From: Antti Palosaari <crope@iki.fi>
To: CrazyCat <crazycat69@yandex.ru>
Cc: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: Re: [PATCH] dvb_frontend: Multistream support
Date: Thu, 16 Aug 2012 21:11:27 +0300 [thread overview]
Message-ID: <502D37CF.7030608@iki.fi> (raw)
In-Reply-To: <53381345139167@web11e.yandex.ru>
On 08/16/2012 08:46 PM, CrazyCat wrote:
> DTV_ISDBS_TS_ID replaced with DTV_STREAM_ID.
> Aliases DTV_ISDBS_TS_ID, DTV_DVBS2_MIS_ID for DTV_STREAM_ID.
> DTV_DVBT2_PLP_ID marked as legacy.
>
> Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
> diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
> index f50d405..3444dda 100644
> --- a/include/linux/dvb/frontend.h
> +++ b/include/linux/dvb/frontend.h
> @@ -62,6 +62,7 @@ typedef enum fe_caps {
> FE_CAN_8VSB = 0x200000,
> FE_CAN_16VSB = 0x400000,
> FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
> + FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports DVB-S2 multistream filtering */
> FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */
> FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
> FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
> @@ -314,9 +315,11 @@ struct dvb_frontend_event {
>
> #define DTV_ISDBT_LAYER_ENABLED 41
>
> -#define DTV_ISDBS_TS_ID 42
> +#define DTV_STREAM_ID 42
> +#define DTV_ISDBS_TS_ID DTV_STREAM_ID
> +#define DTV_DVBS2_MIS_ID DTV_STREAM_ID
@Mauro, should we rename also DTV_ISDBS_TS_ID to DTV_ISDBS_TS_ID_LEGACY
to remind users ?
> -#define DTV_DVBT2_PLP_ID 43
> +#define DTV_DVBT2_PLP_ID_LEGACY 43
>
> #define DTV_ENUM_DELSYS 44
>
> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
> index 7c64c09..bec0cda 100644
> --- a/drivers/media/dvb/dvb-core/dvb_frontend.h
> +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
> @@ -368,11 +368,8 @@ struct dtv_frontend_properties {
> u8 interleaving;
> } layer[3];
>
> - /* ISDB-T specifics */
> - u32 isdbs_ts_id;
> -
> - /* DVB-T2 specifics */
> - u32 dvbt2_plp_id;
> + /* Multistream specifics */
> + u32 stream_id;
u32 == 32 bit long unsigned number. See next comment.
>
> /* ATSC-MH specifics */
> u8 atscmh_fic_ver;
> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
> index aebcdf2..bccd245 100644
> --- a/drivers/media/dvb/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
> @@ -946,8 +946,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
> c->layer[i].segment_count = 0;
> }
>
> - c->isdbs_ts_id = 0;
> - c->dvbt2_plp_id = 0;
> + c->stream_id = -1;
unsigned number cannot be -1. It can be only 0 or bigger. Due to that
this is wrong.
>
> switch (c->delivery_system) {
> case SYS_DVBS:
> @@ -1017,8 +1016,8 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
> _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
> _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
>
> - _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
> - _DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
> + _DTV_CMD(DTV_STREAM_ID, 1, 0),
> + _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0),
>
> /* Get */
> _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
> @@ -1382,11 +1381,10 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
> case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
> tvp->u.data = c->layer[2].interleaving;
> break;
> - case DTV_ISDBS_TS_ID:
> - tvp->u.data = c->isdbs_ts_id;
> - break;
> - case DTV_DVBT2_PLP_ID:
> - tvp->u.data = c->dvbt2_plp_id;
> +
> + case DTV_STREAM_ID:
> + case DTV_DVBT2_PLP_ID_LEGACY:
> + tvp->u.data = c->stream_id;
> break;
>
> /* ATSC-MH */
> @@ -1771,11 +1769,10 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
> case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
> c->layer[2].interleaving = tvp->u.data;
> break;
> - case DTV_ISDBS_TS_ID:
> - c->isdbs_ts_id = tvp->u.data;
> - break;
> - case DTV_DVBT2_PLP_ID:
> - c->dvbt2_plp_id = tvp->u.data;
> +
> + case DTV_STREAM_ID:
> + case DTV_DVBT2_PLP_ID_LEGACY:
> + c->stream_id = tvp->u.data;
> break;
>
> /* ATSC-MH */
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-08-16 18:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-16 17:46 [PATCH] dvb_frontend: Multistream support CrazyCat
2012-08-16 18:11 ` Antti Palosaari [this message]
2012-08-16 23:14 ` Mauro Carvalho Chehab
2012-08-17 17:21 ` CrazyCat
2012-08-17 18:52 ` Antti Palosaari
2012-08-17 19:01 ` Mauro Carvalho Chehab
2012-08-21 0:42 ` CrazyCat
2012-08-21 20:42 ` Georgi Chorbadzhiyski
2012-09-11 18:18 ` Mauro Carvalho Chehab
2012-08-17 17:52 ` CrazyCat
2012-08-17 18:48 ` Mauro Carvalho Chehab
2012-08-17 1:11 ` Akihiro TSUKADA
-- strict thread matches above, loose matches on Subject: below --
2012-09-13 14:13 CrazyCat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=502D37CF.7030608@iki.fi \
--to=crope@iki.fi \
--cc=crazycat69@yandex.ru \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).