From: "Toralf Förster" <toralf.foerster@gmx.de>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org
Subject: set default protocol for TerraTec Cinergy XXS to "nec"
Date: Mon, 16 Jul 2012 22:22:44 +0200 [thread overview]
Message-ID: <50047814.20701@gmx.de> (raw)
For a TerraTec Cinergy XXS USB stick (Bus 001 Device 008: ID 0ccd:00ab TerraTec Electronic GmbH )
I've to switch the protocol every time after plugin to get (at least few) keys working :
$> sudo ir-keytable --protocol=nec --sysdev=`ir-keytable 2>&1 | head -n 1 | cut -f5 -d'/'`
/me wonders whether "nec" should be set as the default for this key in kernel or not
>From the syslog :
2012-07-16T22:12:53.357+02:00 n22 kernel: usb 1-1: new high-speed USB device number 7 using ehci_hcd
2012-07-16T22:12:53.460+02:00 n22 kernel: ehci_hcd 0000:00:1a.7: dma_pool_free ehci_qh, f60cd4e0/fffff4e0 (bad dma)
2012-07-16T22:12:53.471+02:00 n22 kernel: usb 1-1: New USB device found, idVendor=0ccd, idProduct=00ab
2012-07-16T22:12:53.471+02:00 n22 kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
2012-07-16T22:12:53.471+02:00 n22 kernel: usb 1-1: Product: Cinergy T XXS
2012-07-16T22:12:53.471+02:00 n22 kernel: usb 1-1: Manufacturer: TerraTec GmbH
2012-07-16T22:12:53.471+02:00 n22 kernel: usb 1-1: SerialNumber: 0000000001
2012-07-16T22:12:53.639+02:00 n22 kernel: dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
2012-07-16T22:12:53.650+02:00 n22 kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
2012-07-16T22:12:53.854+02:00 n22 kernel: dib0700: firmware started successfully.
2012-07-16T22:12:54.355+02:00 n22 kernel: dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
2012-07-16T22:12:54.355+02:00 n22 kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
2012-07-16T22:12:54.355+02:00 n22 kernel: DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
2012-07-16T22:12:54.560+02:00 n22 kernel: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
2012-07-16T22:12:54.763+02:00 n22 kernel: DiB0070: successfully identified
2012-07-16T22:12:54.801+02:00 n22 kernel: Registered IR keymap rc-dib0700-rc5
2012-07-16T22:12:54.801+02:00 n22 kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/rc/rc0/input15
2012-07-16T22:12:54.801+02:00 n22 kernel: rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/rc/rc0
2012-07-16T22:12:54.801+02:00 n22 kernel: dvb-usb: schedule remote query interval to 50 msecs.
2012-07-16T22:12:54.801+02:00 n22 kernel: dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
2012-07-16T22:12:54.801+02:00 n22 kernel: usbcore: registered new interface driver dvb_usb_dib0700
2012-07-16T22:12:55.000+02:00 n22 sudo: tfoerste : TTY=pts/2 ; PWD=/home/tfoerste/tmp ; USER=root ; COMMAND=/usr/bin/ir-keytable --protocol=nec --sysdev=rc0
--
MfG/Sincerely
Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
next reply other threads:[~2012-07-16 20:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-16 20:22 Toralf Förster [this message]
2012-07-30 16:13 ` set default protocol for TerraTec Cinergy XXS to "nec" Mauro Carvalho Chehab
2012-07-31 18:03 ` Toralf Förster
2012-08-01 14:20 ` Toralf Förster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50047814.20701@gmx.de \
--to=toralf.foerster@gmx.de \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).