Cinergy T Stick Dual RC (rev. 2)

Cinergy T Stick Dual RC (rev. 2)

[Damien Bally]

[-- Attachment #1: Type: text/plain, Size: 839 bytes --]

Hello

I bought this card because it is supported since kernel 2.6.37 according 
to this page :

http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC

As it it was not recognized by OpenSuse 11.4 (the kernel just sees a 
keyboard) I googled a while and found that rev.2 was not (and noticed 
the little sticker on my device confirming it).

According to this page : 
http://ein-eike.de/2012/08/07/terratec-cinergy-t-stick-dual-rc-revision-2 the 
device contains it9133 and it9137 chips which are supported since 3.4 
kernels. So I patched and compiled successfully the last linux-media 
sources and intalled the adhoc firmwares.

It seems to work quite well with VDR : I managed to record 
simultaneously 2 streams on different transponders while watching live 
TV, but I haven't yet tested the remote control part.

Damien




[-- Attachment #2: it913x.c.patch --]
[-- Type: text/x-patch, Size: 451 bytes --]

--- it913x.c.orig	2012-09-17 19:04:59.819197365 +0200
+++ it913x.c	2012-09-14 00:18:42.371616299 +0200
@@ -773,6 +773,9 @@
 	{ DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006,
 		&it913x_properties, "ITE 9135(9006) Generic",
 			RC_MAP_IT913X_V1) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+		&it913x_properties, "ITE 9135(9006) Generic",
+			RC_MAP_IT913X_V1) },
 	{}		/* Terminating entry */
 };
 

[-- Attachment #3: dmesg-terratec-cinergy-dual.txt --]
[-- Type: text/plain, Size: 2294 bytes --]

[ 2686.477020] usb 2-1: new high speed USB device using ehci_hcd and address 3
[ 2686.595464] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099
[ 2686.595467] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2686.595470] usb 2-1: Product: DVB-T TV Stick
[ 2686.595472] usb 2-1: Manufacturer: ITE Technologies, Inc.
[ 2686.598080] it913x: Chip Version=01 Chip Type=9135
[ 2686.598187] input: ITE Technologies, Inc. DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.1/input/input7
[ 2686.598275] generic-usb 0003:0CCD:0099.0002: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:1d.7-1/input1
[ 2686.599660] it913x: Remote HID mode NOT SUPPORTED
[ 2686.600145] it913x: Dual mode=3 Tuner Type=0
[ 2686.704201] it913x: Chip Version=01 Chip Type=9135
[ 2686.706070] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in cold state
[ 2686.707314] usb 2-1: dvb_usbv2: downloading firmware from file 'dvb-usb-it9135-01.fw'
[ 2686.707694] it913x: FRM Starting Firmware Download
[ 2687.408601] it913x: FRM Firmware Download Completed - Resetting Device
[ 2687.440973] it913x: Chip Version=01 Chip Type=9135
[ 2687.441348] it913x: Firmware Version 204869120
[ 2687.509095] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in warm state
[ 2687.509147] usb 2-1: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2687.509362] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 2687.513588] it913x-fe: ADF table value	:00
[ 2687.517338] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
[ 2687.557833] it913x-fe: Tuner LNA type :38
[ 2687.610078] DVB: registering adapter 0 frontend 0 (ITE 9135(9006) Generic_1)...
[ 2687.610133] usb 2-1: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2687.610331] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 2687.624700] it913x-fe: ADF table value	:00
[ 2687.649447] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
[ 2687.905914] it913x-fe: Tuner LNA type :38
[ 2688.212137] DVB: registering adapter 1 frontend 0 (ITE 9135(9006) Generic_2)...
[ 2688.212208] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully initialized and connected

Re: Cinergy T Stick Dual RC (rev. 2)

[Mauro Carvalho Chehab]

Hi Damien,

Em Mon, 17 Sep 2012 19:29:00 +0200
Damien Bally <biribi@free.fr> escreveu:

> Hello
> 
> I bought this card because it is supported since kernel 2.6.37 according 
> to this page :
> 
> http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC
> 
> As it it was not recognized by OpenSuse 11.4 (the kernel just sees a 
> keyboard) I googled a while and found that rev.2 was not (and noticed 
> the little sticker on my device confirming it).
> 
> According to this page : 
> http://ein-eike.de/2012/08/07/terratec-cinergy-t-stick-dual-rc-revision-2 the 
> device contains it9133 and it9137 chips which are supported since 3.4 
> kernels. So I patched and compiled successfully the last linux-media 
> sources and intalled the adhoc firmwares.
> 
> It seems to work quite well with VDR : I managed to record 
> simultaneously 2 streams on different transponders while watching live 
> TV, but I haven't yet tested the remote control part.

In order to submit a patch, it needs to be at the diff -p1 format, e. g.
the patches should be like:
	something/drivers/media/.../it913x.c

Also, you need to add your Signed-Off-By at the email [1]. You should also
copy the driver maintainer (Malcolm Priestley <tvboxspy@gmail.com>) as
I generally expect him to pick those patches, and submit them to me.
Well, this one in particular is trivial, as it is just a new USB ID addition,
so I generally just apply those kind of patches directly, if the driver maintainer
didn't get it before me.

So, could you please fix those issues and resent the patch?

Thanks,
Mauro

[1] See: http://linuxtv.org/wiki/index.php/Development:_How_to_submit_patches