* [PATCH] cx25840: Declare MODULE_FIRMWARE usage
@ 2012-07-26 16:44 Tim Gardner
2012-07-26 21:59 ` Andy Walls
0 siblings, 1 reply; 5+ messages in thread
From: Tim Gardner @ 2012-07-26 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Tim Gardner, Mauro Carvalho Chehab, linux-media
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
---
drivers/media/video/cx25840/cx25840-firmware.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index 8150200..b3169f9 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client)
cx25840_write(client, 0x803, 0x03);
}
+#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
+#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
+#define CX25840_FIRMWARE "v4l-cx25840.fw"
+
static const char *get_fw_name(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
@@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client)
if (firmware[0])
return firmware;
if (is_cx2388x(state))
- return "v4l-cx23885-avcore-01.fw";
+ return CX2388x_FIRMWARE;
if (is_cx231xx(state))
- return "v4l-cx231xx-avcore-01.fw";
- return "v4l-cx25840.fw";
+ return CX231xx_FIRMWARE;
+ return CX25840_FIRMWARE;
}
static int check_fw_load(struct i2c_client *client, int size)
@@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client)
return check_fw_load(client, size);
}
+
+MODULE_FIRMWARE(CX2388x_FIRMWARE);
+MODULE_FIRMWARE(CX231xx_FIRMWARE);
+MODULE_FIRMWARE(CX25840_FIRMWARE);
+
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] cx25840: Declare MODULE_FIRMWARE usage
2012-07-26 16:44 [PATCH] cx25840: Declare MODULE_FIRMWARE usage Tim Gardner
@ 2012-07-26 21:59 ` Andy Walls
2012-07-27 12:06 ` Tim Gardner
0 siblings, 1 reply; 5+ messages in thread
From: Andy Walls @ 2012-07-26 21:59 UTC (permalink / raw)
To: Tim Gardner; +Cc: linux-kernel, Mauro Carvalho Chehab, linux-media
On Thu, 2012-07-26 at 10:44 -0600, Tim Gardner wrote:
> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
> Cc: linux-media@vger.kernel.org
> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
> ---
> drivers/media/video/cx25840/cx25840-firmware.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
> index 8150200..b3169f9 100644
> --- a/drivers/media/video/cx25840/cx25840-firmware.c
> +++ b/drivers/media/video/cx25840/cx25840-firmware.c
> @@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client)
> cx25840_write(client, 0x803, 0x03);
> }
>
> +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
> +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
> +#define CX25840_FIRMWARE "v4l-cx25840.fw"
> +
> static const char *get_fw_name(struct i2c_client *client)
> {
> struct cx25840_state *state = to_state(i2c_get_clientdata(client));
> @@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client)
> if (firmware[0])
> return firmware;
> if (is_cx2388x(state))
> - return "v4l-cx23885-avcore-01.fw";
> + return CX2388x_FIRMWARE;
> if (is_cx231xx(state))
> - return "v4l-cx231xx-avcore-01.fw";
> - return "v4l-cx25840.fw";
> + return CX231xx_FIRMWARE;
> + return CX25840_FIRMWARE;
> }
>
> static int check_fw_load(struct i2c_client *client, int size)
> @@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client)
>
> return check_fw_load(client, size);
> }
> +
> +MODULE_FIRMWARE(CX2388x_FIRMWARE);
> +MODULE_FIRMWARE(CX231xx_FIRMWARE);
> +MODULE_FIRMWARE(CX25840_FIRMWARE);
> +
How will the firmware attribute in the .module_info section be used?
For any one model of TV capture device, the cx25840 only needs one of
the above firmware files. The others need not exist.
I would not want anything in user or kernel space to refuse to load the
module just because all 3 firmware files are not present.
Regards,
Andy
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] cx25840: Declare MODULE_FIRMWARE usage
2012-07-26 21:59 ` Andy Walls
@ 2012-07-27 12:06 ` Tim Gardner
2012-07-28 16:52 ` Andy Walls
0 siblings, 1 reply; 5+ messages in thread
From: Tim Gardner @ 2012-07-27 12:06 UTC (permalink / raw)
To: Andy Walls; +Cc: linux-kernel, Mauro Carvalho Chehab, linux-media
On 07/26/2012 03:59 PM, Andy Walls wrote:
> On Thu, 2012-07-26 at 10:44 -0600, Tim Gardner wrote:
>> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
>> Cc: linux-media@vger.kernel.org
>> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
>> ---
>> drivers/media/video/cx25840/cx25840-firmware.c | 15 ++++++++++++---
>> 1 file changed, 12 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
>> index 8150200..b3169f9 100644
>> --- a/drivers/media/video/cx25840/cx25840-firmware.c
>> +++ b/drivers/media/video/cx25840/cx25840-firmware.c
>> @@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client)
>> cx25840_write(client, 0x803, 0x03);
>> }
>>
>> +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
>> +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
>> +#define CX25840_FIRMWARE "v4l-cx25840.fw"
>> +
>> static const char *get_fw_name(struct i2c_client *client)
>> {
>> struct cx25840_state *state = to_state(i2c_get_clientdata(client));
>> @@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client)
>> if (firmware[0])
>> return firmware;
>> if (is_cx2388x(state))
>> - return "v4l-cx23885-avcore-01.fw";
>> + return CX2388x_FIRMWARE;
>> if (is_cx231xx(state))
>> - return "v4l-cx231xx-avcore-01.fw";
>> - return "v4l-cx25840.fw";
>> + return CX231xx_FIRMWARE;
>> + return CX25840_FIRMWARE;
>> }
>>
>> static int check_fw_load(struct i2c_client *client, int size)
>> @@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client)
>>
>> return check_fw_load(client, size);
>> }
>> +
>> +MODULE_FIRMWARE(CX2388x_FIRMWARE);
>> +MODULE_FIRMWARE(CX231xx_FIRMWARE);
>> +MODULE_FIRMWARE(CX25840_FIRMWARE);
>> +
>
> How will the firmware attribute in the .module_info section be used?
>
> For any one model of TV capture device, the cx25840 only needs one of
> the above firmware files. The others need not exist.
>
> I would not want anything in user or kernel space to refuse to load the
> module just because all 3 firmware files are not present.
>
> Regards,
> Andy
>
The MODULE_FIRMWARE macro is purely informational. Declaring the
firmware files that the driver _might_ use helps me pare down the
external firmware package to just those files that I know it must have.
This patch will have no runtime impact.
Note that there are plenty of uses of the MODULE_FIRMWARE macro within
the kernel.
rtg
--
Tim Gardner tim.gardner@canonical.com
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] cx25840: Declare MODULE_FIRMWARE usage
2012-07-27 12:06 ` Tim Gardner
@ 2012-07-28 16:52 ` Andy Walls
2012-07-30 12:47 ` Tim Gardner
0 siblings, 1 reply; 5+ messages in thread
From: Andy Walls @ 2012-07-28 16:52 UTC (permalink / raw)
To: Tim Gardner; +Cc: linux-kernel, Mauro Carvalho Chehab, linux-media
On Fri, 2012-07-27 at 06:06 -0600, Tim Gardner wrote:
> On 07/26/2012 03:59 PM, Andy Walls wrote:
> > On Thu, 2012-07-26 at 10:44 -0600, Tim Gardner wrote:
> >> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
> >> Cc: linux-media@vger.kernel.org
> >> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
> >> ---
> >> drivers/media/video/cx25840/cx25840-firmware.c | 15 ++++++++++++---
> >> 1 file changed, 12 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
> >> index 8150200..b3169f9 100644
> >> --- a/drivers/media/video/cx25840/cx25840-firmware.c
> >> +++ b/drivers/media/video/cx25840/cx25840-firmware.c
> >> @@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client)
> >> cx25840_write(client, 0x803, 0x03);
> >> }
> >>
> >> +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
> >> +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
> >> +#define CX25840_FIRMWARE "v4l-cx25840.fw"
> >> +
> >> static const char *get_fw_name(struct i2c_client *client)
> >> {
> >> struct cx25840_state *state = to_state(i2c_get_clientdata(client));
> >> @@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client)
> >> if (firmware[0])
> >> return firmware;
> >> if (is_cx2388x(state))
> >> - return "v4l-cx23885-avcore-01.fw";
> >> + return CX2388x_FIRMWARE;
> >> if (is_cx231xx(state))
> >> - return "v4l-cx231xx-avcore-01.fw";
> >> - return "v4l-cx25840.fw";
> >> + return CX231xx_FIRMWARE;
> >> + return CX25840_FIRMWARE;
> >> }
> >>
> >> static int check_fw_load(struct i2c_client *client, int size)
> >> @@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client)
> >>
> >> return check_fw_load(client, size);
> >> }
> >> +
> >> +MODULE_FIRMWARE(CX2388x_FIRMWARE);
> >> +MODULE_FIRMWARE(CX231xx_FIRMWARE);
> >> +MODULE_FIRMWARE(CX25840_FIRMWARE);
> >> +
> >
> > How will the firmware attribute in the .module_info section be used?
> >
> > For any one model of TV capture device, the cx25840 only needs one of
> > the above firmware files. The others need not exist.
> >
> > I would not want anything in user or kernel space to refuse to load the
> > module just because all 3 firmware files are not present.
> >
> > Regards,
> > Andy
> >
>
> The MODULE_FIRMWARE macro is purely informational. Declaring the
> firmware files that the driver _might_ use helps me pare down the
> external firmware package to just those files that I know it must have.
Would it help if the MODULE_FIRMWARE text was more descriptive, e.g.:
MODULE_FIRMWARE(CX25840_FIRMWARE " CX25840/1/2/3 chips only");
MODULE_FIRMWARE(CX231xx_FIRMWARE " CX23100/1/2 chips only");
MODULE_FIRMWARE(CX2388x_FIRMWARE " CX23885/7/8 chips only");
Similarly for ivtv:
MODULE_FIRMWARE(CX2341X_FIRM_ENC_FILENAME);
MODULE_FIRMWARE(CX2341X_FIRM_DEC_FILENAME " PVR-350 only");
MODULE_FIRMWARE(IVTV_DECODE_INIT_MPEG_FILENAME " PVR-350 only");
and cx18:
MODULE_FIRMWARE(FWFILE); /* v4l-cx23418-dig.fw */
MODULE_FIRMWARE(CX18_CPU_FIRMWARE);
MODULE_FIRMWARE(CX18_APU_FIRMWARE);
MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE " Non-HVR-1600 cards");
MODULE_FIRMWARE(FWFILE " Yuan MPC-718 only");
or would that confuse some userspace tools?
>
> This patch will have no runtime impact.
OK. For the original patch:
Acked-by: Andy Walls <awalls@md.metrocast.net>
Regards,
Andy
> Note that there are plenty of uses of the MODULE_FIRMWARE macro within
> the kernel.
>
> rtg
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] cx25840: Declare MODULE_FIRMWARE usage
2012-07-28 16:52 ` Andy Walls
@ 2012-07-30 12:47 ` Tim Gardner
0 siblings, 0 replies; 5+ messages in thread
From: Tim Gardner @ 2012-07-30 12:47 UTC (permalink / raw)
To: Andy Walls; +Cc: linux-kernel, Mauro Carvalho Chehab, linux-media
On 07/28/2012 10:52 AM, Andy Walls wrote:
> On Fri, 2012-07-27 at 06:06 -0600, Tim Gardner wrote:
>> On 07/26/2012 03:59 PM, Andy Walls wrote:
>>> On Thu, 2012-07-26 at 10:44 -0600, Tim Gardner wrote:
>>>> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
>>>> Cc: linux-media@vger.kernel.org
>>>> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
>>>> ---
>>>> drivers/media/video/cx25840/cx25840-firmware.c | 15 ++++++++++++---
>>>> 1 file changed, 12 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
>>>> index 8150200..b3169f9 100644
>>>> --- a/drivers/media/video/cx25840/cx25840-firmware.c
>>>> +++ b/drivers/media/video/cx25840/cx25840-firmware.c
>>>> @@ -61,6 +61,10 @@ static void end_fw_load(struct i2c_client *client)
>>>> cx25840_write(client, 0x803, 0x03);
>>>> }
>>>>
>>>> +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
>>>> +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
>>>> +#define CX25840_FIRMWARE "v4l-cx25840.fw"
>>>> +
>>>> static const char *get_fw_name(struct i2c_client *client)
>>>> {
>>>> struct cx25840_state *state = to_state(i2c_get_clientdata(client));
>>>> @@ -68,10 +72,10 @@ static const char *get_fw_name(struct i2c_client *client)
>>>> if (firmware[0])
>>>> return firmware;
>>>> if (is_cx2388x(state))
>>>> - return "v4l-cx23885-avcore-01.fw";
>>>> + return CX2388x_FIRMWARE;
>>>> if (is_cx231xx(state))
>>>> - return "v4l-cx231xx-avcore-01.fw";
>>>> - return "v4l-cx25840.fw";
>>>> + return CX231xx_FIRMWARE;
>>>> + return CX25840_FIRMWARE;
>>>> }
>>>>
>>>> static int check_fw_load(struct i2c_client *client, int size)
>>>> @@ -164,3 +168,8 @@ int cx25840_loadfw(struct i2c_client *client)
>>>>
>>>> return check_fw_load(client, size);
>>>> }
>>>> +
>>>> +MODULE_FIRMWARE(CX2388x_FIRMWARE);
>>>> +MODULE_FIRMWARE(CX231xx_FIRMWARE);
>>>> +MODULE_FIRMWARE(CX25840_FIRMWARE);
>>>> +
>>>
>>> How will the firmware attribute in the .module_info section be used?
>>>
>>> For any one model of TV capture device, the cx25840 only needs one of
>>> the above firmware files. The others need not exist.
>>>
>>> I would not want anything in user or kernel space to refuse to load the
>>> module just because all 3 firmware files are not present.
>>>
>>> Regards,
>>> Andy
>>>
>>
>> The MODULE_FIRMWARE macro is purely informational. Declaring the
>> firmware files that the driver _might_ use helps me pare down the
>> external firmware package to just those files that I know it must have.
>
> Would it help if the MODULE_FIRMWARE text was more descriptive, e.g.:
>
> MODULE_FIRMWARE(CX25840_FIRMWARE " CX25840/1/2/3 chips only");
> MODULE_FIRMWARE(CX231xx_FIRMWARE " CX23100/1/2 chips only");
> MODULE_FIRMWARE(CX2388x_FIRMWARE " CX23885/7/8 chips only");
>
> Similarly for ivtv:
>
> MODULE_FIRMWARE(CX2341X_FIRM_ENC_FILENAME);
> MODULE_FIRMWARE(CX2341X_FIRM_DEC_FILENAME " PVR-350 only");
> MODULE_FIRMWARE(IVTV_DECODE_INIT_MPEG_FILENAME " PVR-350 only");
>
> and cx18:
>
> MODULE_FIRMWARE(FWFILE); /* v4l-cx23418-dig.fw */
> MODULE_FIRMWARE(CX18_CPU_FIRMWARE);
> MODULE_FIRMWARE(CX18_APU_FIRMWARE);
> MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE " Non-HVR-1600 cards");
> MODULE_FIRMWARE(FWFILE " Yuan MPC-718 only");
>
> or would that confuse some userspace tools?
>
Yeah, I think it would confuse any tools that assume the firmware string
emitted by modinfo is a literal filename.
rtg
--
Tim Gardner tim.gardner@canonical.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-07-30 12:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-26 16:44 [PATCH] cx25840: Declare MODULE_FIRMWARE usage Tim Gardner
2012-07-26 21:59 ` Andy Walls
2012-07-27 12:06 ` Tim Gardner
2012-07-28 16:52 ` Andy Walls
2012-07-30 12:47 ` Tim Gardner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).