From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from jjussi.vpslink.com ([64.150.161.61]:34078 "EHLO mail.jjussi.com" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1756101Ab3FCNdh (ORCPT ); Mon, 3 Jun 2013 09:33:37 -0400 Received: from [192.168.192.149] (Jussin-DELL.jjussi.com [192.168.192.149]) by mail.jjussi.com (Postfix) with ESMTP id E2E4338102 for ; Mon, 3 Jun 2013 09:33:36 -0400 (EDT) Message-ID: <51AC9B0E.5030603@jjussi.com> Date: Mon, 03 Jun 2013 16:33:02 +0300 From: Jussi Jaaskelainen MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Re: All models of Technotrend TT-connect CT-3650 are not supported References: <51ABB8F3.1060103@iki.fi> In-Reply-To: <51ABB8F3.1060103@iki.fi> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: On 3.6.2013 0.28, Antti Palosaari wrote: > On 05/31/2013 08:53 AM, Jussi Jääskeläinen wrote: >> Jussi Jääskeläinen jjussi.com> writes: >> >>> Older models have: idVendor=0b48, idProduct=300d >>> Model what I just bought was: idVendor=04b4, idProduct=8613 and this >>> is not >>> supported! >>> >>> usb 2-1: New USB device found, idVendor=04b4, idProduct=8613 >>> usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >>> usbtest 2-1:1.0: FX2 device >>> usbtest 2-1:1.0: high-speed {control bulk-in bulk-out} tests (+alt) >>> >>> Both products looks just same! >> >> Is there some program I could run what would "extract" all needed >> information >> to developer, so driver could be created or known driver could be >> connected to >> this ID? > > Your device eeprom is corrupted or eeprom is broken or connection to > eeprom is broken. 04b4:8613 is Cypress FX2 default USB ID. It tries to > download USB ID (also firmware in some cases) from the eeprom first > and after that enumerates to the USB bus. > > That device will not even work on Windows. Return it to the warranty. > > regards > Antti > Yes. I think you are right.. I managed to get windows machine and installed needed software there.. It didn't find that USB device.. Then I connect my old CT-3650 to that cable and everything worked fine.. Problem is that I bought it from germany (DVBShop.net) and now I need "discuss" with them what we shall do it.. ;-) -- JJussi