From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:40997 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750798Ab2LPVXL (ORCPT ); Sun, 16 Dec 2012 16:23:11 -0500 Message-ID: <50CE3BA0.5030503@iki.fi> Date: Sun, 16 Dec 2012 23:22:40 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Renato Gallo CC: linux-media@vger.kernel.org Subject: Re: cannot make this Asus my cinema-u3100miniplusv2 work under linux References: <8e9f16405c8583e35cb97bb7d7daef4b@unixproducts.com> <50CDDF9A.1080509@iki.fi> <50CE0AFA.9030308@iki.fi> <1af6a5408ee3ebccebc3885bba06fc69@unixproducts.com> <50CE3070.10309@iki.fi> <810ffd737b21a0f46e383a76dd4313a2@unixproducts.com> In-Reply-To: <810ffd737b21a0f46e383a76dd4313a2@unixproducts.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: That antenna is your problem. I will send that patch to the Kernel 3.8, but as I think it is maybe too late for 3.8 it will eventually go to the 3.9 which is out sometime near beginning of next summer. If you wish I add your name as reporter then reply. Otherwise case closed. Feedback from the better antenna could be nice too. Antti On 12/16/2012 11:16 PM, Renato Gallo wrote: > stock one that came with the device > > http://unixproducts.com/antenna.jpg > > > Il 16/12/2012 21:34 Antti Palosaari ha scritto: >> It is very likely weak signal issue as I said. What kind of antenna >> you are using? >> >> Antti >> >> >> On 12/16/2012 10:13 PM, Renato Gallo wrote: >>> i found it is a problem with kaffeine, with other programs i can lock a >>> signal but reception is very very sketchy (like in unviewable). >>> >>> GlovX xine-lib # dmesg |grep e4000 >>> GlovX xine-lib # dmesg |grep FC0012 >>> GlovX xine-lib # dmesg |grep FC0013 >>> [ 28.281685] fc0013: Fitipower FC0013 successfully attached. >>> GlovX xine-lib # dmesg |grep FC2580 >>> GlovX xine-lib # dmesg |grep TUA >>> GlovX xine-lib # >>> >>> >>> Il 16/12/2012 18:55 Antti Palosaari ha scritto: >>>> On 12/16/2012 07:15 PM, Renato Gallo wrote: >>>>> now the modules loads and kaffeine recognizes the device but i cannot >>>>> find any channels. >>>>> can it be a tuner bug ? >>>> >>>> I think it is bad antenna / weak signal. Try w_scan, scan, tzap. >>>> >>>> Could you say which RF-tuner it finds from your device? use dmesg to >>>> dump output. It could be for example e4000, FC0012, FC0013, FC2580, >>>> TUA9001 etc. >>>> >>>> Antti >>>> >>>>> >>>>> >>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 0 pid = 0 >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 2 pid = 17 >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 4 pid = 16 >>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 0 pid = 0 >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 2 pid = 17 >>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>> section; >>>>> type = 4 pid = 16 >>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>> >>>>> >>>>> Il 16/12/2012 15:50 Antti Palosaari ha scritto: >>>>>> On 12/16/2012 04:23 PM, Renato Gallo wrote: >>>>>>> any news on this ? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Asus my cinema-u3100miniplusv2 >>>>>>> >>>>>>> Bus 001 Device 015: ID 1b80:d3a8 Afatech >>>>>>> >>>>>>> [ 6956.333440] usb 1-6.3.6: new high-speed USB device number 16 >>>>>>> using >>>>>>> ehci_hcd >>>>>>> [ 6956.453943] usb 1-6.3.6: New USB device found, idVendor=1b80, >>>>>>> idProduct=d3a8 >>>>>>> [ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1, >>>>>>> Product=2, >>>>>>> SerialNumber=0 >>>>>>> [ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB >>>>>>> [ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek >>>>>>> >>>>>> >>>>>> Seems to be Realtek RTL2832U. Add that USB ID to the driver and test. >>>>>> It is very high probability it starts working. >>>>>> >>>>>> Here is the patch: >>>>>> >>>>>> >>>>>> >>>>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Please test and report. >>>>>> >>>>>> regards >>>>>> Antti >>>>> >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe >>>>> linux-media" in >>>>> the body of a message to majordomo@vger.kernel.org >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe >>> linux-media" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- http://palosaari.fi/