From: "P. van Gaans" <w3ird_n3rd@gmx.net>
To: linux-media@vger.kernel.org
Subject: Fwd: [PATCH 2/6 v2] dvbsky, dvb-s/s2 usb box
Date: Sun, 30 Jun 2013 05:07:09 +0200 [thread overview]
Message-ID: <51CFA0DD.2040904@gmx.net> (raw)
In-Reply-To: <201204271506222501798@gmail.com>
Trying to figure out if a Mystique SaTiX-S2 Sky V2 USB device (USB ID
0572:6831, looks like it is a DVBSKY S960 clone) would be supported
before I buy, I came along this message.
Looking at
http://git.linuxtv.org/media_tree.git/blob/HEAD:/drivers/media/usb/dvb-usb/dw2102.c
it seems as if this patch never made it, so these USB S2 boxes would be
unsupported.
Would it still be possible to include this patch?
Best regards,
P. van Gaans
-------- Original Message --------
Subject: [PATCH 2/6 v2] dvbsky, dvb-s/s2 usb box
Date: Fri, 27 Apr 2012 15:06:29 +0800
From: nibble.max <nibble.max@gmail.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Antti Palosaari <crope@iki.fi>, linux-media
<linux-media@vger.kernel.org>
Also fix some code sytle errors checked by checkpatch.pl.
---
drivers/media/dvb/dvb-usb/Kconfig | 2 +
drivers/media/dvb/dvb-usb/dw2102.c | 337
++++++++++++++++++++++++++++++++----
2 files changed, 305 insertions(+), 34 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/Kconfig
b/drivers/media/dvb/dvb-usb/Kconfig
index be1db75..93c9381 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -279,6 +279,8 @@ config DVB_USB_DW2102
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_STB6000 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
+ select DVB_M88TS202X if !DVB_FE_CUSTOMISE
+ select DVB_M88DS3103 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select DVB_MT312 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c
b/drivers/media/dvb/dvb-usb/dw2102.c
index 451c5a7..1cf62fb 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -19,6 +19,8 @@
#include "stb6000.h"
#include "eds1547.h"
#include "cx24116.h"
+#include "m88ts202x.h"
+#include "m88ds3103.h"
#include "tda1002x.h"
#include "mt312.h"
#include "zl10039.h"
@@ -118,12 +120,12 @@ MODULE_PARM_DESC(demod, "demod to probe (1=cx24116
2=stv0903+stv6110 "
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
- u16 index, u8 * data, u16 len, int flags)
+ u16 index, u8 *data, u16 len, int flags)
{
int ret;
u8 *u8buf;
unsigned int pipe = (flags == DW210X_READ_MSG) ?
- usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
+ usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
u8buf = kmalloc(len, GFP_KERNEL);
@@ -133,7 +135,8 @@ static int dw210x_op_rw(struct usb_device *dev, u8
request, u16 value,
if (flags == DW210X_WRITE_MSG)
memcpy(u8buf, data, len);
- ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
+ ret = usb_control_msg(dev, pipe,
+ request, request_type | USB_TYPE_VENDOR,
value, index , u8buf, len, 2000);
if (flags == DW210X_READ_MSG)
@@ -179,7 +182,7 @@ static int dw2102_i2c_transfer(struct i2c_adapter
*adap, struct i2c_msg msg[],
break;
case 0x60:
if (msg[0].flags == 0) {
- /* write to tuner pll */
+ /* write to tuner pll */
buf6[0] = 0x2c;
buf6[1] = 5;
buf6[2] = 0xc0;
@@ -190,7 +193,7 @@ static int dw2102_i2c_transfer(struct i2c_adapter
*adap, struct i2c_msg msg[],
ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
buf6, 7, DW210X_WRITE_MSG);
} else {
- /* read from tuner */
+ /* read from tuner */
ret = dw210x_op_rw(d->udev, 0xb5, 0, 0,
buf6, 1, DW210X_READ_MSG);
msg[0].buf[0] = buf6[0];
@@ -273,7 +276,8 @@ static int dw2102_serit_i2c_transfer(struct
i2c_adapter *adap,
return num;
}
-static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct
i2c_msg msg[], int num)
+static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0;
@@ -346,7 +350,8 @@ static int dw2102_earda_i2c_transfer(struct
i2c_adapter *adap, struct i2c_msg ms
return num;
}
-static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg
msg[], int num)
+static int dw2104_i2c_transfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0;
@@ -712,7 +717,8 @@ static int dw210x_read_mac_address(struct
dvb_usb_device *d, u8 mac[6])
u8 eeprom[256], eepromline[16];
for (i = 0; i < 256; i++) {
- if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) <
0) {
+ if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2,
+ DW210X_READ_MSG) < 0) {
err("read eeprom failed.");
return -1;
} else {
@@ -882,6 +888,41 @@ static int s660_set_voltage(struct dvb_frontend
*fe, fe_sec_voltage_t voltage)
return 0;
}
+static int bstusb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t
voltage)
+{
+
+ struct dvb_usb_adapter *udev_adap =
+ (struct dvb_usb_adapter *)(fe->dvb->priv);
+
+ u8 obuf[3] = { 0xe, 0x80, 0 };
+ u8 ibuf[] = { 0 };
+
+ info("US6830: %s!\n", __func__);
+
+ if (voltage == SEC_VOLTAGE_OFF)
+ obuf[2] = 0;
+ else
+ obuf[2] = 1;
+
+ if (dvb_usb_generic_rw(udev_adap->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+ return 0;
+}
+
+static int bstusb_restart(struct dvb_frontend *fe)
+{
+
+ struct dvb_usb_adapter *udev_adap =
+ (struct dvb_usb_adapter *)(fe->dvb->priv);
+
+ u8 obuf[3] = { 0x36, 3, 0 };
+ u8 ibuf[] = { 0 };
+
+ if (dvb_usb_generic_rw(udev_adap->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x36 transfer failed.");
+ return 0;
+}
+
static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon)
{
static u8 led_off[] = { 0 };
@@ -987,12 +1028,37 @@ static struct ds3000_config su3000_ds3000_config = {
.ci_mode = 1,
};
+static struct m88ts202x_config dvbsky_ts202x_config = {
+ .bypasson = 0,
+ .clkout = 0,
+ .clkdiv = 0,
+};
+
+static struct m88ds3103_config US6830_ds3103_config = {
+ .demod_address = 0x68,
+ .ci_mode = 1,
+ .pin_ctrl = 0x83,
+ .ts_mode = 0,
+ .start_ctrl = bstusb_restart,
+ .set_voltage = bstusb_set_voltage,
+};
+
+static struct m88ds3103_config US6832_ds3103_config = {
+ .demod_address = 0x68,
+ .ci_mode = 1,
+ .pin_ctrl = 0x80,
+ .ts_mode = 0,
+ .start_ctrl = bstusb_restart,
+ .set_voltage = bstusb_set_voltage,
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
struct dvb_tuner_ops *tuner_ops = NULL;
if (demod_probe & 4) {
- d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
+ d->fe_adap[0].fe = dvb_attach(stv0900_attach,
+ &dw2104a_stv0900_config,
&d->dev->i2c_adap, 0);
if (d->fe_adap[0].fe != NULL) {
if (dvb_attach(stb6100_attach, d->fe_adap[0].fe,
@@ -1003,7 +1069,8 @@ static int dw2104_frontend_attach(struct
dvb_usb_adapter *d)
tuner_ops->get_frequency = stb6100_get_freq;
tuner_ops->set_bandwidth = stb6100_set_bandw;
tuner_ops->get_bandwidth = stb6100_get_bandw;
- d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage =
+ dw210x_set_voltage;
info("Attached STV0900+STB6100!\n");
return 0;
}
@@ -1011,13 +1078,15 @@ static int dw2104_frontend_attach(struct
dvb_usb_adapter *d)
}
if (demod_probe & 2) {
- d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
+ d->fe_adap[0].fe = dvb_attach(stv0900_attach,
+ &dw2104_stv0900_config,
&d->dev->i2c_adap, 0);
if (d->fe_adap[0].fe != NULL) {
if (dvb_attach(stv6110_attach, d->fe_adap[0].fe,
&dw2104_stv6110_config,
&d->dev->i2c_adap)) {
- d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage =
+ dw210x_set_voltage;
info("Attached STV0900+STV6110A!\n");
return 0;
}
@@ -1053,7 +1122,8 @@ static int dw2102_frontend_attach(struct
dvb_usb_adapter *d)
{
if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) {
/*dw2102_properties.adapter->tuner_attach = NULL;*/
- d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config,
+ d->fe_adap[0].fe = dvb_attach(si21xx_attach,
+ &serit_sp1511lhb_config,
&d->dev->i2c_adap);
if (d->fe_adap[0].fe != NULL) {
d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
@@ -1068,7 +1138,8 @@ static int dw2102_frontend_attach(struct
dvb_usb_adapter *d)
if (d->fe_adap[0].fe != NULL) {
if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61,
&d->dev->i2c_adap)) {
- d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage =
+ dw210x_set_voltage;
info("Attached stv0288!\n");
return 0;
}
@@ -1076,8 +1147,10 @@ static int dw2102_frontend_attach(struct
dvb_usb_adapter *d)
}
if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) {
- /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
- d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+ /*dw2102_properties.adapter->tuner_attach =
+ dw2102_tuner_attach;*/
+ d->fe_adap[0].fe = dvb_attach(stv0299_attach,
+ &sharp_z0194a_config,
&d->dev->i2c_adap);
if (d->fe_adap[0].fe != NULL) {
d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
@@ -1125,7 +1198,8 @@ static int stv0288_frontend_attach(struct
dvb_usb_adapter *d)
if (d->fe_adap[0].fe == NULL)
return -EIO;
- if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61,
&d->dev->i2c_adap))
+ if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe,
+ 0x61, &d->dev->i2c_adap))
return -EIO;
d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
@@ -1213,6 +1287,63 @@ static int su3000_frontend_attach(struct
dvb_usb_adapter *d)
return 0;
}
+static int dvbsky_usb_frontend_attach(struct dvb_usb_adapter *d,
+ struct m88ds3103_config *pdconf,
+ struct m88ts202x_config *ptconf)
+{
+ struct m88ts202x_devctl *ctrl;
+
+ u8 obuf[3] = { 0xe, 0x83, 0 };
+ u8 ibuf[] = { 0 };
+
+ info("dvbsky: %s!\n", __func__);
+ if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+
+ obuf[0] = 0xe;
+ obuf[1] = 0x83;
+ obuf[2] = 1;
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ err("command 0x0e transfer failed.");
+
+ obuf[0] = 0x51;
+
+ if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+ err("command 0x51 transfer failed.");
+
+ d->fe_adap[0].fe = dvb_attach(m88ds3103_attach, pdconf,
+ &d->dev->i2c_adap);
+ if (d->fe_adap[0].fe == NULL)
+ return -EIO;
+ ctrl = dvb_attach(m88ts202x_attach,
+ d->fe_adap[0].fe, ptconf, &d->dev->i2c_adap);
+ if (!ctrl) {
+ printk(KERN_ERR "No m88ts202x found!\n");
+ return -ENODEV;
+ }
+ pdconf->tuner_init = ctrl->tuner_init;
+ pdconf->tuner_sleep = ctrl->tuner_sleep;
+ pdconf->tuner_wakeup = ctrl->tuner_wakeup;
+ pdconf->tuner_set_frequency = ctrl->tuner_set_frequency;
+ pdconf->tuner_get_rfgain = ctrl->tuner_get_rfgain;
+ info("Attached M88DS3103!\n");
+ return 0;
+}
+
+static int US6830_frontend_attach(struct dvb_usb_adapter *d)
+{
+ return dvbsky_usb_frontend_attach(d,
+ &US6830_ds3103_config,
+ &dvbsky_ts202x_config);
+}
+
+static int US6832_frontend_attach(struct dvb_usb_adapter *d)
+{
+ return dvbsky_usb_frontend_attach(d,
+ &US6832_ds3103_config,
+ &dvbsky_ts202x_config);
+}
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
{
@@ -1435,6 +1566,28 @@ static int dw2102_rc_query(struct dvb_usb_device
*d, u32 *event, int *state)
return 0;
}
+/* dvbsky remote control */
+static int dvbsky_rc_query(struct dvb_usb_device *d)
+{
+ unsigned code = 0;
+ u8 obuf[0x40], ibuf[0x40], toggle;
+
+ obuf[0] = 0x10;
+ if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
+ err("rc transfer failed.");
+ code = (ibuf[0] << 8) | ibuf[1];
+ if (code != 0xffff) {
+ info("dvbsky rc code: %x", code);
+
+ toggle = (code & 0x800) ? 1 : 0;
+ code &= 0x3f;
+
+ rc_keydown(d->rc_dev, code, toggle);
+ }
+
+ return 0;
+}
+
enum dw2102_table_entry {
CYPRESS_DW2102,
CYPRESS_DW2101,
@@ -1451,6 +1604,9 @@ enum dw2102_table_entry {
TEVII_S480_1,
TEVII_S480_2,
X3M_SPC1400HD,
+ BST_US6830HD,
+ BST_US6831HD,
+ BST_US6832HD,
};
static struct usb_device_id dw2102_table[] = {
@@ -1458,7 +1614,8 @@ static struct usb_device_id dw2102_table[] = {
[CYPRESS_DW2101] = {USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
[CYPRESS_DW2104] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)},
[TEVII_S650] = {USB_DEVICE(0x9022, USB_PID_TEVII_S650)},
- [TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
+ [TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC,
+ USB_PID_CINERGY_S)},
[CYPRESS_DW3101] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
[TEVII_S630] = {USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
[PROF_1100] = {USB_DEVICE(0x3011, USB_PID_PROF_1100)},
@@ -1469,6 +1626,9 @@ static struct usb_device_id dw2102_table[] = {
[TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)},
[TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)},
[X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)},
+ [BST_US6830HD] = {USB_DEVICE(0x0572, 0x6830)},
+ [BST_US6831HD] = {USB_DEVICE(0x0572, 0x6831)},
+ [BST_US6832HD] = {USB_DEVICE(0x0572, 0x6832)},
{ }
};
@@ -1529,7 +1689,8 @@ static int dw2102_load_firmware(struct usb_device
*dev,
/* init registers */
switch (dev->descriptor.idProduct) {
case USB_PID_TEVII_S650:
- dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table;
+ dw2104_properties.rc.legacy.rc_map_table =
+ rc_map_tevii_table;
dw2104_properties.rc.legacy.rc_map_size =
ARRAY_SIZE(rc_map_tevii_table);
case USB_PID_DW2104:
@@ -1553,7 +1714,8 @@ static int dw2102_load_firmware(struct usb_device
*dev,
DW210X_READ_MSG);
if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) {
dw2102_properties.i2c_algo = &dw2102_i2c_algo;
- dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach;
+ dw2102_properties.adapter->fe[0].tuner_attach =
+ &dw2102_tuner_attach;
break;
} else {
/* check STV0288 frontend */
@@ -1565,7 +1727,8 @@ static int dw2102_load_firmware(struct usb_device
*dev,
dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3,
DW210X_READ_MSG);
if (reset16[2] == 0x11) {
- dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo;
+ dw2102_properties.i2c_algo =
+ &dw2102_earda_i2c_algo;
break;
}
}
@@ -1622,7 +1785,7 @@ static struct dvb_usb_device_properties
dw2102_properties = {
}
}
},
- }},
+ } },
}
},
.num_device_descs = 3,
@@ -1676,7 +1839,7 @@ static struct dvb_usb_device_properties
dw2104_properties = {
}
}
},
- }},
+ } },
}
},
.num_device_descs = 2,
@@ -1727,7 +1890,7 @@ static struct dvb_usb_device_properties
dw3101_properties = {
}
}
},
- }},
+ } },
}
},
.num_device_descs = 1,
@@ -1773,7 +1936,7 @@ static struct dvb_usb_device_properties
s6x0_properties = {
}
}
},
- }},
+ } },
}
},
.num_device_descs = 1,
@@ -1854,7 +2017,7 @@ static struct dvb_usb_device_properties
su3000_properties = {
}
}
}
- }},
+ } },
}
},
.num_device_descs = 3,
@@ -1874,6 +2037,108 @@ static struct dvb_usb_device_properties
su3000_properties = {
}
};
+static struct dvb_usb_device_properties US6830_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct su3000_state),
+ .power_ctrl = su3000_power_ctrl,
+ .num_adapters = 1,
+ .identify_state = su3000_identify_state,
+ .i2c_algo = &su3000_i2c_algo,
+
+ .rc.core = {
+ .rc_interval = 300,
+ .rc_codes = RC_MAP_DVBSKY,
+ .module_name = "dvbskyir",
+ .rc_query = dvbsky_rc_query,
+ .allowed_protos = RC_TYPE_RC5,
+ },
+
+ .read_mac_address = su3000_read_mac_address,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = { {
+ .streaming_ctrl = su3000_streaming_ctrl,
+ .frontend_attach = US6830_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ }
+ } },
+ }
+ },
+ .num_device_descs = 2,
+ .devices = {
+ { "Bestunar US6830 HD",
+ { &dw2102_table[BST_US6830HD], NULL },
+ { NULL },
+ },
+ { "Bestunar US6831 HD",
+ { &dw2102_table[BST_US6831HD], NULL },
+ { NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties US6832_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct su3000_state),
+ .power_ctrl = su3000_power_ctrl,
+ .num_adapters = 1,
+ .identify_state = su3000_identify_state,
+ .i2c_algo = &su3000_i2c_algo,
+
+ .rc.core = {
+ .rc_interval = 300,
+ .rc_codes = RC_MAP_DVBSKY,
+ .module_name = "dvbskyir",
+ .rc_query = dvbsky_rc_query,
+ .allowed_protos = RC_TYPE_RC5,
+ },
+
+ .read_mac_address = su3000_read_mac_address,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = { {
+ .streaming_ctrl = su3000_streaming_ctrl,
+ .frontend_attach = US6832_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ }
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ { "Bestunar US6832 HD",
+ { &dw2102_table[BST_US6832HD], NULL },
+ { NULL },
+ },
+ }
+};
+
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1917,20 +2182,24 @@ static int dw2102_probe(struct usb_interface *intf,
if (0 == dvb_usb_device_init(intf, &dw2102_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw2104_properties,
+ 0 == dvb_usb_device_init(intf, &dw2104_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &dw3101_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &s6x0_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw3101_properties,
+ 0 == dvb_usb_device_init(intf, p1100,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &s6x0_properties,
+ 0 == dvb_usb_device_init(intf, s660,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p1100,
+ 0 == dvb_usb_device_init(intf, p7500,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, s660,
+ 0 == dvb_usb_device_init(intf, &su3000_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p7500,
+ 0 == dvb_usb_device_init(intf, &US6830_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &su3000_properties,
- THIS_MODULE, NULL, adapter_nr))
+ 0 == dvb_usb_device_init(intf, &US6832_properties,
+ THIS_MODULE, NULL, adapter_nr))
return 0;
return -ENODEV;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-06-30 3:07 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-22 10:38 [PATCH 1/3] m88brs2000 DVB-S frontend and tuner module Malcolm Priestley
2012-01-26 16:56 ` Mauro Carvalho Chehab
2012-01-27 22:26 ` Malcolm Priestley
2012-04-15 15:53 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-19 18:06 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-19 20:08 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-20 9:47 ` Antti Palosaari
2012-04-20 17:24 ` Mauro Carvalho Chehab
2012-04-21 2:45 ` nibble.max
2012-04-23 16:41 ` Antti Palosaari
2012-04-23 19:51 ` Konstantin Dimitrov
2012-04-23 21:04 ` Antti Palosaari
2012-04-27 18:44 ` Konstantin Dimitrov
2012-04-23 21:49 ` Mauro Carvalho Chehab
2012-04-27 19:01 ` Konstantin Dimitrov
2012-04-27 19:36 ` Mauro Carvalho Chehab
2012-04-27 20:37 ` Konstantin Dimitrov
2012-04-27 20:40 ` Konstantin Dimitrov
2012-04-27 20:54 ` Antti Palosaari
2012-04-27 21:01 ` Konstantin Dimitrov
2012-04-27 19:55 ` Antti Palosaari
2012-04-27 20:21 ` Konstantin Dimitrov
2012-04-27 20:42 ` Antti Palosaari
2012-04-27 21:13 ` Konstantin Dimitrov
2012-04-28 3:54 ` nibble.max
2012-04-28 9:17 ` Demod hardware pid filter implement nibble.max
2012-04-28 10:15 ` Antti Palosaari
2012-04-24 2:45 ` Re: [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver nibble.max
2012-04-26 13:03 ` nibble.max
2012-04-26 13:24 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103 " nibble.max
2012-04-27 11:06 ` Mauro Carvalho Chehab
2012-04-27 14:17 ` Re: [PATCH 1/6 v2] dvbsky, montage dvb-s/s2 TS202x tuner and M88DS3103demodulator driver nibble.max
2012-04-27 14:35 ` Mauro Carvalho Chehab
2012-04-27 18:03 ` Konstantin Dimitrov
2012-04-27 7:06 ` [PATCH 2/6 v2] dvbsky, dvb-s/s2 usb box nibble.max
2013-06-30 3:07 ` P. van Gaans [this message]
2014-01-15 19:30 ` Mauro Carvalho Chehab
2012-04-27 7:06 ` [PATCH 3/6 v2] dvbsky, dvb-s/s2 PCIe card nibble.max
2012-04-27 7:07 ` [PATCH 4/6 v2] dvbsky, dvb-s/s2 PCI card nibble.max
2012-04-27 7:07 ` [PATCH 5/6 v2] dvbsky, remote control key map nibble.max
2012-04-27 7:07 ` [PATCH 6/6 v2] dvbsky, remote control include header file nibble.max
2012-04-20 17:10 ` [PATCH 1/6] m88ds3103, montage dvb-s/s2 demodulator driver Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 2/6] m88ds3103, dvbsky dvb-s2 usb box nibble.max
2012-04-19 18:09 ` Mauro Carvalho Chehab
2012-04-20 8:08 ` nibble.max
2012-04-20 17:08 ` Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 3/6] m88ds3103, dvbsky dvb-s2 cx23883 pci card nibble.max
2012-04-15 15:53 ` [PATCH 4/6] m88ds3103, dvbsky dvb-s2 cx23885 pcie card nibble.max
2012-04-19 18:11 ` Mauro Carvalho Chehab
2012-04-15 15:53 ` [PATCH 5/6] m88ds3103, dvbsky remote control key map nibble.max
2012-04-19 18:16 ` Mauro Carvalho Chehab
2012-04-20 8:01 ` nibble.max
2012-04-15 15:53 ` [PATCH 6/6] m88ds3103, dvbsky remote control include header file nibble.max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51CFA0DD.2040904@gmx.net \
--to=w3ird_n3rd@gmx.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).