From: Antti Palosaari <crope@iki.fi>
To: Ondrej Zary <linux@rainbow-software.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>, linux-media@vger.kernel.org
Subject: Re: [PATCH 1/4] tda8290: Allow disabling I2C gate
Date: Mon, 21 Jan 2013 10:06:54 +0200 [thread overview]
Message-ID: <50FCF71E.4060909@iki.fi> (raw)
In-Reply-To: <1358716939-2133-2-git-send-email-linux@rainbow-software.org>
On 01/20/2013 11:22 PM, Ondrej Zary wrote:
> Allow disabling I2C gate handling by external configuration.
> This is required by cards that have all devices on a single I2C bus,
> like AverMedia A706.
My personal opinion is that I2C gate control should be disabled setting
callback to NULL (same for the other unwanted callbacks too). There is
checks for callback existence in DVB-core, it does not call callback if
it is NULL.
regards
Antti
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
> drivers/media/tuners/tda8290.c | 13 +++++++++++--
> drivers/media/tuners/tda8290.h | 1 +
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/tuners/tda8290.c b/drivers/media/tuners/tda8290.c
> index 8c48521..16dfbf2 100644
> --- a/drivers/media/tuners/tda8290.c
> +++ b/drivers/media/tuners/tda8290.c
> @@ -54,6 +54,7 @@ struct tda8290_priv {
> #define TDA18271 16
>
> struct tda827x_config cfg;
> + bool no_i2c_gate;
> };
>
> /*---------------------------------------------------------------------*/
> @@ -66,6 +67,9 @@ static int tda8290_i2c_bridge(struct dvb_frontend *fe, int close)
> unsigned char disable[2] = { 0x21, 0x00 };
> unsigned char *msg;
>
> + if (priv->no_i2c_gate)
> + return 0;
> +
> if (close) {
> msg = enable;
> tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
> @@ -88,6 +92,9 @@ static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close)
> unsigned char buf[3] = { 0x45, 0x01, 0x00 };
> unsigned char *msg;
>
> + if (priv->no_i2c_gate)
> + return 0;
> +
> if (close) {
> msg = enable;
> tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
> @@ -740,8 +747,10 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
> priv->i2c_props.addr = i2c_addr;
> priv->i2c_props.adap = i2c_adap;
> priv->i2c_props.name = "tda829x";
> - if (cfg)
> - priv->cfg.config = cfg->lna_cfg;
> + if (cfg) {
> + priv->cfg.config = cfg->lna_cfg;
> + priv->no_i2c_gate = cfg->no_i2c_gate;
> + }
>
> if (tda8290_probe(&priv->i2c_props) == 0) {
> priv->ver = TDA8290;
> diff --git a/drivers/media/tuners/tda8290.h b/drivers/media/tuners/tda8290.h
> index 7e288b2..9959cc8 100644
> --- a/drivers/media/tuners/tda8290.h
> +++ b/drivers/media/tuners/tda8290.h
> @@ -26,6 +26,7 @@ struct tda829x_config {
> unsigned int probe_tuner:1;
> #define TDA829X_PROBE_TUNER 0
> #define TDA829X_DONT_PROBE 1
> + unsigned int no_i2c_gate:1;
> };
>
> #if defined(CONFIG_MEDIA_TUNER_TDA8290) || (defined(CONFIG_MEDIA_TUNER_TDA8290_MODULE) && defined(MODULE))
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2013-01-21 8:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-20 21:22 [PATCH 0/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-01-20 21:22 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-01-21 8:06 ` Antti Palosaari [this message]
2013-01-21 8:18 ` Ondrej Zary
2013-01-21 9:06 ` Antti Palosaari
2013-01-21 18:28 ` Ondrej Zary
2013-01-23 17:31 ` Antti Palosaari
2013-01-20 21:22 ` [PATCH 2/4] tda8290: Allow custom std_map for tda18271 Ondrej Zary
2013-01-20 21:22 ` [PATCH 3/4] tuner-core: Change config from unsigned int to void * Ondrej Zary
2013-01-20 21:22 ` [PATCH 4/4] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM Ondrej Zary
2013-01-27 21:45 ` [PATCH 4/4 v2] " Ondrej Zary
-- strict thread matches above, loose matches on Subject: below --
2013-02-01 20:21 [PATCH v2 0/4] " Ondrej Zary
2013-02-01 20:21 ` [PATCH 1/4] tda8290: Allow disabling I2C gate Ondrej Zary
2013-02-04 2:19 ` Michael Krufky
2013-02-04 18:56 ` Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50FCF71E.4060909@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=linux@rainbow-software.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).