From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@wilsonet.com>,
linux-media@vger.kernel.org, lirc-list@lists.sourceforge.net
Subject: Re: [PATCH] [media] iguanair: various fixes
Date: Sat, 11 Aug 2012 21:35:29 -0300 [thread overview]
Message-ID: <5026FA51.9080600@redhat.com> (raw)
In-Reply-To: <1343731061-9901-1-git-send-email-sean@mess.org>
Em 31-07-2012 07:37, Sean Young escreveu:
> This fixes:
> - rx_overflow while holding down any down button on a nec remote
> - suspend/resume
> - stop receiver on rmmod
> - advertise rx_resolution and timeout properly
> - code simplify
> - ignore unsupported firmware versions
Please don't mix several different things on the same patch; it makes
harder for review and, if any of these changes break, a git revert would
change a lot of unrelated things. It also makes hard for bug disect.
Tip: "git citool" helps a lot to break messy patches into smaller, concise
ones.
Thanks!
Mauro
>
> Signed-off-by: Sean Young <sean@mess.org>
> ---
> drivers/media/rc/Kconfig | 8 +-
> drivers/media/rc/iguanair.c | 206 ++++++++++++++++++++++----------------------
> 2 files changed, 107 insertions(+), 107 deletions(-)
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 5180390..fa1745c 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -264,8 +264,12 @@ config IR_IGUANA
> depends on RC_CORE
> select USB
> ---help---
> - Say Y here if you want to use the IgaunaWorks USB IR Transceiver.
> - Both infrared receive and send are supported.
> + Say Y here if you want to use the IguanaWorks USB IR Transceiver.
> + Both infrared receive and send are supported. If you want to
> + change the ID or the pin config, use the user space driver from
> + IguanaWorks.
> +
> + Only firmware 0x0205 and later is supported.
>
> To compile this driver as a module, choose M here: the module will
> be called iguanair.
> diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c
> index 5e2eaf8..aa7f34f 100644
> --- a/drivers/media/rc/iguanair.c
> +++ b/drivers/media/rc/iguanair.c
> @@ -35,9 +35,9 @@ struct iguanair {
> struct device *dev;
> struct usb_device *udev;
>
> - int pipe_in, pipe_out;
> + int pipe_out;
> + uint16_t version;
> uint8_t bufsize;
> - uint8_t version[2];
>
> struct mutex lock;
>
> @@ -61,20 +61,21 @@ struct iguanair {
> };
>
> #define CMD_GET_VERSION 0x01
> -#define CMD_GET_BUFSIZE 0x11
> #define CMD_GET_FEATURES 0x10
> +#define CMD_GET_BUFSIZE 0x11
> +#define CMD_RECEIVER_ON 0x12
> +#define CMD_RECEIVER_OFF 0x14
> #define CMD_SEND 0x15
> -#define CMD_EXECUTE 0x1f
> +#define CMD_GET_ID 0x1f
> #define CMD_RX_OVERFLOW 0x31
> #define CMD_TX_OVERFLOW 0x32
> -#define CMD_RECEIVER_ON 0x12
> -#define CMD_RECEIVER_OFF 0x14
>
> #define DIR_IN 0xdc
> #define DIR_OUT 0xcd
>
> #define MAX_PACKET_SIZE 8u
> #define TIMEOUT 1000
> +#define RX_RESOLUTION 21330
>
> struct packet {
> uint16_t start;
> @@ -82,11 +83,6 @@ struct packet {
> uint8_t cmd;
> };
>
> -struct response_packet {
> - struct packet header;
> - uint8_t data[4];
> -};
> -
> struct send_packet {
> struct packet header;
> uint8_t length;
> @@ -96,10 +92,46 @@ struct send_packet {
> uint8_t payload[0];
> };
>
> +/*
> + * The hardware advertises a polling interval of 10ms. This is far too
> + * slow and will cause regular rx overflows.
> + */
> +static int int_urb_interval(struct usb_device *udev)
> +{
> + switch (udev->speed) {
> + case USB_SPEED_HIGH:
> + return 4;
> + case USB_SPEED_LOW:
> + return 1;
> + case USB_SPEED_FULL:
> + default:
> + return 1;
> + }
> +}
> +
> static void process_ir_data(struct iguanair *ir, unsigned len)
> {
> if (len >= 4 && ir->buf_in[0] == 0 && ir->buf_in[1] == 0) {
> switch (ir->buf_in[3]) {
> + case CMD_GET_VERSION:
> + if (len == 6) {
> + ir->version = (ir->buf_in[5] << 8) |
> + ir->buf_in[4];
> + complete(&ir->completion);
> + }
> + break;
> + case CMD_GET_BUFSIZE:
> + if (len >= 5) {
> + ir->bufsize = ir->buf_in[4];
> + complete(&ir->completion);
> + }
> + break;
> + case CMD_GET_FEATURES:
> + if (len > 5) {
> + ir->cycle_overhead = ir->buf_in[5];
> + complete(&ir->completion);
> + }
> + break;
> case CMD_TX_OVERFLOW:
> ir->tx_overflow = true;
> case CMD_RECEIVER_OFF:
> @@ -109,6 +141,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len)
> break;
> case CMD_RX_OVERFLOW:
> dev_warn(ir->dev, "receive overflow\n");
> + ir_raw_event_reset(ir->rc);
> break;
> default:
> dev_warn(ir->dev, "control code %02x received\n",
> @@ -128,7 +161,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len)
> } else {
> rawir.pulse = (ir->buf_in[i] & 0x80) == 0;
> rawir.duration = ((ir->buf_in[i] & 0x7f) + 1) *
> - 21330;
> + RX_RESOLUTION;
> }
>
> ir_raw_event_store_with_filter(ir->rc, &rawir);
> @@ -141,6 +174,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len)
> static void iguanair_rx(struct urb *urb)
> {
> struct iguanair *ir;
> + int rc;
>
> if (!urb)
> return;
> @@ -166,34 +200,27 @@ static void iguanair_rx(struct urb *urb)
> break;
> }
>
> - usb_submit_urb(urb, GFP_ATOMIC);
> + rc = usb_submit_urb(urb, GFP_ATOMIC);
> + if (rc && rc != -ENODEV)
> + dev_warn(ir->dev, "failed to resubmit urb: %d\n", rc);
> }
>
> -static int iguanair_send(struct iguanair *ir, void *data, unsigned size,
> - struct response_packet *response, unsigned *res_len)
> +static int iguanair_send(struct iguanair *ir, void *data, unsigned size)
> {
> - unsigned offset, len;
> int rc, transferred;
>
> - for (offset = 0; offset < size; offset += MAX_PACKET_SIZE) {
> - len = min(size - offset, MAX_PACKET_SIZE);
> + INIT_COMPLETION(ir->completion);
>
> - if (ir->tx_overflow)
> - return -EOVERFLOW;
> + rc = usb_interrupt_msg(ir->udev, ir->pipe_out, data, size,
> + &transferred, TIMEOUT);
> + if (rc)
> + return rc;
>
> - rc = usb_interrupt_msg(ir->udev, ir->pipe_out, data + offset,
> - len, &transferred, TIMEOUT);
> - if (rc)
> - return rc;
> + if (transferred != size)
> + return -EIO;
>
> - if (transferred != len)
> - return -EIO;
> - }
> -
> - if (response) {
> - rc = usb_interrupt_msg(ir->udev, ir->pipe_in, response,
> - sizeof(*response), res_len, TIMEOUT);
> - }
> + if (wait_for_completion_timeout(&ir->completion, TIMEOUT) == 0)
> + return -ETIMEDOUT;
>
> return rc;
> }
> @@ -201,66 +228,43 @@ static int iguanair_send(struct iguanair *ir, void *data, unsigned size,
> static int iguanair_get_features(struct iguanair *ir)
> {
> struct packet packet;
> - struct response_packet response;
> - int rc, len;
> + int rc;
>
> packet.start = 0;
> packet.direction = DIR_OUT;
> packet.cmd = CMD_GET_VERSION;
>
> - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len);
> + rc = iguanair_send(ir, &packet, sizeof(packet));
> if (rc) {
> dev_info(ir->dev, "failed to get version\n");
> goto out;
> }
>
> - if (len != 6) {
> - dev_info(ir->dev, "failed to get version\n");
> - rc = -EIO;
> + if (ir->version < 0x205) {
> + dev_err(ir->dev, "firmware 0x%04x is too old\n", ir->version);
> + rc = -ENODEV;
> goto out;
> }
>
> - ir->version[0] = response.data[0];
> - ir->version[1] = response.data[1];
> ir->bufsize = 150;
> ir->cycle_overhead = 65;
>
> packet.cmd = CMD_GET_BUFSIZE;
>
> - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len);
> + rc = iguanair_send(ir, &packet, sizeof(packet));
> if (rc) {
> dev_info(ir->dev, "failed to get buffer size\n");
> goto out;
> }
>
> - if (len != 5) {
> - dev_info(ir->dev, "failed to get buffer size\n");
> - rc = -EIO;
> - goto out;
> - }
> -
> - ir->bufsize = response.data[0];
> -
> - if (ir->version[0] == 0 || ir->version[1] == 0)
> - goto out;
> -
> packet.cmd = CMD_GET_FEATURES;
>
> - rc = iguanair_send(ir, &packet, sizeof(packet), &response, &len);
> + rc = iguanair_send(ir, &packet, sizeof(packet));
> if (rc) {
> dev_info(ir->dev, "failed to get features\n");
> goto out;
> }
>
> - if (len < 5) {
> - dev_info(ir->dev, "failed to get features\n");
> - rc = -EIO;
> - goto out;
> - }
> -
> - if (len > 5 && ir->version[0] >= 4)
> - ir->cycle_overhead = response.data[1];
> -
> out:
> return rc;
> }
> @@ -269,17 +273,11 @@ static int iguanair_receiver(struct iguanair *ir, bool enable)
> {
> struct packet packet = { 0, DIR_OUT, enable ?
> CMD_RECEIVER_ON : CMD_RECEIVER_OFF };
> - int rc;
> -
> - INIT_COMPLETION(ir->completion);
> -
> - rc = iguanair_send(ir, &packet, sizeof(packet), NULL, NULL);
> - if (rc)
> - return rc;
>
> - wait_for_completion_timeout(&ir->completion, TIMEOUT);
> + if (enable)
> + ir_raw_event_reset(ir->rc);
>
> - return 0;
> + return iguanair_send(ir, &packet, sizeof(packet));
> }
>
> /*
> @@ -406,17 +404,10 @@ static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count)
>
> ir->tx_overflow = false;
>
> - INIT_COMPLETION(ir->completion);
> -
> - rc = iguanair_send(ir, packet, size + 8, NULL, NULL);
> + rc = iguanair_send(ir, packet, size + 8);
>
> - if (rc == 0) {
> - wait_for_completion_timeout(&ir->completion, TIMEOUT);
> - if (ir->tx_overflow)
> - rc = -EOVERFLOW;
> - }
> -
> - ir->tx_overflow = false;
> + if (rc == 0 && ir->tx_overflow)
> + rc = -EOVERFLOW;
>
> if (ir->receiver_on) {
> if (iguanair_receiver(ir, true))
> @@ -437,8 +428,6 @@ static int iguanair_open(struct rc_dev *rdev)
>
> mutex_lock(&ir->lock);
>
> - usb_submit_urb(ir->urb_in, GFP_KERNEL);
> -
> BUG_ON(ir->receiver_on);
>
> rc = iguanair_receiver(ir, true);
> @@ -459,11 +448,9 @@ static void iguanair_close(struct rc_dev *rdev)
>
> rc = iguanair_receiver(ir, false);
> ir->receiver_on = false;
> - if (rc)
> + if (rc && rc != -ENODEV)
> dev_warn(ir->dev, "failed to disable receiver: %d\n", rc);
>
> - usb_kill_urb(ir->urb_in);
> -
> mutex_unlock(&ir->lock);
> }
>
> @@ -473,7 +460,7 @@ static int __devinit iguanair_probe(struct usb_interface *intf,
> struct usb_device *udev = interface_to_usbdev(intf);
> struct iguanair *ir;
> struct rc_dev *rc;
> - int ret;
> + int ret, pipein;
> struct usb_host_interface *idesc;
>
> ir = kzalloc(sizeof(*ir), GFP_KERNEL);
> @@ -502,28 +489,29 @@ static int __devinit iguanair_probe(struct usb_interface *intf,
> ir->rc = rc;
> ir->dev = &intf->dev;
> ir->udev = udev;
> - ir->pipe_in = usb_rcvintpipe(udev,
> - idesc->endpoint[0].desc.bEndpointAddress);
> ir->pipe_out = usb_sndintpipe(udev,
> idesc->endpoint[1].desc.bEndpointAddress);
> mutex_init(&ir->lock);
> init_completion(&ir->completion);
>
> - ret = iguanair_get_features(ir);
> + pipein = usb_rcvintpipe(udev, idesc->endpoint[0].desc.bEndpointAddress);
> + usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in,
> + MAX_PACKET_SIZE, iguanair_rx, ir, int_urb_interval(udev));
> + ir->urb_in->transfer_dma = ir->dma_in;
> + ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> +
> + ret = usb_submit_urb(ir->urb_in, GFP_KERNEL);
> if (ret) {
> - dev_warn(&intf->dev, "failed to get device features");
> + dev_warn(&intf->dev, "failed to submit urb: %d\n", ret);
> goto out;
> }
>
> - usb_fill_int_urb(ir->urb_in, ir->udev, ir->pipe_in, ir->buf_in,
> - MAX_PACKET_SIZE, iguanair_rx, ir,
> - idesc->endpoint[0].desc.bInterval);
> - ir->urb_in->transfer_dma = ir->dma_in;
> - ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> + ret = iguanair_get_features(ir);
> + if (ret)
> + goto out2;
>
> snprintf(ir->name, sizeof(ir->name),
> - "IguanaWorks USB IR Transceiver version %d.%d",
> - ir->version[0], ir->version[1]);
> + "IguanaWorks USB IR Transceiver version 0x%04x", ir->version);
>
> usb_make_path(ir->udev, ir->phys, sizeof(ir->phys));
>
> @@ -540,21 +528,23 @@ static int __devinit iguanair_probe(struct usb_interface *intf,
> rc->s_tx_carrier = iguanair_set_tx_carrier;
> rc->tx_ir = iguanair_tx;
> rc->driver_name = DRIVER_NAME;
> - rc->map_name = RC_MAP_EMPTY;
> + rc->map_name = RC_MAP_RC6_MCE;
> + rc->timeout = MS_TO_NS(100);
> + rc->rx_resolution = RX_RESOLUTION;
>
> iguanair_set_tx_carrier(rc, 38000);
>
> ret = rc_register_device(rc);
> if (ret < 0) {
> dev_err(&intf->dev, "failed to register rc device %d", ret);
> - goto out;
> + goto out2;
> }
>
> usb_set_intfdata(intf, ir);
>
> - dev_info(&intf->dev, "Registered %s", ir->name);
> -
> return 0;
> +out2:
> + usb_kill_urb(ir->urb_in);
> out:
> if (ir) {
> usb_free_urb(ir->urb_in);
> @@ -570,12 +560,11 @@ static void __devexit iguanair_disconnect(struct usb_interface *intf)
> {
> struct iguanair *ir = usb_get_intfdata(intf);
>
> + rc_unregister_device(ir->rc);
> usb_set_intfdata(intf, NULL);
> -
> usb_kill_urb(ir->urb_in);
> usb_free_urb(ir->urb_in);
> usb_free_coherent(ir->udev, MAX_PACKET_SIZE, ir->buf_in, ir->dma_in);
> - rc_unregister_device(ir->rc);
> kfree(ir);
> }
>
> @@ -592,6 +581,8 @@ static int iguanair_suspend(struct usb_interface *intf, pm_message_t message)
> dev_warn(ir->dev, "failed to disable receiver for suspend\n");
> }
>
> + usb_kill_urb(ir->urb_in);
> +
> mutex_unlock(&ir->lock);
>
> return rc;
> @@ -604,6 +595,10 @@ static int iguanair_resume(struct usb_interface *intf)
>
> mutex_lock(&ir->lock);
>
> + rc = usb_submit_urb(ir->urb_in, GFP_KERNEL);
> + if (rc)
> + dev_warn(&intf->dev, "failed to submit urb: %d\n", rc);
> +
> if (ir->receiver_on) {
> rc = iguanair_receiver(ir, true);
> if (rc)
> @@ -627,7 +622,8 @@ static struct usb_driver iguanair_driver = {
> .suspend = iguanair_suspend,
> .resume = iguanair_resume,
> .reset_resume = iguanair_resume,
> - .id_table = iguanair_table
> + .id_table = iguanair_table,
> + .soft_unbind = 1 /* we want to disable receiver on unbind */
> };
>
> module_usb_driver(iguanair_driver);
>
next prev parent reply other threads:[~2012-08-12 0:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-31 10:37 [PATCH] [media] iguanair: various fixes Sean Young
2012-08-12 0:35 ` Mauro Carvalho Chehab [this message]
2012-08-12 18:32 ` Sean Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5026FA51.9080600@redhat.com \
--to=mchehab@redhat.com \
--cc=jarod@wilsonet.com \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).