From: Gianluca Gennari <gennarone@gmail.com>
To: Antti Palosaari <crope@iki.fi>
Cc: Andre Heider <a.heider@gmail.com>,
Jose Alberto Reguero <jareguero@telefonica.net>,
LMML <linux-media@vger.kernel.org>
Subject: Re: af9035 test needed!
Date: Sat, 09 Feb 2013 15:17:50 +0100 [thread overview]
Message-ID: <51165A8E.10805@gmail.com> (raw)
In-Reply-To: <510ABD7F.6030200@iki.fi>
Il 31/01/2013 19:52, Antti Palosaari ha scritto:
> Jose, Gianluca,
>
> On 01/31/2013 08:40 PM, Andre Heider wrote:
>> Hey,
>>
>> On Thu, Jan 31, 2013 at 2:59 PM, Antti Palosaari <crope@iki.fi> wrote:
>>>> On Fri, Jan 11, 2013 at 7:38 PM, Antti Palosaari <crope@iki.fi> wrote:
>>>>>
>>>>> Could you test that (tda18218 & mxl5007t):
>>
>> only now I see you mentioned mxl5007t too, and with the same tree as I
>> used for my 'TerraTec Cinergy T Stick Dual RC (rev. 2)', a 'AVerMedia
>> HD Volar (A867)' with a mxl5007t (and an unkown rev) works too:
>>
>> usb 3-3.1.4: new high-speed USB device number 7 using xhci_hcd
>> usb 3-3.1.4: New USB device found, idVendor=07ca, idProduct=1867
>> usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> usb 3-3.1.4: Product: A867
>> usb 3-3.1.4: Manufacturer: AVerMedia TECHNOLOGIES, Inc
>> usb 3-3.1.4: SerialNumber: 0305770200261
>> usb 3-3.1.4: af9035_identify_state: prechip_version=00 chip_version=03
>> chip_type=3802
>
> Who one as able to test with non-working AF9035 + MxL5007T combination.
> Does it report different chip versions? Same firmware used?
Hi Antti,
I finally found a friend with the Avermedia A867 (AF9035 + MxL5007T) non
working revision (A867-DP7):
http://forum.ubuntu-it.org/viewtopic.php?f=9&t=516182&start=60#p4301226
Apparently, there is no difference in the log file about the chip version:
[ 90.047319] usb 1-1.3: New USB device found, idVendor=07ca,
idProduct=a867
[ 90.047325] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 90.047330] usb 1-1.3: Product: A867
[ 90.047334] usb 1-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc
[ 90.047337] usb 1-1.3: SerialNumber: 5037944035440
[ 90.142796] usbcore: registered new interface driver dvb_usb_af9035
[ 90.143779] usb 1-1.3: af9035_identify_state: prechip_version=00
chip_version=03 chip_type=3802
[ 90.144178] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar
(A867)' in cold state
[ 90.170437] usb 1-1.3: dvb_usb_v2: downloading firmware from file
'dvb-usb-af9035-02.fw'
[ 90.495461] usb 1-1.3: dvb_usb_af9035: firmware version=12.13.15.0
[ 90.495483] usb 1-1.3: dvb_usb_v2: found a 'AVerMedia HD Volar
(A867)' in warm state
[ 90.498004] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[ 90.498046] DVB: registering new adapter (AVerMedia HD Volar (A867))
[ 90.498401] DVB: register adapter0/demux0 @ minor: 0 (0x00)
[ 90.498476] DVB: register adapter0/dvr0 @ minor: 1 (0x01)
[ 90.498543] DVB: register adapter0/net0 @ minor: 2 (0x02)
[ 90.549788] i2c i2c-8: af9033: firmware version: LINK=12.13.15.0
OFDM=6.20.15.0
[ 90.549798] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech
AF9033 (DVB-T))...
[ 90.549903] DVB: register adapter0/frontend0 @ minor: 3 (0x03)
[ 90.913945] mxl5007t 8-0060: creating new instance
[ 90.929824] Registered IR keymap rc-empty
[ 90.929937] input: AVerMedia HD Volar (A867) as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input13
[ 90.930019] rc0: AVerMedia HD Volar (A867) as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
[ 90.930027] usb 1-1.3: dvb_usb_v2: schedule remote query interval to
500 msecs
[ 90.930032] usb 1-1.3: dvb_usb_v2: 'AVerMedia HD Volar (A867)'
successfully initialized and connected
Also, the stick works fine with Jose's patch, independently from the
firmware file used.
Regards,
Gianluca
>
>
>> usb 3-3.1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold
>> state
>> usb 3-3.1.4: dvb_usb_v2: downloading firmware from file
>> 'dvb-usb-af9035-02.fw'
>> usb 3-3.1.4: dvb_usb_af9035: firmware version=11.5.9.0
>> usb 3-3.1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm
>> state
>> usb 3-3.1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream
>> to the software demuxer
>> DVB: registering new adapter (AVerMedia HD Volar (A867))
>> i2c i2c-19: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
>> usb 3-3.1.4: DVB: registering adapter 1 frontend 0 (Afatech AF9033
>> (DVB-T))...
>> mxl5007t 19-0060: creating new instance
>> mxl5007t_get_chip_id: unknown rev (3f)
>> mxl5007t_get_chip_id: MxL5007T detected @ 19-0060
>> Registered IR keymap rc-empty
>> input: AVerMedia HD Volar (A867) as
>> /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/rc/rc5/input29
>> rc5: AVerMedia HD Volar (A867) as
>> /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/rc/rc5
>> usb 3-3.1.4: dvb_usb_v2: schedule remote query interval to 500 msecs
>> usb 3-3.1.4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully
>> initialized and connected
>
> regards
> Antti
>
next prev parent reply other threads:[~2013-02-09 14:17 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 18:38 af9035 test needed! Antti Palosaari
2013-01-11 23:45 ` Jose Alberto Reguero
2013-01-11 23:49 ` Antti Palosaari
2013-01-12 21:14 ` Jose Alberto Reguero
2013-01-13 20:19 ` Jose Alberto Reguero
2013-02-03 4:00 ` Michael Krufky
2013-02-03 12:04 ` Jose Alberto Reguero
2013-02-03 13:21 ` Antti Palosaari
2013-02-03 19:27 ` Michael Krufky
2013-02-03 19:36 ` Antti Palosaari
2013-02-03 19:53 ` Michael Krufky
2013-02-03 20:29 ` Antti Palosaari
2013-02-03 21:02 ` Michael Krufky
2013-01-18 9:11 ` Gianluca Gennari
2013-01-31 13:04 ` Andre Heider
2013-01-31 13:46 ` Michael Krufky
2013-02-07 12:45 ` Andre Heider
2013-01-31 13:59 ` Antti Palosaari
2013-01-31 17:38 ` Andre Heider
2013-01-31 18:40 ` Andre Heider
2013-01-31 18:52 ` Antti Palosaari
2013-02-09 14:17 ` Gianluca Gennari [this message]
2013-02-15 15:48 ` pierigno
2013-01-31 20:29 ` Malcolm Priestley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51165A8E.10805@gmail.com \
--to=gennarone@gmail.com \
--cc=a.heider@gmail.com \
--cc=crope@iki.fi \
--cc=jareguero@telefonica.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).