From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-lpp01m010-f46.google.com ([209.85.215.46]:62785 "EHLO mail-lpp01m010-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753424Ab2HUPlk (ORCPT ); Tue, 21 Aug 2012 11:41:40 -0400 Received: by lagy9 with SMTP id y9so3976880lag.19 for ; Tue, 21 Aug 2012 08:41:38 -0700 (PDT) Message-ID: <5033AC22.608@iki.fi> Date: Tue, 21 Aug 2012 18:41:22 +0300 From: Antti Palosaari MIME-Version: 1.0 To: "M. Fletcher" CC: linux-media@vger.kernel.org Subject: Re: Unable to load dvb-usb-rtl2832u driver in Ubuntu 12.04 References: <00f301cd7fb1$b596f2c0$20c4d840$@cam.ac.uk> <5033A9C3.7090501@iki.fi> <00f401cd7fb2$d402c530$7c084f90$@cam.ac.uk> In-Reply-To: <00f401cd7fb2$d402c530$7c084f90$@cam.ac.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 08/21/2012 06:37 PM, M. Fletcher wrote: >> It should be inside drivers/media/usb/dvb-usb-v2/ modinfo dvb_usb_rtl28xxu > should list it. > > Correct, it was in drivers/media/usb/dvb-usb-v2/ > modinfo gives the expected output > >> Also it is highly possible your device usb id is not known >by driver, you > should add it, easiest is just replace some existing rtl2832u device id. > > Can you please advise how I do this? lsusb gives my device ID as 185b:0680 Open the rtl28xxu.c file and find line: { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, replace it: { DVB_USB_DEVICE(0x185b, 0x0680, Compile and install. Enable debugs: #modprobe dvb_usb_rtl28xxu; echo -n 'module dvb_usb_rtl28xxu +p' > /sys/kernel/debug/dynamic_debug/control plug stick in and look what dmesg says. With a good luck there is supported RF-tuner and it works, but most likely there is some RF-tuner which is not supported and it does not work. regards Antti -- http://palosaari.fi/