From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:58180 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754363Ab3FJRsa (ORCPT ); Mon, 10 Jun 2013 13:48:30 -0400 Message-ID: <51B61143.3080307@iki.fi> Date: Mon, 10 Jun 2013 20:47:47 +0300 From: Antti Palosaari MIME-Version: 1.0 To: marco caminati CC: "linux-media@vger.kernel.org" Subject: Re: rtl28xxu IR remote References: <51B26AF1.2000005@gmail.com> <1370876006.1569.YahooMailNeo@web28901.mail.ir2.yahoo.com> <1370876948.45967.YahooMailNeo@web28904.mail.ir2.yahoo.com> In-Reply-To: <1370876948.45967.YahooMailNeo@web28904.mail.ir2.yahoo.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 06/10/2013 06:09 PM, marco caminati wrote: > > >> Hi, I just compiled and tested Antti Palosaari branch and can confirm the remote works for my RTL2832U. >> I have updated the wiki[1] entry with the steps necessary to configure the remote control. >> Please confirm if these fixes your problem. > > > Thanks, but I can't confirm if this fixes my problem, because the modules I obtain building Antti's branch are not compatible with my existing kernel, so I can't test them (modprobe --force fails, and using a brand new kernel would be too much work on Tinycore at the moment). > On the other hand, I tried the sources fromgit://linuxtv.org/media_build.git, first with manual patches and then (when the latter got accepted) without them. But the ir remote does not work. > > I think Antti's repo and patching linuxtv repo should lead to the same results, right? I think the most easiest way could be compile & install whole Kernel from my tree. It is 3.10-rc4 + some fixes. media_build.git has also option to fetch developer git tree from linuxtv.org. Something like ./build --git git://linuxtv.org/anttip/media_tree.git rtl28xxu . That approach seem to be not documented on wiki: http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers regards Antti -- http://palosaari.fi/