From: Oliver Schinagl <oliver+list@schinagl.nl>
To: linux-media <linux-media@vger.kernel.org>
Cc: Antti Palosaari <crope@iki.fi>
Subject: Re: [PATCH] Support for Asus MyCinema U3100Mini Plus
Date: Sun, 09 Sep 2012 22:49:00 +0200 [thread overview]
Message-ID: <504D00BC.4040109@schinagl.nl> (raw)
In-Reply-To: <1347223647-645-1-git-send-email-oliver+list@schinagl.nl>
Hi All/Antti,
I used Antti's previous patch to try to get some support in for the Asus
MyCinema U3100Mini Plus as it uses a supported driver (af9035) and now
supported tuner (FCI FC2580).
It compiles fine and almost works :(
Here's what I get, which I have no idea what causes it.
dmesg output:
[ 380.677434] usb 1-3: New USB device found, idVendor=0b05, idProduct=1779
[ 380.677445] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 380.677452] usb 1-3: Product: AF9035A USB Device
[ 380.677458] usb 1-3: Manufacturer: Afa Technologies Inc.
[ 380.677463] usb 1-3: SerialNumber: AF01020abcdef12301
[ 380.683361] input: Afa Technologies Inc. AF9035A USB Device as
/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.1/input/input15
[ 380.683505] hid-generic 0003:0B05:1779.0004: input: USB HID v1.01
Keyboard [Afa Technologies Inc. AF9035A USB Device] on
usb-0000:00:12.2-3/input1
[ 380.703807] usbcore: registered new interface driver dvb_usb_af9035
[ 380.704553] usb 1-3: dvb_usbv2: found a 'Asus U3100Mini Plus' in cold
state
[ 380.705075] usb 1-3: dvb_usbv2: downloading firmware from file
'dvb-usb-af9035-02.fw'
[ 381.014996] dvb_usb_af9035: firmware version=11.5.9.0
[ 381.015018] usb 1-3: dvb_usbv2: found a 'Asus U3100Mini Plus' in warm
state
[ 381.017172] usb 1-3: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[ 381.017242] DVB: registering new adapter (Asus U3100Mini Plus)
[ 381.037184] af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 381.037200] usb 1-3: DVB: registering adapter 0 frontend 0 (Afatech
AF9033 (DVB-T))...
[ 381.044197] i2c i2c-1: fc2580: i2c rd failed=-5 reg=01 len=1
[ 381.044357] usb 1-3: dvb_usbv2: 'Asus U3100Mini Plus' error while
loading driver (-19)
using the following modules.
fc2580 4189 -1
af9033 10266 0
dvb_usb_af9035 8924 0
dvb_usbv2 11388 1 dvb_usb_af9035
dvb_core 71756 1 dvb_usbv2
rc_core 10583 2 dvb_usbv2,dvb_usb_af9035
I'm supprised though that dvb-pll isn't there. Wasn't that a
requirement? [1]
For the tuner 'script' firmware/init bit, I used the 'official' driver [2].
Also the i2c-addr and clock comes from these files.
One minor questions I have regarding the recently submitted RTL and
AF9033 drivers, is one uses AF9033_TUNER_* whereas the other uses
TUNER_RTL2832_*. Any reason for this? It just confused me is all.
Oliver
[1] http://linuxtv.org/wiki/index.php/DVB_via_USB#Introduction
[2] http://git.schinagl.nl/AF903x_SRC.git/tree/api/FCI_FC2580_Script.h
On 09/09/12 22:47, oliver@schinagl.nl wrote:
> From: Oliver Schinagl<oliver@schinagl.nl>
>
> Initial support for the Asus MyCinema U3100Mini Plus. This currently
> does not work however. It uses teh af9033/5 demodulater with an
> FCI FC2580 tuner.
>
> Signed-off-by: Oliver Schinagl<oliver@schinagl.nl>
> ---
> drivers/media/dvb-core/dvb-usb-ids.h | 1 +
> drivers/media/dvb-frontends/af9033.c | 4 ++++
> drivers/media/dvb-frontends/af9033.h | 1 +
> drivers/media/dvb-frontends/af9033_priv.h | 36 +++++++++++++++++++++++++++++++
> drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
> drivers/media/usb/dvb-usb-v2/af9035.c | 12 +++++++++++
> drivers/media/usb/dvb-usb-v2/af9035.h | 1 +
> 7 files changed, 56 insertions(+)
>
> diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
> index d572307..58e0220 100644
> --- a/drivers/media/dvb-core/dvb-usb-ids.h
> +++ b/drivers/media/dvb-core/dvb-usb-ids.h
> @@ -329,6 +329,7 @@
> #define USB_PID_ASUS_U3000 0x171f
> #define USB_PID_ASUS_U3000H 0x1736
> #define USB_PID_ASUS_U3100 0x173f
> +#define USB_PID_ASUS_U3100MINI_PLUS 0x1779
> #define USB_PID_YUAN_EC372S 0x1edc
> #define USB_PID_YUAN_STK7700PH 0x1f08
> #define USB_PID_YUAN_PD378S 0x2edc
> diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c
> index cd8c883..1568c6a 100644
> --- a/drivers/media/dvb-frontends/af9033.c
> +++ b/drivers/media/dvb-frontends/af9033.c
> @@ -318,6 +318,10 @@ static int af9033_init(struct dvb_frontend *fe)
> len = ARRAY_SIZE(tuner_init_tda18218);
> init = tuner_init_tda18218;
> break;
> + case AF9033_TUNER_FC2580:
> + len = ARRAY_SIZE(tuner_init_fc2580);
> + init = tuner_init_fc2580;
> + break;
> default:
> pr_debug("%s: unsupported tuner ID=%d\n", __func__,
> state->cfg.tuner);
> diff --git a/drivers/media/dvb-frontends/af9033.h b/drivers/media/dvb-frontends/af9033.h
> index 9e302c3..3dd6edd 100644
> --- a/drivers/media/dvb-frontends/af9033.h
> +++ b/drivers/media/dvb-frontends/af9033.h
> @@ -42,6 +42,7 @@ struct af9033_config {
> #define AF9033_TUNER_FC0011 0x28 /* Fitipower FC0011 */
> #define AF9033_TUNER_MXL5007T 0xa0 /* MaxLinear MxL5007T */
> #define AF9033_TUNER_TDA18218 0xa1 /* NXP TDA 18218HN */
> +#define AF9033_TUNER_FC2580 0x32 /* FCI FC2580 */
> u8 tuner;
>
> /*
> diff --git a/drivers/media/dvb-frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h
> index 0b783b9..4126255 100644
> --- a/drivers/media/dvb-frontends/af9033_priv.h
> +++ b/drivers/media/dvb-frontends/af9033_priv.h
> @@ -466,5 +466,41 @@ static const struct reg_val tuner_init_tda18218[] = {
> {0x80f1e6, 0x00},
> };
>
> +static const struct reg_val tuner_init_fc2580[] = {
> + { 0x800046, AF9033_TUNER_FC2580 },
> + { 0x800057, 0x01 },
> + { 0x800058, 0x00 },
> + { 0x80005f, 0x00 },
> + { 0x800060, 0x00 },
> + { 0x800071, 0x05 },
> + { 0x800072, 0x02 },
> + { 0x800074, 0x01 },
> + { 0x800079, 0x01 },
> + { 0x800093, 0x00 },
> + { 0x800094, 0x00 },
> + { 0x800095, 0x00 },
> + { 0x800096, 0x05 },
> + { 0x8000b3, 0x01 },
> + { 0x8000c3, 0x01 },
> + { 0x8000c4, 0x00 },
> + { 0x80f007, 0x00 },
> + { 0x80f00c, 0x19 },
> + { 0x80f00d, 0x1A },
> + { 0x80f00e, 0x00 },
> + { 0x80f00f, 0x02 },
> + { 0x80f010, 0x00 },
> + { 0x80f011, 0x02 },
> + { 0x80f012, 0x00 },
> + { 0x80f013, 0x02 },
> + { 0x80f014, 0x00 },
> + { 0x80f015, 0x02 },
> + { 0x80f01f, 0x96 },
> + { 0x80f020, 0x00 },
> + { 0x80f029, 0x96 },
> + { 0x80f02a, 0x00 },
> + { 0x80f077, 0x01 },
> + { 0x80f1e6, 0x01 },
> +};
> +
> #endif /* AF9033_PRIV_H */
>
> diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
> index e09930c..834bfec 100644
> --- a/drivers/media/usb/dvb-usb-v2/Kconfig
> +++ b/drivers/media/usb/dvb-usb-v2/Kconfig
> @@ -40,6 +40,7 @@ config DVB_USB_AF9035
> select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
> + select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
> help
> Say Y here to support the Afatech AF9035 based DVB USB receiver.
>
> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
> index 9e5bbf9..952fbdb 100644
> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> @@ -546,6 +546,7 @@ static int af9035_read_config(struct dvb_usb_device *d)
> case AF9033_TUNER_FC0011:
> case AF9033_TUNER_MXL5007T:
> case AF9033_TUNER_TDA18218:
> + case AF9033_TUNER_FC2580:
> state->af9033_config[i].spec_inv = 1;
> break;
> default:
> @@ -798,6 +799,11 @@ static struct tda18218_config af9035_tda18218_config = {
> .i2c_wr_max = 21,
> };
>
> +static struct fc2580_config af9035_fc2580_config = {
> + .i2c_addr = 0xac,
> + .clock = 16384000,
> +};
> +
> static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
> {
> struct state *state = adap_to_priv(adap);
> @@ -903,6 +909,10 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
> fe = dvb_attach(tda18218_attach, adap->fe[0],
> &d->i2c_adap,&af9035_tda18218_config);
> break;
> + case AF9033_TUNER_FC2580:
> + fe = dvb_attach(fc2580_attach, adap->fe[0],
> + &d->i2c_adap,&af9035_fc2580_config);
> + break;
> default:
> fe = NULL;
> }
> @@ -1126,6 +1136,8 @@ static const struct usb_device_id af9035_id_table[] = {
> &af9035_props, "AVerMedia HD Volar (A867)", NULL) },
> { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR,
> &af9035_props, "AVerMedia Twinstar (A825)", NULL) },
> + { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS,
> + &af9035_props, "Asus U3100Mini Plus", NULL) },
> { }
> };
> MODULE_DEVICE_TABLE(usb, af9035_id_table);
> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
> index bb7bc7a..4864d9a 100644
> --- a/drivers/media/usb/dvb-usb-v2/af9035.h
> +++ b/drivers/media/usb/dvb-usb-v2/af9035.h
> @@ -28,6 +28,7 @@
> #include "fc0011.h"
> #include "mxl5007t.h"
> #include "tda18218.h"
> +#include "fc2580.h"
>
> struct reg_val {
> u32 reg;
next prev parent reply other threads:[~2012-09-09 20:48 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-09 20:47 [PATCH] Support for Asus MyCinema U3100Mini Plus oliver
2012-09-09 20:49 ` Oliver Schinagl [this message]
2012-09-09 21:51 ` Antti Palosaari
2012-09-09 22:26 ` Oliver Schinagl
2012-09-09 22:29 ` Antti Palosaari
2012-09-10 9:58 ` Oliver Schinagl
2012-09-10 11:46 ` Antti Palosaari
2012-09-10 14:29 ` Oliver Schinagl
2012-09-10 17:28 ` Oliver Schinagl
2012-09-16 14:07 ` Oliver Schinagl
2012-09-16 16:43 ` Antti Palosaari
2012-09-16 15:03 ` Oliver Schinagl
2012-09-16 17:25 ` Antti Palosaari
2012-09-16 22:10 ` Oliver Schinagl
2012-09-16 23:36 ` Antti Palosaari
2012-09-17 8:25 ` Oliver Schinagl
2012-09-17 13:02 ` Oliver Schinagl
2012-09-17 13:16 ` Antti Palosaari
2012-09-17 13:26 ` Oliver Schinagl
2012-09-17 13:52 ` Antti Palosaari
2012-09-17 15:20 ` Oliver Schinagl
2012-09-17 20:43 ` Oliver Schinagl
2012-09-17 21:07 ` Antti Palosaari
2012-09-17 21:57 ` Oliver Schinagl
2012-09-18 17:18 ` Oliver Schinagl
2012-09-18 22:51 ` Antti Palosaari
2012-09-19 10:41 ` Oliver Schinagl
2012-09-19 10:53 ` Antti Palosaari
2012-09-17 20:43 ` Oliver Schinagl
2012-09-18 22:59 ` Antti Palosaari
-- strict thread matches above, loose matches on Subject: below --
2012-09-19 18:44 oliver
2012-09-19 20:52 ` Devin Heitmueller
2012-09-19 22:47 ` Oliver Schinagl
2012-09-20 18:54 ` Oliver Schinagl
2012-09-20 19:21 ` Devin Heitmueller
2012-09-19 21:36 ` Antti Palosaari
2012-09-20 18:54 ` Oliver Schinagl
2012-09-20 18:57 oliver
2012-09-20 19:15 ` Antti Palosaari
2012-09-20 19:28 ` Oliver Schinagl
2012-09-20 19:37 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=504D00BC.4040109@schinagl.nl \
--to=oliver+list@schinagl.nl \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).