Re: boot slow down

[James <bjlockie@lockie.ca>]

On 08/04/12 13:42, Andy Walls wrote:
> James <bjlockie@lockie.ca> wrote:
> 
>> There's a big pause before the 'unable'
>>
>> [    2.243856] usb 4-1: Manufacturer: Logitech
>> [   62.739097] cx25840 6-0044: unable to open firmware
>> v4l-cx23885-avcore-01.fw
>>
>>
>> I have a cx23885
>> cx23885[0]: registered device video0 [v4l2]
>>
>> Is there any way to stop it from trying to load the firmware?
>> What is the firmware for, analog tv? Digital works fine and analog is
>> useless to me.
>> I assume it is timing out there.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media"
>> in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> The firmware is for the analog broadcast audio standard (e.g. BTSC) detection microcontroller.
> 
> The A/V core of the CX23885/7/8 chips is for analog vidoe and audio processing (broadcast, CVBS, SVideo, audio L/R in).
> 
> The A/V core of the CX23885 provides the IR unit and the Video PLL provides the timing for the IR unit.
> 
> The A/V core of the CX23888 provides the Video PLL which is the timing for the IR unit in the CX23888.
> 
> Just grab the firmware and be done with it.  Don't waste time with trying to make the cx23885 working properly but halfway.
> 
> Regards,
> Andy
> 
I will do that.
It has been available since 2011 but there was no slowdown before.