From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:52598 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752066Ab3DLAMX (ORCPT ); Thu, 11 Apr 2013 20:12:23 -0400 Message-ID: <5167513D.60804@iki.fi> Date: Fri, 12 Apr 2013 03:11:41 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Hans Verkuil , LMML Subject: Keene Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello Hans, That device is working very, thank you for it. Anyhow, I noticed two things. 1) it does not start transmitting just after I plug it - I have to retune it! Output says it is tuned to 95.160000 MHz by default, but it is not. After I issue retune, just to same channel it starts working. $ v4l2-ctl -d /dev/radio0 --set-freq=95.16 2) What is that log printing? ALSA sound/usb/mixer.c:932 13:0: cannot get min/max values for control 2 (id 13) usb 5-2: new full-speed USB device number 3 using ohci_hcd usb 5-2: New USB device found, idVendor=046d, idProduct=0a0e usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: B-LINK USB Audio usb 5-2: Manufacturer: HOLTEK ALSA sound/usb/mixer.c:932 13:0: cannot get min/max values for control 2 (id 13) radio-keene 5-2:1.2: V4L2 device registered as radio0 $ v4l2-ctl -d /dev/radio0 --all -L Driver Info (not using libv4l2): Driver name : radio-keene Card type : Keene FM Transmitter Bus info : usb-0000:00:13.0-2 Driver version: 3.9.0 Capabilities : 0x800C0000 Modulator Radio Frequency: 1522560 (95.160000 MHz) Modulator: Name : FM Capabilities : 62.5 Hz stereo Frequency range : 76.0 MHz - 108.0 MHz Subchannel modulation: stereo Priority: 2 User Controls mute (bool) : default=0 value=0 FM Radio Modulator Controls audio_compression_gain (int) : min=-15 max=18 step=3 default=0 value=0 flags=slider pre_emphasis (menu) : min=0 max=2 default=1 value=1 1: 50 Microseconds 2: 75 Microseconds tune_power_level (int) : min=84 max=118 step=1 default=118 value=118 flags=slider regards Antti -- http://palosaari.fi/