-	struct work_struct	uart_work;
-	spinlock_t		uart_lock;
+	struct tasklet_struct	uart_tasklet;
+
+	/* Remote Control handling */
+	struct mantis_ir	rc;
 
-	struct rc_dev		*rc;
-	char			input_name[80];
-	char			input_phys[80];
 };
 
 #define MANTIS_HIF_STATUS	(mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index db6d54d..615429d 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,6 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
@@ -28,132 +27,87 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
 
 #define MODULE_NAME "mantis_core"
-#define RC_MAP_MANTIS "rc-mantis"
-
-static struct rc_map_table mantis_ir_table[] = {
-	{ 0x29, KEY_POWER	},
-	{ 0x28, KEY_FAVORITES	},
-	{ 0x30, KEY_TEXT	},
-	{ 0x17, KEY_INFO	}, /* Preview */
-	{ 0x23, KEY_EPG		},
-	{ 0x3b, KEY_F22		}, /* Record List */
-	{ 0x3c, KEY_1		},
-	{ 0x3e, KEY_2		},
-	{ 0x39, KEY_3		},
-	{ 0x36, KEY_4		},
-	{ 0x22, KEY_5		},
-	{ 0x20, KEY_6		},
-	{ 0x32, KEY_7		},
-	{ 0x26, KEY_8		},
-	{ 0x24, KEY_9		},
-	{ 0x2a, KEY_0		},
-
-	{ 0x33, KEY_CANCEL	},
-	{ 0x2c, KEY_BACK	},
-	{ 0x15, KEY_CLEAR	},
-	{ 0x3f, KEY_TAB		},
-	{ 0x10, KEY_ENTER	},
-	{ 0x14, KEY_UP		},
-	{ 0x0d, KEY_RIGHT	},
-	{ 0x0e, KEY_DOWN	},
-	{ 0x11, KEY_LEFT	},
-
-	{ 0x21, KEY_VOLUMEUP	},
-	{ 0x35, KEY_VOLUMEDOWN	},
-	{ 0x3d, KEY_CHANNELDOWN	},
-	{ 0x3a, KEY_CHANNELUP	},
-	{ 0x2e, KEY_RECORD	},
-	{ 0x2b, KEY_PLAY	},
-	{ 0x13, KEY_PAUSE	},
-	{ 0x25, KEY_STOP	},
-
-	{ 0x1f, KEY_REWIND	},
-	{ 0x2d, KEY_FASTFORWARD	},
-	{ 0x1e, KEY_PREVIOUS	}, /* Replay |< */
-	{ 0x1d, KEY_NEXT	}, /* Skip   >| */
-
-	{ 0x0b, KEY_CAMERA	}, /* Capture */
-	{ 0x0f, KEY_LANGUAGE	}, /* SAP */
-	{ 0x18, KEY_MODE	}, /* PIP */
-	{ 0x12, KEY_ZOOM	}, /* Full screen */
-	{ 0x1c, KEY_SUBTITLE	},
-	{ 0x2f, KEY_MUTE	},
-	{ 0x16, KEY_F20		}, /* L/R */
-	{ 0x38, KEY_F21		}, /* Hibernate */
-
-	{ 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
-	{ 0x31, KEY_AGAIN	}, /* Recall */
-	{ 0x1a, KEY_KPPLUS	}, /* Zoom+ */
-	{ 0x19, KEY_KPMINUS	}, /* Zoom- */
-	{ 0x27, KEY_RED		},
-	{ 0x0C, KEY_GREEN	},
-	{ 0x01, KEY_YELLOW	},
-	{ 0x00, KEY_BLUE	},
-};
-
-static struct rc_map_list ir_mantis_map = {
-	.map = {
-		.scan = mantis_ir_table,
-		.size = ARRAY_SIZE(mantis_ir_table),
-		.rc_type = RC_TYPE_UNKNOWN,
-		.name = RC_MAP_MANTIS,
-	}
-};
 
 int mantis_input_init(struct mantis_pci *mantis)
 {
-	struct rc_dev *dev;
+	struct rc_dev *rc_dev;
+	struct mantis_ir *mir = &mantis->rc;
 	int err;
 
-	err = rc_map_register(&ir_mantis_map);
-	if (err)
-		goto out;
 
-	dev = rc_allocate_device();
-	if (!dev) {
-		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
-		err = -ENOMEM;
-		goto out_map;
+	if (!mantis->hwconfig->ir_codes) {
+		dprintk(MANTIS_DEBUG, 1, "No RC codes available");
+		return 0;
 	}
 
-	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
-
-	dev->input_name         = mantis->input_name;
-	dev->input_phys         = mantis->input_phys;
-	dev->input_id.bustype   = BUS_PCI;
-	dev->input_id.vendor    = mantis->vendor_id;
-	dev->input_id.product   = mantis->device_id;
-	dev->input_id.version   = 1;
-	dev->driver_name        = MODULE_NAME;
-	dev->map_name           = RC_MAP_MANTIS;
-	dev->dev.parent         = &mantis->pdev->dev;
+	rc_dev = rc_allocate_device();
+	if (!rc_dev) {
+		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+		return -ENOMEM;
+	}
 
-	err = rc_register_device(dev);
+	mir->rc_dev = rc_dev;
+
+	snprintf(mir->rc_name, sizeof(mir->rc_name),
+		"Mantis %s IR Receiver", mantis->hwconfig->model_name);
+	snprintf(mir->rc_phys, sizeof(mir->rc_phys),
+		"pci-%s/ir0", pci_name(mantis->pdev));
+
+	dprintk(MANTIS_ERROR, 1, "Input device %s PCI: %s",
+		mir->rc_name, mir->rc_phys);
+
+	rc_dev->input_name = mir->rc_name;
+	rc_dev->input_phys = mir->rc_phys;
+	rc_dev->input_id.bustype = BUS_PCI;
+	rc_dev->input_id.vendor	= mantis->vendor_id;
+	rc_dev->input_id.product = mantis->device_id;
+	rc_dev->input_id.version = 1;
+	rc_dev->priv = mir;
+	rc_dev->driver_name = MODULE_NAME;
+	rc_dev->driver_type = RC_DRIVER_SCANCODE;
+	rc_dev->map_name = mantis->hwconfig->ir_codes;
+	rc_dev->allowed_protos = RC_TYPE_UNKNOWN;
+
+	err = rc_register_device(rc_dev);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		goto out_dev;
+		mir->rc_dev = NULL;
+		rc_free_device(rc_dev);
+		return -ENODEV;
 	}
 
-	mantis->rc = dev;
+	dprintk(MANTIS_INFO, 1, "Input device registered");
 	return 0;
-
-out_dev:
-	rc_free_device(dev);
-out_map:
-	rc_map_unregister(&ir_mantis_map);
-out:
-	return err;
 }
+EXPORT_SYMBOL_GPL(mantis_input_init);
 
-int mantis_exit(struct mantis_pci *mantis)
+void mantis_input_exit(struct mantis_pci *mantis)
 {
-	rc_unregister_device(mantis->rc);
-	rc_map_unregister(&ir_mantis_map);
-	return 0;
+	struct rc_dev *rc_dev = mantis->rc.rc_dev;
+
+	if (!rc_dev)
+		return;
+
+	rc_unregister_device(rc_dev);
+	mantis->rc.rc_dev = NULL;
 }
+EXPORT_SYMBOL_GPL(mantis_input_exit);
+
+void mantis_input_process(struct mantis_pci *mantis, u8 buf[])
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	struct mantis_ir *mir = &mantis->rc;
+	int i;
 
+	for (i = 0; i < (config->bytes + 1); i++) {
+		dprintk(MANTIS_ERROR, 0, "RC Input Sendkey:%d <%02x>\n", i, buf[i]);
+		rc_keydown(mir->rc_dev, buf[i], 0);
+	}
+
+}
+EXPORT_SYMBOL_GPL(mantis_input_process);
diff --git a/drivers/media/dvb/mantis/mantis_input.h b/drivers/media/dvb/mantis/mantis_input.h
new file mode 100644
index 0000000..a00666f
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.h
@@ -0,0 +1,28 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MANTIS_INPUT_H
+#define __MANTIS_INPUT_H
+
+extern int mantis_input_init(struct mantis_pci *mantis);
+extern void mantis_input_exit(struct mantis_pci *mantis);
+extern void mantis_input_process(struct mantis_pci *mantis, u8 buf[]);
+
+#endif /* __MANTIS_INPUT_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index f807c8b..f6f343e 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -19,7 +19,6 @@
 */
 
 #include <linux/kernel.h>
-#include <linux/spinlock.h>
 
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -34,6 +33,7 @@
 #include "mantis_common.h"
 #include "mantis_reg.h"
 #include "mantis_uart.h"
+#include "mantis_input.h"
 
 struct mantis_uart_params {
 	enum mantis_baud	baud_rate;
@@ -90,9 +90,9 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
 	return 0;
 }
 
-static void mantis_uart_work(struct work_struct *work)
+void mantis_uart_work(unsigned long data)
 {
-	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+	struct mantis_pci *mantis = (struct mantis_pci *) data;
 	struct mantis_hwconfig *config = mantis->hwconfig;
 	u8 buf[16];
 	int i;
@@ -101,8 +101,10 @@ static void mantis_uart_work(struct work_struct *work)
 
 	for (i = 0; i < (config->bytes + 1); i++)
 		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
-
 	dprintk(MANTIS_DEBUG, 0, "\n");
+
+	if (config->ir_work)
+		config->ir_work(mantis, buf);
 }
 
 static int mantis_uart_setup(struct mantis_pci *mantis,
@@ -151,10 +153,8 @@ int mantis_uart_init(struct mantis_pci *mantis)
 		rates[params.baud_rate].string,
 		parity[params.parity].string);
 
-	init_waitqueue_head(&mantis->uart_wq);
-	spin_lock_init(&mantis->uart_lock);
-
-	INIT_WORK(&mantis->uart_work, mantis_uart_work);
+	tasklet_init(&mantis->uart_tasklet, mantis_uart_work,
+		(unsigned long) mantis);
 
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
@@ -171,7 +171,6 @@ int mantis_uart_init(struct mantis_pci *mantis)
 	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
 	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
 
-	schedule_work(&mantis->uart_work);
 	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
 
 	return 0;
@@ -182,6 +181,5 @@ void mantis_uart_exit(struct mantis_pci *mantis)
 {
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
-	flush_work_sync(&mantis->uart_work);
 }
 EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index 38a436c..9b72fdc 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -21,6 +21,8 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
+#include <linux/pci.h>
+
 
 #include "dmxdev.h"
 #include "dvbdev.h"
@@ -29,6 +31,7 @@
 #include "dvb_net.h"
 
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp1041.h"
@@ -343,6 +346,19 @@ static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	return 0;
 }
 
+static void vp1041_config_init(struct mantis_pci *mantis) {
+	struct mantis_hwconfig *config = mantis->hwconfig;
+
+	switch (mantis->pdev->subsystem_vendor) {
+	case TWINHAN_TECHNOLOGIES:
+		if (mantis->pdev->subsystem_device == MANTIS_VP_1041_DVB_S2)
+                        config->ir_codes = RC_MAP_TWINHAN_DTV_CAB_CI;
+		break;
+	default:
+		config->ir_codes = RC_MAP_TERRATEC_CINERGY_S2_HD;
+	}
+}
+
 struct mantis_hwconfig vp1041_config = {
 	.model_name	= MANTIS_MODEL_NAME,
 	.dev_type	= MANTIS_DEV_TYPE,
@@ -352,6 +368,9 @@ struct mantis_hwconfig vp1041_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_work	= mantis_input_process,
+
+	.config_init	= vp1041_config_init,
 	.frontend_init	= vp1041_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
index 06da0dd..20a9823 100644
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2033.h"
@@ -181,6 +182,9 @@ struct mantis_hwconfig vp2033_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TWINHAN_DTV_CAB_CI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2033_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
index f72b137..8c4da6b 100644
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -30,6 +30,7 @@
 
 #include "tda1002x.h"
 #include "mantis_common.h"
+#include "mantis_input.h"
 #include "mantis_ioc.h"
 #include "mantis_dvb.h"
 #include "mantis_vp2040.h"
@@ -180,6 +181,9 @@ struct mantis_hwconfig vp2040_config = {
 	.parity		= MANTIS_PARITY_NONE,
 	.bytes		= 0,
 
+	.ir_codes	= RC_MAP_TERRATEC_CINERGY_C_PCI,
+	.ir_work	= mantis_input_process,
+
 	.frontend_init	= vp2040_frontend_init,
 	.power		= GPIF_A12,
 	.reset		= GPIF_A13,
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index b57fc83..1237262 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -73,6 +73,8 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-streamzap.o \
 			rc-tbs-nec.o \
 			rc-technisat-usb2.o \
+			rc-terratec-cinergy-c-pci.o \
+			rc-terratec-cinergy-s2-hd.o \
 			rc-terratec-cinergy-xs.o \
 			rc-terratec-slim.o \
 			rc-terratec-slim-2.o \
@@ -81,6 +83,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-total-media-in-hand.o \
 			rc-trekstor.o \
 			rc-tt-1500.o \
+			rc-twinhan-dtv-cab-ci.o \
 			rc-twinhan1027.o \
 			rc-videomate-m1f.o \
 			rc-videomate-s350.o \
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
new file mode 100644
index 0000000..a381a4c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy C PCI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_c_pci[] = {
+	{ 0x3e, KEY_POWER},
+	{ 0x3d, KEY_1},
+	{ 0x3c, KEY_2},
+	{ 0x3b, KEY_3},
+	{ 0x3a, KEY_4},
+	{ 0x39, KEY_5},
+	{ 0x38, KEY_6},
+	{ 0x37, KEY_7},
+	{ 0x36, KEY_8},
+	{ 0x35, KEY_9},
+	{ 0x34, KEY_VIDEO_NEXT}, /* AV */
+	{ 0x33, KEY_0},
+	{ 0x32, KEY_REFRESH},
+	{ 0x30, KEY_EPG},
+	{ 0x2f, KEY_UP},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2d, KEY_OK},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2b, KEY_DOWN},
+	{ 0x29, KEY_INFO},
+	{ 0x28, KEY_RED},
+	{ 0x27, KEY_GREEN},
+	{ 0x26, KEY_YELLOW},
+	{ 0x25, KEY_BLUE},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x22, KEY_MUTE},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x1f, KEY_PAUSE},
+	{ 0x1e, KEY_HOME},
+	{ 0x1d, KEY_MENU}, /* DVD Menu */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1b, KEY_TEXT}, /* Teletext */
+	{ 0x1a, KEY_DELETE},
+	{ 0x19, KEY_TV},
+	{ 0x18, KEY_DVD},
+	{ 0x17, KEY_STOP},
+	{ 0x16, KEY_VIDEO},
+	{ 0x15, KEY_AUDIO}, /* Music */
+	{ 0x14, KEY_SCREEN}, /* Pic */
+	{ 0x13, KEY_PLAY},
+	{ 0x12, KEY_BACK},
+	{ 0x11, KEY_REWIND},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x07, KEY_RECORD},
+	{ 0x03, KEY_NEXT},
+
+};
+
+static struct rc_map_list terratec_cinergy_c_pci_map = {
+	.map = {
+		.scan    = terratec_cinergy_c_pci,
+		.size    = ARRAY_SIZE(terratec_cinergy_c_pci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_C_PCI,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_c_pci(void)
+{
+	return rc_map_register(&terratec_cinergy_c_pci_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_c_pci(void)
+{
+	rc_map_unregister(&terratec_cinergy_c_pci_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_c_pci)
+module_exit(exit_rc_map_terratec_cinergy_c_pci)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
new file mode 100644
index 0000000..56fa27f
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy S2 HD Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_s2_hd[] = {
+	{ 0x03, KEY_NEXT},
+	{ 0x07, KEY_RECORD},
+	{ 0x0b, KEY_PREVIOUS},
+	{ 0x10, KEY_FASTFORWARD},
+	{ 0x11, KEY_REWIND},
+	{ 0x12, KEY_BACK},
+	{ 0x13, KEY_PLAYCD},
+	{ 0x14, KEY_F9},                /* DVD-Menu */
+	{ 0x15, KEY_AUDIO},
+	{ 0x16, KEY_VIDEO},
+	{ 0x17, KEY_STOPCD},
+	{ 0x18, KEY_DVD},
+	{ 0x19, KEY_TV},
+	{ 0x1a, KEY_DELETE},
+	{ 0x1b, KEY_TEXT},
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x1d, KEY_F10},               /* Photos */
+	{ 0x1e, KEY_HOME},
+	{ 0x1f, KEY_PAUSECD},
+	{ 0x20, KEY_CHANNELDOWN},
+	{ 0x21, KEY_VOLUMEDOWN},
+	{ 0x22, KEY_MUTE},
+	{ 0x23, KEY_VOLUMEUP},
+	{ 0x24, KEY_CHANNELUP},
+	{ 0x25, KEY_BLUE},
+	{ 0x26, KEY_YELLOW},
+	{ 0x27, KEY_GREEN},
+	{ 0x28, KEY_RED},
+	{ 0x29, KEY_INFO},
+	{ 0x2b, KEY_DOWN},
+	{ 0x2c, KEY_RIGHT},
+	{ 0x2d, KEY_ENTER},
+	{ 0x2e, KEY_LEFT},
+	{ 0x2f, KEY_UP},
+	{ 0x30, KEY_EPG},
+	{ 0x32, KEY_F5},
+	{ 0x33, KEY_0},
+	{ 0x34, KEY_VCR},
+	{ 0x35, KEY_9},
+	{ 0x36, KEY_8},
+	{ 0x37, KEY_7},
+	{ 0x38, KEY_6},
+	{ 0x39, KEY_5},
+	{ 0x3a, KEY_4},
+	{ 0x3b, KEY_3},
+	{ 0x3c, KEY_2},
+	{ 0x3d, KEY_1},
+	{ 0x3e, KEY_POWER},
+
+};
+
+static struct rc_map_list terratec_cinergy_s2_hd_map = {
+	.map = {
+		.scan    = terratec_cinergy_s2_hd,
+		.size    = ARRAY_SIZE(terratec_cinergy_s2_hd),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_S2_HD,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_s2_hd(void)
+{
+	return rc_map_register(&terratec_cinergy_s2_hd_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_s2_hd(void)
+{
+	rc_map_unregister(&terratec_cinergy_s2_hd_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_s2_hd)
+module_exit(exit_rc_map_terratec_cinergy_s2_hd)
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
new file mode 100644
index 0000000..2b30374
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c
@@ -0,0 +1,95 @@
+/* keytable for Twinhan DTV CAB CI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table twinhan_dtv_cab_ci[] = {
+	{ 0x29, KEY_POWER},
+	{ 0x28, KEY_FAVORITES},
+	{ 0x30, KEY_TEXT},
+	{ 0x17, KEY_INFO},              /* Preview */
+	{ 0x23, KEY_EPG},
+	{ 0x3b, KEY_F22},               /* Record List */
+
+	{ 0x3c, KEY_1},
+	{ 0x3e, KEY_2},
+	{ 0x39, KEY_3},
+	{ 0x36, KEY_4},
+	{ 0x22, KEY_5},
+	{ 0x20, KEY_6},
+	{ 0x32, KEY_7},
+	{ 0x26, KEY_8},
+	{ 0x24, KEY_9},
+	{ 0x2a, KEY_0},
+
+	{ 0x33, KEY_CANCEL},
+	{ 0x2c, KEY_BACK},
+	{ 0x15, KEY_CLEAR},
+	{ 0x3f, KEY_TAB},
+	{ 0x10, KEY_ENTER},
+	{ 0x14, KEY_UP},
+	{ 0x0d, KEY_RIGHT},
+	{ 0x0e, KEY_DOWN},
+	{ 0x11, KEY_LEFT},
+
+	{ 0x21, KEY_VOLUMEUP},
+	{ 0x35, KEY_VOLUMEDOWN},
+	{ 0x3d, KEY_CHANNELDOWN},
+	{ 0x3a, KEY_CHANNELUP},
+	{ 0x2e, KEY_RECORD},
+	{ 0x2b, KEY_PLAY},
+	{ 0x13, KEY_PAUSE},
+	{ 0x25, KEY_STOP},
+
+	{ 0x1f, KEY_REWIND},
+	{ 0x2d, KEY_FASTFORWARD},
+	{ 0x1e, KEY_PREVIOUS},          /* Replay |< */
+	{ 0x1d, KEY_NEXT},              /* Skip   >| */
+
+	{ 0x0b, KEY_CAMERA},            /* Capture */
+	{ 0x0f, KEY_LANGUAGE},          /* SAP */
+	{ 0x18, KEY_MODE},              /* PIP */
+	{ 0x12, KEY_ZOOM},              /* Full screen */
+	{ 0x1c, KEY_SUBTITLE},
+	{ 0x2f, KEY_MUTE},
+	{ 0x16, KEY_F20},               /* L/R */
+	{ 0x38, KEY_F21},               /* Hibernate */
+
+	{ 0x37, KEY_SWITCHVIDEOMODE},   /* A/V */
+	{ 0x31, KEY_AGAIN},             /* Recall */
+	{ 0x1a, KEY_KPPLUS},            /* Zoom+ */
+	{ 0x19, KEY_KPMINUS},           /* Zoom- */
+	{ 0x27, KEY_RED},
+	{ 0x0C, KEY_GREEN},
+	{ 0x01, KEY_YELLOW},
+	{ 0x00, KEY_BLUE},
+};
+
+static struct rc_map_list twinhan_dtv_cab_ci_map = {
+	.map = {
+		.scan    = twinhan_dtv_cab_ci,
+		.size    = ARRAY_SIZE(twinhan_dtv_cab_ci),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TWINHAN_DTV_CAB_CI,
+	}
+};
+
+static int __init init_rc_map_twinhan_dtv_cab_ci(void)
+{
+	return rc_map_register(&twinhan_dtv_cab_ci_map);
+}
+
+static void __exit exit_rc_map_twinhan_dtv_cab_ci(void)
+{
+	rc_map_unregister(&twinhan_dtv_cab_ci_map);
+}
+
+module_init(init_rc_map_twinhan_dtv_cab_ci)
+module_exit(exit_rc_map_twinhan_dtv_cab_ci)
+
+MODULE_LICENSE("GPL");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409e..8628f07 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -132,6 +132,8 @@ void rc_map_init(void);
 #define RC_MAP_STREAMZAP                 "rc-streamzap"
 #define RC_MAP_TBS_NEC                   "rc-tbs-nec"
 #define RC_MAP_TECHNISAT_USB2            "rc-technisat-usb2"
+#define RC_MAP_TERRATEC_CINERGY_C_PCI    "rc-terratec-cinergy-c-pci"
+#define RC_MAP_TERRATEC_CINERGY_S2_HD    "rc-terratec-cinergy-s2-hd"
 #define RC_MAP_TERRATEC_CINERGY_XS       "rc-terratec-cinergy-xs"
 #define RC_MAP_TERRATEC_SLIM             "rc-terratec-slim"
 #define RC_MAP_TERRATEC_SLIM_2           "rc-terratec-slim-2"
@@ -140,6 +142,7 @@ void rc_map_init(void);
 #define RC_MAP_TOTAL_MEDIA_IN_HAND       "rc-total-media-in-hand"
 #define RC_MAP_TREKSTOR                  "rc-trekstor"
 #define RC_MAP_TT_1500                   "rc-tt-1500"
+#define RC_MAP_TWINHAN_DTV_CAB_CI        "rc-twinhan-dtv-cab-ci"
 #define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
 #define RC_MAP_VIDEOMATE_M1F             "rc-videomate-m1f"
 #define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: AW: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-22 18:20             ` AW: " Christoph Pinkl
@ 2011-05-23  0:02               ` Adrian C.
  2011-07-14  7:59                 ` D. R.
  0 siblings, 1 reply; 12+ messages in thread
From: Adrian C. @ 2011-05-23  0:02 UTC (permalink / raw)
  To: Christoph Pinkl; +Cc: linux-media, abraham.manu, tuxoholic, marko.ristola

On Sun, 22 May 2011, Christoph Pinkl wrote:

> I've removed the rc_keyup call as the timeout release the key 
> automatically. This seems to work better.

Yes it does! Thank you very much.


-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: AW: AW: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
  2011-05-23  0:02               ` Adrian C.
@ 2011-07-14  7:59                 ` D. R.
  0 siblings, 0 replies; 12+ messages in thread
From: D. R. @ 2011-07-14  7:59 UTC (permalink / raw)
  To: Adrian C.
  Cc: Christoph Pinkl, linux-media, abraham.manu, tuxoholic,
	marko.ristola

Hi,

Does this patch works also for kernel 2.6.38 ?


Kind regards
David

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2011-07-14  7:59 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-03 22:42 Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver) Adrian C.
2011-05-06 17:37 ` Marko Ristola
2011-05-10 21:30   ` Adrian C.
2011-05-11 12:32     ` AW: " Christoph Pinkl
2011-05-13 14:23     ` Christoph Pinkl
2011-05-21  1:15       ` Adrian C.
2011-05-21  7:04         ` Adrian C.
2011-05-21  7:23         ` Adrian C.
2011-05-21 16:19           ` Marko Ristola
2011-05-22 18:20             ` AW: " Christoph Pinkl
2011-05-23  0:02               ` Adrian C.
2011-07-14  7:59                 ` D. R.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox