From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
mchehab@redhat.com, linux-media@vger.kernel.org,
magnus.damm@gmail.com, linux-sh@vger.kernel.org,
phil.edworthy@renesas.com, matsu@igel.co.jp
Subject: Re: [PATCH v4] V4L2: soc_camera: Renesas R-Car VIN driver
Date: Wed, 15 May 2013 23:03:29 +0300 [thread overview]
Message-ID: <5193EA11.7080705@cogentembedded.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1305150742470.10596@axis700.grange>
Hi Guennadi,
On 05/15/2013 08:44 AM, Guennadi Liakhovetski wrote:
> Hi Sergei, Vladimir
>
> On Wed, 15 May 2013, Sergei Shtylyov wrote:
>
>> From: Vladimir Barinov<vladimir.barinov@cogentembedded.com>
>>
>> Add Renesas R-Car VIN (Video In) V4L2 driver.
>>
>> Based on the patch by Phil Edworthy<phil.edworthy@renesas.com>.
>>
>> Signed-off-by: Vladimir Barinov<vladimir.barinov@cogentembedded.com>
>> [Sergei: removed deprecated IRQF_DISABLED flag, reordered/renamed 'enum chip_id'
>> values, reordered rcar_vin_id_table[] entries, removed senseless parens from
>> to_buf_list() macro, used ALIGN() macro in rcar_vin_setup(), added {} to the
>> *if* statement and used 'bool' values instead of 0/1 where necessary, done
>> some reformatting and clarified some comments.]
>> Signed-off-by: Sergei Shtylyov<sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> This patch is against the 'media_tree.git' repo.
>>
>> Changes since version 3:
> Why aren't you using this:
>
> http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/63820
>
> ?
I've just figured out that missed this part of your review.
Please take my apologies for this and let me quickly rework it.
Regards,
Vladimir
>
> Thanks
> Guennadi
>
>> - removed the driver's dependency on R-Car M1A/H1 SoCs from Kconfig;
>> - made the driver aware of the differences between R-Car E1/M1/H1 SoCs by having
>> different platform device IDs for different SoCs, introcduced 'enum chips_id'
>> to be used as the 'driver_data' field of 'struct platform_device_id' and then
>> copied to the 'chip' field of 'struct rcar_vin_priv';
>> - sorted #include's alphabetically, added a number of #includes<media/v4l2-*>;
>> - removed the 'data_through' field of the 'struct rcar_vin_priv' and the pass-
>> through logic from set_fmt() method;
>> - simplified is_continuous_transfer(), used it where applicable;
>> - removed senseless parens from to_buf_list() macro;
>> - removed the 'code' field from the 'struct rcar_vin_cam';
>> - largely rewrote the queue_setup() method;
>> - removed 'input_is_yuv' variable from rcar_vin_setup(), made 'progressive' and
>> 'output_is_yuv' variables 'bool', and made setting VnDMR.EXRGB bit only happen
>> on R-Car E1/H1 there;
>> - made use of ALIGN() macro in rcar_vin_setup() and rcar_vin_set_rect();
>> - fixed missing {} on one branch of the *if* statement in several places, added
>> {} to the *if* statement where necessary;
>> - stopped saving/restoring flags when grabbing/dropping a spinlock in the
>> buf_queue() and buf_cleanup() methods;
>> - made 'dsize' variable calculation depend on R-Car E1 in rcar_vin_set_rect()
>> - fix the continuous capturing to stop when there is no buffer to be set into
>> the VnMBm registers in rcar_vin_irq();
>> - replaced BUG_ON() with WARN_ON() and *return* in the remove() method, also
>> replaced pm_runtime_put_sync() with pm_runtime_put() there;
>> - removed size_dst() and calc_scale() as the calls to calc_scale() were also
>> removed from the set_fmt() method;
>> - removed the VnMC register value check from capture_restore();
>> - removed 'cfg' variable initializers from set_bus_param() method and
>> rcar_vin_try_bus_param();
>> - added bus width check to rcar_vin_try_bus_param();
>> - removed V4L2_PIX_FMT_YUYV format from rcar_vin_formats[], initialize 'layout'
>> field of every element in this table;
>> - changed dev_err() call and *return* -EINVAL to dev_warn() and *return* 0 in
>> the get_formats() method,
>> - added rcar_vin_packing_supported() and started handling pass-through mode in
>> the get_formats() method;
>> - constified the parameters of is_smaller() and is_inside();
>> - redid the scaling logic so that it can't scale RGB32 data on R-Car E1 in the
>> set_fmt() method, also stopped assigning to 'cam->code' there;
>> - started selecting the current format if soc_camera_xlate_by_fourcc() call
>> failed in the try_fmt() method, also started letting 'soc-camera' calculate
>> bytes-per-line and image size there;
>> - removed pm_runtime_resume() call from the driver's probe() method
>> - added setting of the 'timestamp_type' field to the init_videobuf2() method.
>>
>> Changes since version 2:
>> - replaced Cyrillic characters in comments with the proper Latinic ones.
>>
>> Changes since the original posting:
>> - added IRQF_SHARED flag in devm_request_irq() call (since on R8A7778 VIN0/1
>> share the same IRQ) and removed deprecated IRQF_DISABLED flag.
>>
>> drivers/media/platform/soc_camera/Kconfig | 7
>> drivers/media/platform/soc_camera/Makefile | 1
>> drivers/media/platform/soc_camera/rcar_vin.c | 1814 +++++++++++++++++++++++++++
>> include/linux/platform_data/camera-rcar.h | 25
>> 4 files changed, 1847 insertions(+)
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
next prev parent reply other threads:[~2013-05-15 20:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-14 22:56 [PATCH v4] V4L2: soc_camera: Renesas R-Car VIN driver Sergei Shtylyov
2013-05-15 5:44 ` Guennadi Liakhovetski
2013-05-15 20:03 ` Vladimir Barinov [this message]
2013-05-17 20:53 ` Sergei Shtylyov
2013-05-17 21:04 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5193EA11.7080705@cogentembedded.com \
--to=vladimir.barinov@cogentembedded.com \
--cc=g.liakhovetski@gmx.de \
--cc=linux-media@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=matsu@igel.co.jp \
--cc=mchehab@redhat.com \
--cc=phil.edworthy@renesas.com \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox