From: Oliver Schinagl <oliver+list@schinagl.nl>
To: Jan Saris <jan.saris@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: No Signal with TerraTec Cinergy T PCIe dual
Date: Mon, 08 Apr 2013 19:58:29 +0200 [thread overview]
Message-ID: <51630545.7060403@schinagl.nl> (raw)
In-Reply-To: <CAK2FuSnprxO78R1u6mSVXJX7WQ0Q_nnr+3vkW7x_y2YuYwHR9Q@mail.gmail.com>
On 09-04-13 10:47, Jan Saris wrote:
> Hi,
>
> Thanks for your reply,
> Do you only use DVB-T, or also DVB-C? Because it looks to me that
> DVB-C isn't implemented, or at least giving me a lot of errors?
>
> I use the correct front-end of adapter2 (as you can see in the log:
> DELIVERY_SYSTEM = DVBC/ANNEX_A)
> adapter1 is only DVB-T
I watch via DVB-T so I always have to set that to my second tuner (to
have dual tuner possibility).
dvb-fe-tool -a 0 -d DVB-T
dvb-fe-tool -a 1 -d DVB-T
for adapter 0 and 1.
In your case however, you do not use DVB-T. The first tuner thus is
useless (It can only function as Analog tuner, but I have no idea what
the status for that is atm), I can't 'choose' it as delivery system.
As for adapter 1, You can swap between DVBT, DVBC/ANNEX_A and
DVBC/ANNEX_C. So that's DVBT and DVBC, but two flavors. I don't know
what it means, but you can try switching between those two?
dvb-fe-tool -a 1 -d DVBC/ANNEX_C
Give it a shot :)
>
> What do you meen by: "Remember to set the frontend properly;
> dvb-fe-tool from memory"??
> To set the delevery system to DVB-C before running the dvbv5-scan??
>
> Jan
>
> 2013/4/7 Oliver Schinagl <oliver+list@schinagl.nl>:
>> On 07-04-13 12:56, Jan Saris wrote:
>>> Hi,
>>>
>>> Sinse a couple of months I'm trying to get my second DVB-C card to
>>> work, but with no luck.
>>> I have searched a lot around and even tried the last media_build.
>> I have the same card and while I don't see anything wrong (you have 2 dvb-t
>> devices installed right? adapter0 is something else, and the Cinergy is
>> adapter1 and adapter2? Ah, yes you do say 'other dvb-c' sorry.
>>
>>> I am running linux 3.5.0-26-generic with the latests media_build from
>>> here (http://git.linuxtv.org/media_build.git)
>>>
>>> For some reason the card won't get a lock. Here are my test results:
>> Remember to set the frontend properly; dvb-fe-tool from memory (tab
>> completion ftw). And remember the cinergy is dual dvb-t; but only single
>> dvb-c (and single analog, but i think that is still not implemented?)
>>>
>>> Terratec Cinergy PCIe Dual
>>> dvbv5-scan -a2 -v channel2.conf
>>> using demux '/dev/dvb/adapter2/demux0'
>>> Device DRXK DVB-C DVB-T (/dev/dvb/adapter2/frontend0) capabilities:
>>> CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6 CAN_FEC_7_8
>>> CAN_FEC_AUTO CAN_GUARD_INTERVAL_AUTO CAN_HIERARCHY_AUTO
>>> CAN_INVERSION_AUTO CAN_MUTE_TS CAN_QAM_16 CAN_QAM_32 CAN_QAM_64
>>> CAN_QAM_128 CAN_QAM_256 CAN_RECOVER CAN_TRANSMISSION_MODE_AUTO
>>> DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A
>>> Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C DVBT
>>> Scanning frequency #1 304000000
>>> FREQUENCY = 304000000
>>> MODULATION = QAM/64
>>> INVERSION = AUTO
>>> SYMBOL_RATE = 6875000
>>> INNER_FEC = AUTO
>>> DELIVERY_SYSTEM = DVBC/ANNEX_A
>>> status 00 | signal 0% | snr 0% | ber 0 | unc 119 | tune failed
>>> dmesg
>>> [ 5.332360] cx23885_dvb_register() allocating 1 frontend(s)
>>> [ 5.332365] cx23885[0]: cx23885 based dvb card
>>> [ 5.365162] drxk: status = 0x639160d9
>>> [ 5.365167] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz
>>> [ 5.465869] DRXK driver version 0.9.4300
>>> [ 5.504139] drxk: frontend initialized.
>>> [ 5.517782] mt2063_attach: Attaching MT2063
>>> [ 5.517788] DVB: registering new adapter (cx23885[0])
>>> [ 5.517791] DVB: registering adapter 1 frontend 0 (DRXK DVB-T)...
>>> [ 5.518664] cx23885_dvb_register() allocating 1 frontend(s)
>>> [ 5.518668] cx23885[0]: cx23885 based dvb card
>>> [ 5.533886] drxk: status = 0x639130d9
>>> [ 5.533896] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz
>>> [ 5.617338] DRXK driver version 0.9.4300
>>> [ 5.650861] drxk: frontend initialized.
>>> [ 5.650872] mt2063_attach: Attaching MT2063
>>> [ 5.650876] DVB: registering new adapter (cx23885[0])
>>> [ 5.650878] DVB: registering adapter 2 frontend 0 (DRXK DVB-C DVB-T)...
>>> [ 5.651338] cx23885_dev_checkrevision() Hardware revision = 0xa5
>>> [ 5.651343] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16,
>>> latency: 0, mmio: 0xff400000
>>> ........
>>> [ 153.727978] mt2063: detected a mt2063 B3
>>> [ 153.877050] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 153.877058] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>> [ 156.989702] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 156.989710] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>> [ 170.558420] mt2063: detected a mt2063 B3
>>> [ 170.629422] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 170.629430] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>> [ 173.742057] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 173.742065] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>> [ 251.314900] mt2063: detected a mt2063 B3
>>> [ 251.385932] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 251.385940] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>> [ 254.498522] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with
>>> params:
>>> [ 254.498530] drxk: 02 00 00 00 10 00 05 00 03 02
>>> ..........
>>>
>>> lspci -vvv
>>> 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
>>> PCI Video and Audio Decoder (rev 04)
>>> Subsystem: TERRATEC Electronic GmbH Cinergy T PCIe Dual
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0, Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 16
>>> Region 0: Memory at ff400000 (64-bit, non-prefetchable) [size=2M]
>>> Capabilities: [40] Express (v1) Endpoint, MSI 00
>>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
>>> <64ns, L1 <1us
>>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>>> Unsupported-
>>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>>> AuxPwr- TransPend-
>>> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
>>> Latency L0 <2us, L1 <4us
>>> ClockPM- Surprise- LLActRep- BwNot-
>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>>> CommClk+
>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>>> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>>> Capabilities: [80] Power Management version 2
>>> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
>>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>> Capabilities: [90] Vital Product Data
>>> Product Name: "
>>> End
>>> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>>> Address: 0000000000000000 Data: 0000
>>> Capabilities: [100 v1] Advanced Error Reporting
>>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
>>> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>>> NonFatalErr-
>>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>>> NonFatalErr-
>>> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
>>> ChkEn-
>>> Capabilities: [200 v1] Virtual Channel
>>> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
>>> Arb: Fixed+ WRR32+ WRR64+ WRR128-
>>> Ctrl: ArbSelect=WRR64
>>> Status: InProgress-
>>> Port Arbitration Table [240] <?>
>>> VC0: Caps: PATOffset=00 MaxTimeSlots=1
>>> RejSnoopTrans-
>>> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
>>> WRR256-
>>> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>>> Status: NegoPending- InProgress-
>>> Kernel driver in use: cx23885
>>> Kernel modules: cx23885
>>>
>>> It says no signal, but if I put the antenna-cable in my other DVB-C
>>> card and do a scan I get:
>>> Philips TV-Card
>>> dvbv5-scan -a0 -v channel2.conf
>>> using demux '/dev/dvb/adapter0/demux0'
>>> Device Philips TDA10023 DVB-C (/dev/dvb/adapter0/frontend0) capabilities:
>>> CAN_FEC_AUTO CAN_INVERSION_AUTO CAN_QAM_16 CAN_QAM_32
>>> CAN_QAM_64 CAN_QAM_128 CAN_QAM_256 CAN_QPSK
>>> DVB API Version 5.6, Current v5 delivery system: DVBC/ANNEX_A
>>> Supported delivery systems: [DVBC/ANNEX_A] DVBC/ANNEX_C
>>> Scanning frequency #1 304000000
>>> FREQUENCY = 304000000
>>> MODULATION = QAM/64
>>> INVERSION = AUTO
>>> SYMBOL_RATE = 6875000
>>> INNER_FEC = AUTO
>>> DELIVERY_SYSTEM = DVBC/ANNEX_A
>>> status 1f | signal 97% | snr 94% | ber 1728 | unc 62194 | FE_HAS_LOCK
>>>
>>> Service #0 (101) Nederland 1 channel 0.1.0
>>> Service #1 (102) Nederland 2 channel 0.2.1
>>> Service #2 (103) Nederland 3 channel 0.3.2
>>> Service #3 (8101) 100%NL channel 0.801.3
>>> Service #4 (8102) Arrow Classic Rock channel 0.802.4
>>> Service #5 (8103) Arrow Jazz channel 0.803.5
>>> Service #6 (8104) BBC radio 1 channel 0.804.6
>>> Service #7 (8105) BBC radio 2 channel 0.805.7
>>> Service #8 (8106) BBC radio 3 channel 0.806.8
>>> Service #9 (8107) BBC radio 4 channel 0.807.9
>>> Service #10 (8108) BNR channel 0.808.10
>>> Service #11 (8109) Classic FM channel 0.809.11
>>> New transponder/channel found: #2: 505937920
>>> New transponder/channel found: #3: 515112960
>>> New transponder/channel found: #4: 524288000
>>> New transponder/channel found: #5: 529530880
>>> New transponder/channel found: #6: 538705920
>>> New transponder/channel found: #7: 547880960
>>> New transponder/channel found: #8: 557056000
>>> New transponder/channel found: #9: 566231040
>>> New transponder/channel found: #10: 312000000
>>> New transponder/channel found: #11: 320000000
>>> New transponder/channel found: #12: 328000000
>>> New transponder/channel found: #13: 336000000
>>> New transponder/channel found: #14: 580648960
>>> New transponder/channel found: #15: 344000000
>>> New transponder/channel found: #16: 352000000
>>> New transponder/channel found: #17: 360000000
>>> New transponder/channel found: #18: 368000000
>>>
>>> Does anyone know what I'm doing wrong?
>>> Thanks,
>>>
>>> Jan Saris
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-04-09 10:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-07 10:56 No Signal with TerraTec Cinergy T PCIe dual Jan Saris
2013-04-07 15:42 ` Oliver Schinagl
2013-04-09 8:47 ` Jan Saris
2013-04-08 17:58 ` Oliver Schinagl [this message]
2013-04-09 9:31 ` Cédric Girard
-- strict thread matches above, loose matches on Subject: below --
2013-01-08 21:02 Cédric Girard
2013-01-08 21:46 ` Antti Palosaari
2013-01-08 22:10 ` Cédric Girard
2013-03-06 14:28 ` Cédric Girard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51630545.7060403@schinagl.nl \
--to=oliver+list@schinagl.nl \
--cc=jan.saris@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).