linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antti Palosaari <crope@iki.fi>
To: "M. Fletcher" <mpf30@cam.ac.uk>
Cc: linux-media@vger.kernel.org
Subject: Re: Unable to load dvb-usb-rtl2832u driver in Ubuntu 12.04
Date: Tue, 21 Aug 2012 19:16:25 +0300	[thread overview]
Message-ID: <5033B459.1020401@iki.fi> (raw)
In-Reply-To: <00f501cd7fb7$f93fc0a0$ebbf41e0$@cam.ac.uk>

On 08/21/2012 07:13 PM, M. Fletcher wrote:
>> Open the rtl28xxu.c file and find line:
>> 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, replace
> it:
>> 	{ DVB_USB_DEVICE(0x185b, 0x0680,
>
> Line changed as follows:
>
> //{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
> { DVB_USB_DEVICE(0x185b, 0x0680,
> 	&rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) },
>
>> Compile and install.
>
> Successful.
>
>> Enable debugs:
>> #modprobe dvb_usb_rtl28xxu; echo -n 'module dvb_usb_rtl28xxu +p' >
> /sys/kernel/debug/dynamic_debug/control
>
> Executing this entire line produced:
> bash: /sys/kernel/debug/dynamic_debug/control: No such file or directory
>
> Succesfully executed:
> modprobe dvb_usb_rtl28xxu
>
> Module loaded:
> root@DCTbox:/# lsmod | grep dvb
> dvb_usb_rtl28xxu       18522  0
> dvb_usbv2              23726  1 dvb_usb_rtl28xxu
> rc_core                26343  2 dvb_usb_rtl28xxu,dvb_usbv2
> rtl2830                18340  1 dvb_usb_rtl28xxu
> dvb_core              110590  2 dvb_usbv2,rtl2830
>
>> plug stick in and look what dmesg says. With a good luck there is supported
> RF-tuner and it works, but most likely there is some RF-tuner which is >not
> supported and it does not work.
>
> root@DCTbox:/home/dct# dmesg
> [  136.285497] usb 5-2: new high-speed USB device number 4 using xhci_hcd
> [  136.319609] usb 5-2: ep 0x81 - rounding interval to 32768 microframes, ep
> desc says 0 microframes
> [  136.367747] WARNING: You are using an experimental version of the media
> stack.
> [  136.367748] 	As the driver is backported to an older kernel, it doesn't
> offer
> [  136.367749] 	enough quality for its usage in production.
> [  136.367750] 	Use it with care.
> [  136.367750] Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> [  136.367751] 	9b78c5a3007e10a172d4e83bea18509fdff2e8e3 [media] b2c2:
> export b2c2_flexcop_debug symbol
> [  136.367752] 	88f8472c9fc6c08f5113887471f1f4aabf7b2929 [media] Fix some
> Makefile rules
> [  136.367753] 	893430558e5bf116179915de2d3d119ad25c01cf [media]
> cx23885-cards: fix netup card default revision
> [  136.389963] WARNING: You are using an experimental version of the media
> stack.
> [  136.389964] 	As the driver is backported to an older kernel, it doesn't
> offer
> [  136.389965] 	enough quality for its usage in production.
> [  136.389965] 	Use it with care.
> [  136.389966] Latest git patches (needed if you report a bug to
> linux-media@vger.kernel.org):
> [  136.389966] 	9b78c5a3007e10a172d4e83bea18509fdff2e8e3 [media] b2c2:
> export b2c2_flexcop_debug symbol
> [  136.389967] 	88f8472c9fc6c08f5113887471f1f4aabf7b2929 [media] Fix some
> Makefile rules
> [  136.389968] 	893430558e5bf116179915de2d3d119ad25c01cf [media]
> cx23885-cards: fix netup card default revision
> [  136.407633] usb 5-2: dvb_usbv2: found a 'NOXON DAB/DAB+ USB dongle' in
> warm state
> [  136.407655] usbcore: registered new interface driver dvb_usb_rtl28xxu
> [  136.434729] usb 5-2: dvb_usbv2: will pass the complete MPEG2 transport
> stream to the software demuxer
> [  136.434796] DVB: registering new adapter (NOXON DAB/DAB+ USB dongle)
> [  136.470930] usb 5-2: dvb_usb_rtl28xxu: E4000 tuner found
> [  136.482557] usb 5-2: dvb_usbv2: 'NOXON DAB/DAB+ USB dongle' error while
> loading driver (-19)
> [  136.483313] usb 5-2: dvb_usbv2: 'NOXON DAB/DAB+ USB dongle' successfully
> deinitialized and disconnected
>
> If this is an unsupported tuner do I need to get a different usb device or
> can I try a different rtl driver?

No luck, no driver for e4000.

I think vendor driver could support your device, try to find it.

regards
Antti

-- 
http://palosaari.fi/

  reply	other threads:[~2012-08-21 16:16 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-21 15:29 Unable to load dvb-usb-rtl2832u driver in Ubuntu 12.04 M. Fletcher
2012-08-21 15:31 ` Antti Palosaari
2012-08-21 15:37   ` M. Fletcher
2012-08-21 15:41     ` Antti Palosaari
2012-08-21 16:13       ` M. Fletcher
2012-08-21 16:16         ` Antti Palosaari [this message]
2012-08-21 17:54           ` M. Fletcher
2012-08-21 17:56             ` Antti Palosaari
2012-08-21 22:45             ` poma
  -- strict thread matches above, loose matches on Subject: below --
2012-08-21 14:24 M. Fletcher
2012-08-21 14:31 ` Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5033B459.1020401@iki.fi \
    --to=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=mpf30@cam.ac.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).