From: Antti Palosaari <crope@iki.fi>
To: LMML <linux-media@vger.kernel.org>
Subject: Re: [GIT PULL] IT913X
Date: Mon, 18 Mar 2013 23:04:17 +0200 [thread overview]
Message-ID: <51478151.5070702@iki.fi> (raw)
In-Reply-To: <51477002.2000605@iki.fi>
I rebased it as Mauro just committed some stuff that causes merge conflict!
Antti
On 03/18/2013 09:50 PM, Antti Palosaari wrote:
> That patch serie adds new silicon RF-tuner driver named IT913X and
> IT9135 support for existing AF9035/AF9033 drivers. IT913X driver is
> split out from the existing IT9135 driver.
>
> IT913X serie is successor of AF903X serie. Difference is integrated
> RF-tuner. Also those two letters has changed from AF to IT as Afatech
> was bought by ITE Tech.
>
> Logically there is three "chips", as always in case of DTV USB device:
> * USB-interface
> * demodulator
> * RF-tuner
>
> These are sold as following chip names and integrated combinations:
> * AF9032 = demodulator ?
> * AF9033 = demodulator
> * AF9035 = USB-interface + demodulator
> * IT9133 = demodulator + RF-tuner
> * IT9135 = USB-interface + demodulator + RF-tuner
> * IT9137 = IT9135 + MPEG TS input for connecting extra IT9133
>
>
> regards
> Antti
>
>
> The following changes since commit
> 4ca286610f664acf3153634f3930acd2de993a9f:
>
> [media] radio-rtrack2: fix mute bug (2013-03-05 15:20:07 -0300)
>
> are available in the git repository at:
>
> git://linuxtv.org/anttip/media_tree.git it9135_tuner
>
> for you to fetch changes up to 17f64e21efadad3da1744feec97a12d97df15765:
>
> MAINTAINERS: add drivers/media/tuners/it913x* (2013-03-10 03:58:13
> +0200)
>
> ----------------------------------------------------------------
> Antti Palosaari (41):
> ITE IT913X silicon tuner driver
> af9033: support for it913x tuners
> af9035: add support for 1st gen it9135
> af9035: add auto configuration heuristic for it9135
> af9035: fix af9033 demod sampling frequency
> af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)
> af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)
> af9035: constify clock tables
> af9035: USB1.1 support (== PID filters)
> af9035: merge af9035 and it9135 eeprom read routines
> af9035: basic support for IT9135 v2 chips
> af9033: IT9135 v2 supported related changes
> af9035: IT9135 dual tuner related changes
> it913x: merge it913x_fe_start() to it913x_init_tuner()
> it913x: merge it913x_fe_suspend() to it913x_fe_sleep()
> it913x: rename functions and variables
> it913x: tuner power up routines
> it913x: get rid of it913x config struct
> it913x: remove unused variables
> it913x: include tuner IDs from af9033.h
> it913x: use dev_foo() logging
> af9033: add IT9135 demod reg init tables
> it913x: remove demod init reg tables
> af9035: select firmware loader according to firmware
> af9035: use already detected eeprom base addr
> af9035: set demod TS mode config in read_config()
> af9035: enable remote controller for IT9135 too
> af9035: change dual mode boolean to bit field
> af9033: add IT9135 tuner config "38" init table
> af9033: add IT9135 tuner config "51" init table
> af9033: add IT9135 tuner config "52" init table
> af9033: add IT9135 tuner config "60" init table
> af9033: add IT9135 tuner config "61" init table
> af9033: add IT9135 tuner config "62" init table
> it913x: remove unused af9033 demod tuner config inits
> af9033: move code from it913x to af9033
> af9033: sleep on attach()
> af9033: implement i/o optimized reg table writer
> af9035: check I/O errors on IR polling
> af9035: style changes for remote controller polling
> MAINTAINERS: add drivers/media/tuners/it913x*
>
> MAINTAINERS | 10 +
> drivers/media/dvb-frontends/af9033.c | 138 ++++++++++---
> drivers/media/dvb-frontends/af9033.h | 15 ++
> drivers/media/dvb-frontends/af9033_priv.h | 1506
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>
> drivers/media/tuners/Kconfig | 7 +
> drivers/media/tuners/Makefile | 1 +
> drivers/media/tuners/it913x.c | 447
> ++++++++++++++++++++++++++++++++++++++++
> drivers/media/tuners/it913x.h | 45 ++++
> drivers/media/tuners/it913x_priv.h | 78 +++++++
> drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
> drivers/media/usb/dvb-usb-v2/af9015.c | 40 +++-
> drivers/media/usb/dvb-usb-v2/af9035.c | 545
> ++++++++++++++++++++++++++++++++-----------------
> drivers/media/usb/dvb-usb-v2/af9035.h | 47 +++--
> 13 files changed, 2654 insertions(+), 226 deletions(-)
> create mode 100644 drivers/media/tuners/it913x.c
> create mode 100644 drivers/media/tuners/it913x.h
> create mode 100644 drivers/media/tuners/it913x_priv.h
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2013-03-18 21:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 19:50 [GIT PULL] IT913X Antti Palosaari
2013-03-18 21:04 ` Antti Palosaari [this message]
2013-03-18 22:42 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51478151.5070702@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).