All models of Technotrend TT-connect CT-3650 are not supported

All models of Technotrend TT-connect CT-3650 are not supported

[Jussi Jääskeläinen]

Older models have: idVendor=0b48, idProduct=300d
Model what I just bought was: idVendor=04b4, idProduct=8613 and this is not 
supported!

usb 2-1: New USB device found, idVendor=04b4, idProduct=8613
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbtest 2-1:1.0: FX2 device
usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt)

Both products looks just same!

Re: All models of Technotrend TT-connect CT-3650 are not supported

[Jussi Jääskeläinen]

Jussi Jääskeläinen <www.linuxtv.org <at> jjussi.com> writes:

> Older models have: idVendor=0b48, idProduct=300d
> Model what I just bought was: idVendor=04b4, idProduct=8613 and this is not 
> supported!
> 
> usb 2-1: New USB device found, idVendor=04b4, idProduct=8613
> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> usbtest 2-1:1.0: FX2 device
> usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
> 
> Both products looks just same!

Is there some program I could run what would "extract" all needed information 
to developer, so driver could be created or known driver could be connected to 
this ID?

-- JJussi

Re: All models of Technotrend TT-connect CT-3650 are not supported

[Antti Palosaari]

On 05/31/2013 08:53 AM, Jussi Jääskeläinen wrote:
> Jussi Jääskeläinen <www.linuxtv.org <at> jjussi.com> writes:
>
>> Older models have: idVendor=0b48, idProduct=300d
>> Model what I just bought was: idVendor=04b4, idProduct=8613 and this is not
>> supported!
>>
>> usb 2-1: New USB device found, idVendor=04b4, idProduct=8613
>> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>> usbtest 2-1:1.0: FX2 device
>> usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
>>
>> Both products looks just same!
>
> Is there some program I could run what would "extract" all needed information
> to developer, so driver could be created or known driver could be connected to
> this ID?

Your device eeprom is corrupted or eeprom is broken or connection to 
eeprom is broken. 04b4:8613 is Cypress FX2 default USB ID. It tries to 
download USB ID (also firmware in some cases) from the eeprom first and 
after that enumerates to the USB bus.

That device will not even work on Windows. Return it to the warranty.

regards
Antti

-- 
http://palosaari.fi/

Re: All models of Technotrend TT-connect CT-3650 are not supported

[Jussi Jaaskelainen]

On 3.6.2013 0.28, Antti Palosaari wrote:
> On 05/31/2013 08:53 AM, Jussi Jääskeläinen wrote:
>> Jussi Jääskeläinen <www.linuxtv.org <at> jjussi.com> writes:
>>
>>> Older models have: idVendor=0b48, idProduct=300d
>>> Model what I just bought was: idVendor=04b4, idProduct=8613 and this 
>>> is not
>>> supported!
>>>
>>> usb 2-1: New USB device found, idVendor=04b4, idProduct=8613
>>> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>> usbtest 2-1:1.0: FX2 device
>>> usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
>>>
>>> Both products looks just same!
>>
>> Is there some program I could run what would "extract" all needed 
>> information
>> to developer, so driver could be created or known driver could be 
>> connected to
>> this ID?
>
> Your device eeprom is corrupted or eeprom is broken or connection to 
> eeprom is broken. 04b4:8613 is Cypress FX2 default USB ID. It tries to 
> download USB ID (also firmware in some cases) from the eeprom first 
> and after that enumerates to the USB bus.
>
> That device will not even work on Windows. Return it to the warranty.
>
> regards
> Antti
>
Yes. I think you are right..
I managed to get windows machine and installed needed software there.. 
It didn't find that USB device.. Then I connect my old CT-3650 to that 
cable and everything worked fine..
Problem is that I bought it from germany (DVBShop.net) and now I need 
"discuss" with them what we shall do it.. ;-)

-- 
JJussi