From: poma <pomidorabelisima@gmail.com>
To: Antti Palosaari <crope@iki.fi>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH 1/5] rtl28xxu: stream did not start after stop on USB3.0
Date: Sat, 01 Sep 2012 15:33:14 +0200 [thread overview]
Message-ID: <50420E9A.6000800@gmail.com> (raw)
In-Reply-To: <1345593382-11367-1-git-send-email-crope@iki.fi>
On 08/22/2012 01:56 AM, Antti Palosaari wrote:
> Stream did not start anymore after stream was stopped once.
>
> Following error can be seen, xhci_hcd
> WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
>
> usb_clear_halt for streaming endpoint helps.
>
> Signed-off-by: Antti Palosaari <crope@iki.fi>
> ---
> drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> index d2b1505..1ccb99b 100644
> --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> @@ -834,6 +834,7 @@ static int rtl28xxu_streaming_ctrl(struct dvb_frontend *fe , int onoff)
> if (onoff) {
> buf[0] = 0x00;
> buf[1] = 0x00;
> + usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
> } else {
> buf[0] = 0x10; /* stall EPA */
> buf[1] = 0x02; /* reset EPA */
>
After every soft/warm [re]boot only after first scandvb:
------------[ cut here ]------------
WARNING: at drivers/usb/host/ehci-hcd.c:1226
ehci_endpoint_reset+0x111/0x120()
Hardware name: M720-US3
clear_halt for a busy endpoint
Modules linked in: fc0012(O) rtl2832(O) dvb_usb_rtl28xxu(O) rtl2830(O)
dvb_usbv2(O) dvb_core(O) nvidia(PO) tvaudio(O) tda7432(O) msp3400(O)
tuner_simple(O) tuner_types(O) wm8775(O) snd_hda_codec_realtek
tda9887(O) tda8290(O) tuner(O) cx25840(O) snd_hda_intel snd_bt87x
bttv(O) ivtv(O) snd_hda_codec snd_hwdep tveeprom(O) cx2341x(O)
btcx_risc(O) snd_pcm snd_page_alloc snd_timer snd soundcore ppdev
videobuf_dma_sg(O) videobuf_core(O) v4l2_common(O) parport_serial
parport_pc parport videodev(O) edac_core media(O) i2c_nforce2 rc_core(O)
i2c_algo_bit microcode i2c_core edac_mce_amd vhost_net tun macvtap
macvlan kvm_amd kvm uinput binfmt_misc raid1 r8169 ata_generic pata_acpi
mii usb_storage skge pata_amd wmi sunrpc be2iscsi bnx2i cnic uio cxgb4i
cxgb4 cxgb3i cxgb3 mdio libcxgbi libiscsi_tcp qla4xxx iscsi_boot_sysfs
libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan]
Pid: 1170, comm: scandvb Tainted: P O 3.5.2-3.fc17.x86_64 #1
Call Trace:
[<ffffffff810584bf>] warn_slowpath_common+0x7f/0xc0
[<ffffffff810585b6>] warn_slowpath_fmt+0x46/0x50
[<ffffffff81444a31>] ehci_endpoint_reset+0x111/0x120
[<ffffffff8142c135>] usb_hcd_reset_endpoint+0x25/0x70
[<ffffffff8142d468>] usb_reset_endpoint+0x28/0x40
[<ffffffff8142e06e>] usb_clear_halt+0x6e/0x80
[<ffffffffa0f2baed>] rtl28xxu_streaming_ctrl+0xad/0x110 [dvb_usb_rtl28xxu]
[<ffffffffa0f50375>] dvb_usb_start_feed+0x235/0x440 [dvb_usbv2]
[<ffffffff8115ca5d>] ? __vmalloc_node_range+0x17d/0x240
[<ffffffffa0f111b9>] ? dvb_dmxdev_filter_start+0x2c9/0x3e0 [dvb_core]
[<ffffffffa0f12b00>] dmx_section_feed_start_filtering+0xe0/0x180 [dvb_core]
[<ffffffffa0f110fe>] dvb_dmxdev_filter_start+0x20e/0x3e0 [dvb_core]
[<ffffffffa0f11945>] dvb_demux_do_ioctl+0x405/0x640 [dvb_core]
[<ffffffffa0f11540>] ? dvb_dvr_do_ioctl+0x130/0x130 [dvb_core]
[<ffffffffa0f0fa36>] dvb_usercopy+0x86/0x1d0 [dvb_core]
[<ffffffff811976d1>] ? do_filp_open+0x41/0xa0
[<ffffffffa0f0ffa5>] dvb_demux_ioctl+0x15/0x20 [dvb_core]
[<ffffffff811996c9>] do_vfs_ioctl+0x99/0x580
[<ffffffff812793da>] ? inode_has_perm.isra.31.constprop.61+0x2a/0x30
[<ffffffff8127a9b7>] ? file_has_perm+0x97/0xb0
[<ffffffff81199c49>] sys_ioctl+0x99/0xa0
[<ffffffff81614969>] system_call_fastpath+0x16/0x1b
---[ end trace cce2913a24da6585 ]---
media_build
commit 420335f564c32517a791ecea3909af233925634d
Cheers,
poma
next prev parent reply other threads:[~2012-09-01 13:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 23:56 [PATCH 1/5] rtl28xxu: stream did not start after stop on USB3.0 Antti Palosaari
2012-08-21 23:56 ` [PATCH 2/5] rtl28xxu: fix rtl2832u module reload fails bug Antti Palosaari
2012-09-01 13:54 ` poma
2012-08-21 23:56 ` [PATCH 3/5] rtl2832: implement .get_frontend() Antti Palosaari
2012-08-21 23:56 ` [PATCH 4/5] rtl2832: implement .read_snr() Antti Palosaari
2012-08-21 23:56 ` [PATCH 5/5] rtl2832: implement .read_ber() Antti Palosaari
2012-09-01 13:33 ` poma [this message]
2012-09-01 13:50 ` [PATCH 1/5] rtl28xxu: stream did not start after stop on USB3.0 Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50420E9A.6000800@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).