* [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video
@ 2012-09-03 20:14 Alfredo Jesús Delaiti
2012-09-18 16:16 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Alfredo Jesús Delaiti @ 2012-09-03 20:14 UTC (permalink / raw)
To: linux-media
Hi
This patch add audio support for input YPbPr, AV and S-Video for Mygica
X8507 card.
I tried it with the 3.4 and 3.5 kernel
Remains to be done: IR, FM and ISDBT
Sorry if I sent the patch improperly.
Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
diff --git a/media/video/cx23885/cx23885-cards.c b/media/video/cx23885/cx23885-cards.c
index 080e111..17e2576 100644
--- a/media/video/cx23885/cx23885-cards.c
+++ b/media/video/cx23885/cx23885-cards.c
@@ -541,11 +541,13 @@ struct cx23885_board cx23885_boards[] = {
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_COMPONENT,
@@ -553,6 +555,7 @@ struct cx23885_board cx23885_boards[] = {
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
+ .amux = CX25840_AUDIO7,
},
},
},
diff --git a/media/video/cx23885/cx23885-video.c b/media/video/cx23885/cx23885-video.c
index 22f8e7f..fcb3f22 100644
--- a/media/video/cx23885/cx23885-video.c
+++ b/media/video/cx23885/cx23885-video.c
@@ -508,7 +508,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
- (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_MYGICA_X8507)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
--
Dona tu voz
http://www.voxforge.org/es
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video
2012-09-03 20:14 [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video Alfredo Jesús Delaiti
@ 2012-09-18 16:16 ` Mauro Carvalho Chehab
2012-09-19 13:31 ` Alfredo Jesús Delaiti
0 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2012-09-18 16:16 UTC (permalink / raw)
To: Alfredo Jesús Delaiti; +Cc: linux-media
Em 03-09-2012 17:14, Alfredo Jesús Delaiti escreveu:
> Hi
>
> This patch add audio support for input YPbPr, AV and S-Video for Mygica X8507 card.
> I tried it with the 3.4 and 3.5 kernel
>
> Remains to be done: IR, FM and ISDBT
>
> Sorry if I sent the patch improperly.
>
> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>
>
>
> diff --git a/media/video/cx23885/cx23885-cards.c b/media/video/cx23885/cx23885-cards.c
> index 080e111..17e2576 100644
> --- a/media/video/cx23885/cx23885-cards.c
> +++ b/media/video/cx23885/cx23885-cards.c
Wrong format... the "drivers/" is missing.
Well, the location also changed to drivers/media/pci, but my scripts can
fix it.
> @@ -541,11 +541,13 @@ struct cx23885_board cx23885_boards[] = {
> {
> .type = CX23885_VMUX_COMPOSITE1,
> .vmux = CX25840_COMPOSITE8,
> + .amux = CX25840_AUDIO7,
Didn't apply well. It seems it conflicted with some other patch.
Please, re-generate it against the very latest tree.
Also, when doing diffs for the boards entries, it is wise to have
more context lines, in order that a patch made for one driver would
be badly applied at some other board entry.
The easiest way to do that is to do:
$ git diff -U10
or
$ git show -U10
(if you've merged the patch at your local copy)
(if you're generating the patch against the main media-tree.git)
Where "10" is just an arbitrary large number that will allow to
see the board name that will be modified, like:
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -531,20 +531,21 @@ struct cx23885_board cx23885_boards[] = {
.name = "Mygica X8507",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
.amux = CX25840_AUDIO8,
+ /* Some foo addition - just for testing */
},
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
},
Thanks,
Mauro
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video
2012-09-18 16:16 ` Mauro Carvalho Chehab
@ 2012-09-19 13:31 ` Alfredo Jesús Delaiti
2012-09-19 16:28 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Alfredo Jesús Delaiti @ 2012-09-19 13:31 UTC (permalink / raw)
To: linux-media; +Cc: Mauro Carvalho Chehab
El 18/09/12 13:16, Mauro Carvalho Chehab escribió:
> Em 03-09-2012 17:14, Alfredo Jesús Delaiti escreveu:
>> Hi
>>
>> This patch add audio support for input YPbPr, AV and S-Video for Mygica X8507 card.
>> I tried it with the 3.4 and 3.5 kernel
>>
>> Remains to be done: IR, FM and ISDBT
>>
>> Sorry if I sent the patch improperly.
>>
>> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>>
>>
>>
>> diff --git a/media/video/cx23885/cx23885-cards.c b/media/video/cx23885/cx23885-cards.c
>> index 080e111..17e2576 100644
>> --- a/media/video/cx23885/cx23885-cards.c
>> +++ b/media/video/cx23885/cx23885-cards.c
> Wrong format... the "drivers/" is missing.
>
> Well, the location also changed to drivers/media/pci, but my scripts can
> fix it.
>
>> @@ -541,11 +541,13 @@ struct cx23885_board cx23885_boards[] = {
>> {
>> .type = CX23885_VMUX_COMPOSITE1,
>> .vmux = CX25840_COMPOSITE8,
>> + .amux = CX25840_AUDIO7,
> Didn't apply well. It seems it conflicted with some other patch.
>
> Please, re-generate it against the very latest tree.
>
> Also, when doing diffs for the boards entries, it is wise to have
> more context lines, in order that a patch made for one driver would
> be badly applied at some other board entry.
>
> The easiest way to do that is to do:
>
> $ git diff -U10
> or
> $ git show -U10
> (if you've merged the patch at your local copy)
>
> (if you're generating the patch against the main media-tree.git)
>
> Where "10" is just an arbitrary large number that will allow to
> see the board name that will be modified, like:
>
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -531,20 +531,21 @@ struct cx23885_board cx23885_boards[] = {
> .name = "Mygica X8507",
> .tuner_type = TUNER_XC5000,
> .tuner_addr = 0x61,
> .tuner_bus = 1,
> .porta = CX23885_ANALOG_VIDEO,
> .input = {
> {
> .type = CX23885_VMUX_TELEVISION,
> .vmux = CX25840_COMPOSITE2,
> .amux = CX25840_AUDIO8,
> + /* Some foo addition - just for testing */
> },
> {
> .type = CX23885_VMUX_COMPOSITE1,
> .vmux = CX25840_COMPOSITE8,
> },
> {
> .type = CX23885_VMUX_SVIDEO,
> .vmux = CX25840_SVIDEO_LUMA3 |
> CX25840_SVIDEO_CHROMA4,
> },
>
>
> Thanks,
> Mauro
Hi
Thanks for the advice.
I resubmit the patch with the advice given.
I apologize, but git and diff, still " aren't my friends"
Thanks
Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
b/drivers/media/pci/cx23885/cx23885-cards.c
index d889bd2..cb5f847 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -530,42 +530,45 @@ struct cx23885_board cx23885_boards[] = {
[CX23885_BOARD_MYGICA_X8507] = {
.name = "Mygica X8507",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
.amux = CX25840_AUDIO8,
},
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
+ .amux = CX25840_AUDIO7,
},
},
},
[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TEVII_S471] = {
.name = "TeVii S471",
.portb = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
diff --git a/drivers/media/pci/cx23885/cx23885-video.c
b/drivers/media/pci/cx23885/cx23885-video.c
index 22f8e7f..fcb3f22 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -496,31 +496,32 @@ static int cx23885_video_mux(struct cx23885_dev
*dev, unsigned int input)
dev->board == CX23885_BOARD_MYGICA_X8507) {
/* Select Analog TV */
if (INPUT(input)->type == CX23885_VMUX_TELEVISION)
cx23885_gpio_clear(dev, GPIO_0);
}
/* Tell the internal A/V decoder */
v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
INPUT(input)->vmux, 0, 0);
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
- (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_MYGICA_X8507)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
if (INPUT(input)->amux == CX25840_AUDIO7)
cx23885_flatiron_mux(dev, 1);
else if (INPUT(input)->amux == CX25840_AUDIO6)
cx23885_flatiron_mux(dev, 2);
}
return 0;
}
static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input)
{
--
Dona tu voz
http://www.voxforge.org/es
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video
2012-09-19 13:31 ` Alfredo Jesús Delaiti
@ 2012-09-19 16:28 ` Mauro Carvalho Chehab
2012-09-21 14:33 ` Alfredo Jesús Delaiti
0 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2012-09-19 16:28 UTC (permalink / raw)
To: Alfredo Jesús Delaiti; +Cc: linux-media
Em 19-09-2012 10:31, Alfredo Jesús Delaiti escreveu:
> El 18/09/12 13:16, Mauro Carvalho Chehab escribió:
>> Em 03-09-2012 17:14, Alfredo Jesús Delaiti escreveu:
>>> Hi
>>>
>>> This patch add audio support for input YPbPr, AV and S-Video for Mygica X8507 card.
>>> I tried it with the 3.4 and 3.5 kernel
>>>
>>> Remains to be done: IR, FM and ISDBT
>>>
>>> Sorry if I sent the patch improperly.
>>>
>>> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>>>
>>>
>>>
>>> diff --git a/media/video/cx23885/cx23885-cards.c b/media/video/cx23885/cx23885-cards.c
>>> index 080e111..17e2576 100644
>>> --- a/media/video/cx23885/cx23885-cards.c
>>> +++ b/media/video/cx23885/cx23885-cards.c
>> Wrong format... the "drivers/" is missing.
>>
>> Well, the location also changed to drivers/media/pci, but my scripts can
>> fix it.
>>
>>> @@ -541,11 +541,13 @@ struct cx23885_board cx23885_boards[] = {
>>> {
>>> .type = CX23885_VMUX_COMPOSITE1,
>>> .vmux = CX25840_COMPOSITE8,
>>> + .amux = CX25840_AUDIO7,
>> Didn't apply well. It seems it conflicted with some other patch.
>>
>> Please, re-generate it against the very latest tree.
>>
>> Also, when doing diffs for the boards entries, it is wise to have
>> more context lines, in order that a patch made for one driver would
>> be badly applied at some other board entry.
>>
>> The easiest way to do that is to do:
>>
>> $ git diff -U10
>> or
>> $ git show -U10
>> (if you've merged the patch at your local copy)
>>
>> (if you're generating the patch against the main media-tree.git)
>>
>> Where "10" is just an arbitrary large number that will allow to
>> see the board name that will be modified, like:
>>
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -531,20 +531,21 @@ struct cx23885_board cx23885_boards[] = {
>> .name = "Mygica X8507",
>> .tuner_type = TUNER_XC5000,
>> .tuner_addr = 0x61,
>> .tuner_bus = 1,
>> .porta = CX23885_ANALOG_VIDEO,
>> .input = {
>> {
>> .type = CX23885_VMUX_TELEVISION,
>> .vmux = CX25840_COMPOSITE2,
>> .amux = CX25840_AUDIO8,
>> + /* Some foo addition - just for testing */
>> },
>> {
>> .type = CX23885_VMUX_COMPOSITE1,
>> .vmux = CX25840_COMPOSITE8,
>> },
>> {
>> .type = CX23885_VMUX_SVIDEO,
>> .vmux = CX25840_SVIDEO_LUMA3 |
>> CX25840_SVIDEO_CHROMA4,
>> },
>>
>>
>> Thanks,
>> Mauro
> Hi
>
> Thanks for the advice.
>
> I resubmit the patch with the advice given.
> I apologize, but git and diff, still " aren't my friends"
>
> Thanks
>
>
> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
> index d889bd2..cb5f847 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -530,42 +530,45 @@ struct cx23885_board cx23885_boards[] = {
> [CX23885_BOARD_MYGICA_X8507] = {
> .name = "Mygica X8507",
> .tuner_type = TUNER_XC5000,
> .tuner_addr = 0x61,
> .tuner_bus = 1,
> .porta = CX23885_ANALOG_VIDEO,
> .input = {
> {
> .type = CX23885_VMUX_TELEVISION,
> .vmux = CX25840_COMPOSITE2,
> .amux = CX25840_AUDIO8,
> },
> {
> .type = CX23885_VMUX_COMPOSITE1,
> .vmux = CX25840_COMPOSITE8,
> + .amux = CX25840_AUDIO7,
> },
> {
> .type = CX23885_VMUX_SVIDEO,
> .vmux = CX25840_SVIDEO_LUMA3 |
> CX25840_SVIDEO_CHROMA4,
It seems that your emailer is not your friend too - it broke your patch ;)
Please, be sure to not let your email break long lines like that, or the
patch won't apply.
IMO, the better is to submit patches with git send-email. There are some examples
at git-send-email manpage on how to use it with an smart host, if your sendmail
is not configured for that.
Regards,
Mauro.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video
2012-09-19 16:28 ` Mauro Carvalho Chehab
@ 2012-09-21 14:33 ` Alfredo Jesús Delaiti
0 siblings, 0 replies; 5+ messages in thread
From: Alfredo Jesús Delaiti @ 2012-09-21 14:33 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: linux-media
Hi
El 19/09/12 13:28, Mauro Carvalho Chehab escribió:
> Em 19-09-2012 10:31, Alfredo Jesús Delaiti escreveu:
>> El 18/09/12 13:16, Mauro Carvalho Chehab escribió:
>>> Em 03-09-2012 17:14, Alfredo Jesús Delaiti escreveu:
>>>> Hi
>>>>
>>>> This patch add audio support for input YPbPr, AV and S-Video for Mygica X8507 card.
>>>> I tried it with the 3.4 and 3.5 kernel
>>>>
>>>> Remains to be done: IR, FM and ISDBT
>>>>
>>>> Sorry if I sent the patch improperly.
>>>>
>>>> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>>>>
....
>>
>> I resubmit the patch with the advice given.
>> I apologize, but git and diff, still " aren't my friends"
>>
>> Thanks
>>
>>
>> Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
>> index d889bd2..cb5f847 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -530,42 +530,45 @@ struct cx23885_board cx23885_boards[] = {
>> [CX23885_BOARD_MYGICA_X8507] = {
>> .name = "Mygica X8507",
>> .tuner_type = TUNER_XC5000,
>> .tuner_addr = 0x61,
>> .tuner_bus = 1,
>> .porta = CX23885_ANALOG_VIDEO,
>> .input = {
>> {
>> .type = CX23885_VMUX_TELEVISION,
>> .vmux = CX25840_COMPOSITE2,
>> .amux = CX25840_AUDIO8,
>> },
>> {
>> .type = CX23885_VMUX_COMPOSITE1,
>> .vmux = CX25840_COMPOSITE8,
>> + .amux = CX25840_AUDIO7,
>> },
>> {
>> .type = CX23885_VMUX_SVIDEO,
>> .vmux = CX25840_SVIDEO_LUMA3 |
>> CX25840_SVIDEO_CHROMA4,
>
> It seems that your emailer is not your friend too - it broke your patch ;)
Grrr. You are right, mail setup is wron
I applied this change:/usr/src/linux/Documentation/email-clients.txt., again
I proved before send email and is ok.
>
> Please, be sure to not let your email break long lines like that, or the
> patch won't apply.
>
> IMO, the better is to submit patches with git send-email. There are some examples
> at git-send-email manpage on how to use it with an smart host, if your sendmail
> is not configured for that.
>
> Regards,
> Mauro.
>
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index d889bd2..cb5f847 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -530,42 +530,45 @@ struct cx23885_board cx23885_boards[] = {
[CX23885_BOARD_MYGICA_X8507] = {
.name = "Mygica X8507",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
.amux = CX25840_AUDIO8,
},
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
+ .amux = CX25840_AUDIO7,
},
{
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
+ .amux = CX25840_AUDIO7,
},
},
},
[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TEVII_S471] = {
.name = "TeVii S471",
.portb = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index 22f8e7f..fcb3f22 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -496,31 +496,32 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
dev->board == CX23885_BOARD_MYGICA_X8507) {
/* Select Analog TV */
if (INPUT(input)->type == CX23885_VMUX_TELEVISION)
cx23885_gpio_clear(dev, GPIO_0);
}
/* Tell the internal A/V decoder */
v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
INPUT(input)->vmux, 0, 0);
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
- (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_MYGICA_X8507)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
if (INPUT(input)->amux == CX25840_AUDIO7)
cx23885_flatiron_mux(dev, 1);
else if (INPUT(input)->amux == CX25840_AUDIO6)
cx23885_flatiron_mux(dev, 2);
}
return 0;
}
static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input)
{
--
Dona tu voz
http://www.voxforge.org/es
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-09-21 14:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-03 20:14 [PATCH] Mygica X8507 audio for YPbPr, AV and S-Video Alfredo Jesús Delaiti
2012-09-18 16:16 ` Mauro Carvalho Chehab
2012-09-19 13:31 ` Alfredo Jesús Delaiti
2012-09-19 16:28 ` Mauro Carvalho Chehab
2012-09-21 14:33 ` Alfredo Jesús Delaiti
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).