* RE: stv090x vs stv0900 support
2013-08-27 7:19 ` Krishna Kishore
@ 2013-08-28 12:35 ` Krishna Kishore
2013-08-29 15:20 ` Krishna Kishore
0 siblings, 1 reply; 10+ messages in thread
From: Krishna Kishore @ 2013-08-28 12:35 UTC (permalink / raw)
To: Chris Lee, Mariusz Bialonczyk
Cc: Linux Media Mailing List, linux-usb@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 5098 bytes --]
Hi,
When read_mac_address is called, khubd timed out error is seen. It looks like USB control msgs are not successfully being sent.
Can someone please check attached logs and help me?
Regards,
Kishore.
________________________________________
From: Krishna Kishore
Sent: Tuesday, August 27, 2013 12:49 PM
To: Chris Lee; Mariusz Bialonczyk
Cc: Linux Media Mailing List
Subject: RE: stv090x vs stv0900 support
Hi Chris,
Does it help me in getting through the problem I am facing?
On Desktop (Ubuntu 12.04), 7500 does not work. But, on desktop Ubuntu 13.04 it works fine.
Since it is working well with 13.04, I tried with 3.8.x kernel on my board. It does not work. So, I can see that kernel version does not matter.
I assume you have 7500 DVB receiver. Can you please try this device with Ubuntu 12.04 and 13.04 and see the difference in the behavior?
If it helps you, I can send you logs of 12.04 and 13.04.
Thanks in advance.
Regards,
Kishore.
-----Original Message-----
From: linux-media-owner@vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of Chris Lee
Sent: Friday, August 16, 2013 6:21 PM
To: Mariusz Bialonczyk
Cc: Linux Media Mailing List
Subject: Re: stv090x vs stv0900 support
Ive found a few bugs in stv090x that I want to get ironed out 100% before I submit the patch, dvb-s2 8psk fec2/3 for example has a slightly higher ber then stv0900, Got that fixed but Im still not happy with the patch, has a few other minor issues with low sr dvb-s qpsk sometimes not locking on the first attempt to tune. The Prof 7500 also seems to have an issue with stb6100 where get_frequency() wont return the correct frequency when other stb6100 devices I have do.
Once I get those figured out to the point Im happy I'll submit it for everyones comments.
Thanks for the link Mariusz, I'll check it out, maybe youve overcome some of the shortfalls Ive found
Chris Lee
On Fri, Aug 16, 2013 at 1:19 AM, Mariusz Bialonczyk <manio@skyboo.net> wrote:
> On 07/24/2013 06:39 PM, Chris Lee wrote:
>> Im looking for comments on these two modules, they overlap support
>> for the same demods. stv0900 supporting stv0900 and stv090x
>> supporting
>> stv0900 and stv0903. Ive flipped a few cards from one to the other
>> and they function fine. In some ways stv090x is better suited. Its a
>> pain supporting two modules that are written differently but do the
>> same thing, a fix in one almost always means it has to be implemented
>> in the other as well.
> I totally agree with you.
>
>> Im not necessarily suggesting dumping stv0900, but Id like to flip a
>> few cards that I own over to stv090x just to standardize it. The Prof
>> 7301 and Prof 7500.
> I did it already for 7301, see here:
> http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure
> /28082 but due to 'political' reasons it doesn't went upstream.
> For private use i am still using this patch on recent kernels, because
> it is working much more stable for my card comparing to stv0900.
> I think that moving prof 7500 should be relative easy, i even prepared
> a patch for this but I was not able to test it due to lack of hardware.
>
>> Whats everyones thoughts on this? It will cut the number of patch''s
>> in half when it comes to these demods. Ive got alot more coming lol
>> :)
> Oh yes, you could also take into account another duplicate code:
> stb6100_cfg.h used for stv090x
> stb6100_proc.h used for stv0900
> In my patch I've successfully switched to stb6100_cfg.h.
>>
>> Chris
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-media" in the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> regards,
> --
> Mariusz Białończyk | xmpp/e-mail: manio@skyboo.net
> http://manio.skyboo.net | https://github.com/manio
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
[-- Attachment #2: var_log_messages --]
[-- Type: application/octet-stream, Size: 43634 bytes --]
Jan 1 00:00:01 buildroot syslog.info syslogd started: BusyBox v1.21.0
Jan 1 00:00:01 buildroot user.notice kernel: klogd started: BusyBox v1.21.0 (2013-07-31 23:31:34 IST)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] Linux version 3.9.0 (root@pcz-ltelab10.sasken.com) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #14 SMP Wed Aug 28 23:11:27 IST 2013
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] Machine: OMAP4 Panda board
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] On node 0 totalpages: 261888
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0870000, node_mem_map c0dcf000
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] Normal zone: 1520 pages used for memmap
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] HighMem zone: 528 pages used for memmap
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] OMAP4430 ES2.1
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c15e1000 s13632 r8192 d15040 u36864
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] pcpu-alloc: s13632 r8192 d15040 u36864 alloc=9*4096
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] __ex_table already sorted, skipping sort
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Memory: 1023MB = 1023MB total
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] Memory: 1007868k/1007868k available, 40708k reserved, 269312K highmem
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc0770928 (7587 kB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] .init : 0xc0771000 - 0xc07c8540 ( 350 kB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] .data : 0xc07ca000 - 0xc0872ca0 ( 676 kB)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.000000] .bss : 0xc0872ca0 - 0xc0dce748 (5487 kB)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Hierarchical RCU implementation.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.000000] Console: colour dummy device 80x30
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... MAX_LOCK_DEPTH: 48
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... CLASSHASH_SIZE: 4096
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] ... CHAINHASH_SIZE: 16384
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] memory used by lock dependency info: 3695 kB
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.000000] per task-struct memory footprint: 1152 bytes
Jan 1 00:00:01 buildroot user.info kernel: [ 0.001037] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.079772] pid_max: default: 32768 minimum: 301
Jan 1 00:00:01 buildroot user.info kernel: [ 0.080322] Security Framework initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 0.080535] Mount-cache hash table entries: 512
Jan 1 00:00:01 buildroot user.info kernel: [ 0.084167] CPU: Testing write buffer coherency: ok
Jan 1 00:00:01 buildroot user.info kernel: [ 0.085601] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan 1 00:00:01 buildroot user.info kernel: [ 0.085906] Setting up static identity map for 0xc054c2f0 - 0xc054c360
Jan 1 00:00:01 buildroot user.info kernel: [ 0.085968] L310 cache controller enabled
Jan 1 00:00:01 buildroot user.info kernel: [ 0.085998] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.089599] CPU1: Booted secondary processor
Jan 1 00:00:01 buildroot user.info kernel: [ 0.125823] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan 1 00:00:01 buildroot user.info kernel: [ 0.126129] Brought up 2 CPUs
Jan 1 00:00:01 buildroot user.info kernel: [ 0.126159] SMP: Total of 2 processors activated (3188.32 BogoMIPS).
Jan 1 00:00:01 buildroot user.info kernel: [ 0.126159] CPU: All CPU(s) started in SVC mode.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.128234] devtmpfs: initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 0.193572] pinctrl core: initialized pinctrl subsystem
Jan 1 00:00:01 buildroot user.info kernel: [ 0.197143] regulator-dummy: no parameters
Jan 1 00:00:01 buildroot user.info kernel: [ 0.200042] NET: Registered protocol family 16
Jan 1 00:00:01 buildroot user.info kernel: [ 0.206268] DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan 1 00:00:01 buildroot user.info kernel: [ 0.207305] omap-gpmc omap-gpmc: GPMC revision 6.0
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.213623] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Jan 1 00:00:01 buildroot user.info kernel: [ 0.213897] OMAP GPIO hardware version 0.1
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.215026] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.216308] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.217529] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.218811] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
Jan 1 00:00:01 buildroot user.debug kernel: [ 0.220062] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
Jan 1 00:00:01 buildroot user.info kernel: [ 0.223876] omap_mux_init: Add partition: #1: core, flags: 3
Jan 1 00:00:01 buildroot user.info kernel: [ 0.225616] omap_mux_init: Add partition: #2: wkup, flags: 3
Jan 1 00:00:01 buildroot user.err kernel: [ 0.225769] error setting wl12xx data: -38
Jan 1 00:00:01 buildroot user.err kernel: [ 0.226013] omap_mux_get_by_name: Could not find signal sys_nirq
Jan 1 00:00:01 buildroot user.err kernel: [ 0.229614] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
Jan 1 00:00:01 buildroot user.info kernel: [ 0.290527] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.290527] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.300140] OMAP DMA hardware revision 0.0
Jan 1 00:00:01 buildroot user.info kernel: [ 0.300720] Serial: AMBA PL011 UART driver
Jan 1 00:00:01 buildroot user.info kernel: [ 0.303344] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
Jan 1 00:00:01 buildroot user.info kernel: [ 0.345520] bio: create slab <bio-0> at 0
Jan 1 00:00:01 buildroot user.info kernel: [ 0.391357] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
Jan 1 00:00:01 buildroot user.info kernel: [ 0.392242] vwl1271: 1800 mV
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.396179] SCSI subsystem initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 0.397552] usbcore: registered new interface driver usbfs
Jan 1 00:00:01 buildroot user.info kernel: [ 0.397827] usbcore: registered new interface driver hub
Jan 1 00:00:01 buildroot user.info kernel: [ 0.398223] usbcore: registered new device driver usb
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.402770] Skipping twl internal clock init and using bootloader value (unknown osc rate)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.404571] twl 1-0048: PIH (irq 39) chaining IRQs 418..438
Jan 1 00:00:01 buildroot user.info kernel: [ 0.406311] VUSB: 3300 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.407348] vdd_mpu: 500 <--> 1500 mV normal
Jan 1 00:00:01 buildroot user.info kernel: [ 0.408294] vdd_iva: 500 <--> 1500 mV normal
Jan 1 00:00:01 buildroot user.info kernel: [ 0.409301] vdd_core: 500 <--> 1500 mV normal
Jan 1 00:00:01 buildroot user.info kernel: [ 0.410736] V1V8: 1800 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.411712] V2V1: 2100 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.412933] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.414337] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.415954] VCXIO: 1800 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.416046] VCXIO: supplied by V2V1
Jan 1 00:00:01 buildroot user.info kernel: [ 0.418243] VDAC: 1800 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.418334] VDAC: supplied by V2V1
Jan 1 00:00:01 buildroot user.info kernel: [ 0.420013] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.421447] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.423034] VANA: 2100 mV normal standby
Jan 1 00:00:01 buildroot user.info kernel: [ 0.423736] omap_i2c omap_i2c.1: bus 1 rev0.10 at 400 kHz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.424499] omap_i2c omap_i2c.2: bus 2 rev0.10 at 400 kHz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.425506] omap_i2c omap_i2c.3: bus 3 rev0.10 at 100 kHz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.426879] omap_i2c omap_i2c.4: bus 4 rev0.10 at 400 kHz
Jan 1 00:00:01 buildroot user.info kernel: [ 0.431518] Switching to clocksource 32k_counter
Jan 1 00:00:01 buildroot user.info kernel: [ 0.510559] NET: Registered protocol family 2
Jan 1 00:00:01 buildroot user.info kernel: [ 0.512664] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.512969] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.515319] TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.515533] TCP: reno registered
Jan 1 00:00:01 buildroot user.info kernel: [ 0.515563] UDP hash table entries: 512 (order: 3, 40960 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.515899] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.516815] NET: Registered protocol family 1
Jan 1 00:00:01 buildroot user.info kernel: [ 0.517913] RPC: Registered named UNIX socket transport module.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.517944] RPC: Registered udp transport module.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.517944] RPC: Registered tcp transport module.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.517944] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.520568] NetWinder Floating Point Emulator V0.97 (double precision)
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.656249] bounce pool size: 64 pages
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.656829] VFS: Disk quotas dquot_6.5.2
Jan 1 00:00:01 buildroot user.warn kernel: [ 0.657043] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.658996] NFS: Registering the id_resolver key type
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.659332] Key type id_resolver registered
Jan 1 00:00:01 buildroot user.notice kernel: [ 0.659332] Key type id_legacy registered
Jan 1 00:00:01 buildroot user.info kernel: [ 0.659454] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:01 buildroot user.info kernel: [ 0.659942] msgmni has been set to 1474
Jan 1 00:00:01 buildroot user.info kernel: [ 0.662231] io scheduler noop registered
Jan 1 00:00:01 buildroot user.info kernel: [ 0.662261] io scheduler deadline registered
Jan 1 00:00:01 buildroot user.info kernel: [ 0.662322] io scheduler cfq registered (default)
Jan 1 00:00:01 buildroot user.info kernel: [ 0.664855] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 1 00:00:01 buildroot user.info kernel: [ 0.669128] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
Jan 1 00:00:01 buildroot user.info kernel: [ 0.670532] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
Jan 1 00:00:01 buildroot user.info kernel: [ 0.671569] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
Jan 1 00:00:01 buildroot user.info kernel: [ 1.418273] console [ttyO2] enabled
Jan 1 00:00:01 buildroot user.info kernel: [ 1.423034] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
Jan 1 00:00:01 buildroot user.info kernel: [ 1.449798] brd: module loaded
Jan 1 00:00:01 buildroot user.info kernel: [ 1.464294] loop: module loaded
Jan 1 00:00:01 buildroot user.err kernel: [ 1.470611] mtdoops: mtd device (mtddev=name/number) must be supplied
Jan 1 00:00:01 buildroot user.info kernel: [ 1.477996] OneNAND driver initializing
Jan 1 00:00:01 buildroot user.info kernel: [ 1.488159] usbcore: registered new interface driver asix
Jan 1 00:00:01 buildroot user.info kernel: [ 1.494171] usbcore: registered new interface driver ax88179_178a
Jan 1 00:00:01 buildroot user.info kernel: [ 1.500823] usbcore: registered new interface driver cdc_ether
Jan 1 00:00:01 buildroot user.info kernel: [ 1.507263] usbcore: registered new interface driver smsc95xx
Jan 1 00:00:01 buildroot user.info kernel: [ 1.513580] usbcore: registered new interface driver net1080
Jan 1 00:00:01 buildroot user.info kernel: [ 1.519775] usbcore: registered new interface driver cdc_subset
Jan 1 00:00:01 buildroot user.info kernel: [ 1.526275] usbcore: registered new interface driver zaurus
Jan 1 00:00:01 buildroot user.info kernel: [ 1.532470] usbcore: registered new interface driver cdc_ncm
Jan 1 00:00:01 buildroot user.info kernel: [ 1.539916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.546813] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.547058] ehci-omap ehci-omap.0: failed to get ehci port0 regulator
Jan 1 00:00:01 buildroot user.info kernel: [ 1.547149] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
Jan 1 00:00:01 buildroot user.info kernel: [ 1.554809] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.562652] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.562683] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.563781] ehci-omap ehci-omap.0: park 0
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.563903] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
Jan 1 00:00:01 buildroot user.info kernel: [ 1.563964] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.570007] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
Jan 1 00:00:01 buildroot user.info kernel: [ 1.581848] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.588470] usb usb1: default language 0x0409
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.588531] usb usb1: udev 1, busnum 1, minor = 0
Jan 1 00:00:01 buildroot user.info kernel: [ 1.588531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 1 00:00:01 buildroot user.info kernel: [ 1.595733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 00:00:01 buildroot user.info kernel: [ 1.603363] usb usb1: Product: OMAP-EHCI Host Controller
Jan 1 00:00:01 buildroot user.info kernel: [ 1.608947] usb usb1: Manufacturer: Linux 3.9.0 ehci_hcd
Jan 1 00:00:01 buildroot user.info kernel: [ 1.614562] usb usb1: SerialNumber: ehci-omap.0
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.620910] usb usb1: usb_probe_device
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.620941] usb usb1: configuration #1 chosen from 1 choice
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.621368] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.622100] hub 1-0:1.0: usb_probe_interface
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.622131] hub 1-0:1.0: usb_probe_interface - got id
Jan 1 00:00:01 buildroot user.info kernel: [ 1.622161] hub 1-0:1.0: USB hub found
Jan 1 00:00:01 buildroot user.info kernel: [ 1.626220] hub 1-0:1.0: 3 ports detected
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.630462] hub 1-0:1.0: standalone hub
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.630462] hub 1-0:1.0: individual port power switching
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.630493] hub 1-0:1.0: individual port over-current protection
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.630493] hub 1-0:1.0: power on to power good time: 20ms
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.630737] hub 1-0:1.0: local power source is good
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.631591] hub 1-0:1.0: enabling power on all ports
Jan 1 00:00:01 buildroot user.info kernel: [ 1.633605] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.640106] ohci_hcd: block sizes: ed 64 td 64
Jan 1 00:00:01 buildroot user.info kernel: [ 1.640655] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
Jan 1 00:00:01 buildroot user.info kernel: [ 1.647583] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.655609] ohci-omap3 ohci-omap3.0: starting OHCI controller
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.655731] ohci-omap3 ohci-omap3.0: created debug files
Jan 1 00:00:01 buildroot user.info kernel: [ 1.655792] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742156] ohci-omap3 ohci-omap3.0: OHCI controller state
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742156] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers, rh state running
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742187] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742187] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742218] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742218] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742248] ohci-omap3 ohci-omap3.0: hcca frame #0015
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742248] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742279] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742279] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742279] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742309] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742309] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742431] usb usb2: default language 0x0409
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.742492] usb usb2: udev 1, busnum 2, minor = 128
Jan 1 00:00:01 buildroot user.info kernel: [ 1.742492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan 1 00:00:01 buildroot user.info kernel: [ 1.749633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 00:00:01 buildroot user.info kernel: [ 1.757263] usb usb2: Product: OMAP3 OHCI Host Controller
Jan 1 00:00:01 buildroot user.info kernel: [ 1.762939] usb usb2: Manufacturer: Linux 3.9.0 ohci_hcd
Jan 1 00:00:01 buildroot user.info kernel: [ 1.768524] usb usb2: SerialNumber: ohci-omap3.0
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.773590] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.773620] hub 1-0:1.0: port 1: status 0501 change 0001
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.774566] usb usb2: usb_probe_device
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.774597] usb usb2: configuration #1 chosen from 1 choice
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.774658] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.775085] hub 2-0:1.0: usb_probe_interface
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.775085] hub 2-0:1.0: usb_probe_interface - got id
Jan 1 00:00:01 buildroot user.info kernel: [ 1.775115] hub 2-0:1.0: USB hub found
Jan 1 00:00:01 buildroot user.info kernel: [ 1.779083] hub 2-0:1.0: 3 ports detected
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783325] hub 2-0:1.0: standalone hub
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783355] hub 2-0:1.0: no power switching (usb 1.0)
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783355] hub 2-0:1.0: global over-current protection
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783386] hub 2-0:1.0: power on to power good time: 20ms
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783416] hub 2-0:1.0: local power source is good
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783416] hub 2-0:1.0: no over-current condition exists
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.783843] hub 2-0:1.0: trying to enable port power on non-switchable hub
Jan 1 00:00:01 buildroot user.info kernel: [ 1.785827] usbcore: registered new interface driver cdc_wdm
Jan 1 00:00:01 buildroot user.info kernel: [ 1.791809] Initializing USB Mass Storage driver...
Jan 1 00:00:01 buildroot user.info kernel: [ 1.797302] usbcore: registered new interface driver usb-storage
Jan 1 00:00:01 buildroot user.info kernel: [ 1.803649] USB Mass Storage support registered.
Jan 1 00:00:01 buildroot user.info kernel: [ 1.808776] usbcore: registered new interface driver usbtest
Jan 1 00:00:01 buildroot user.info kernel: [ 1.815917] mousedev: PS/2 mouse device common for all mice
Jan 1 00:00:01 buildroot user.warn kernel: [ 1.825073] twl_rtc twl_rtc: Power up reset detected.
Jan 1 00:00:01 buildroot user.info kernel: [ 1.831207] twl_rtc twl_rtc: Enabling TWL-RTC
Jan 1 00:00:01 buildroot user.info kernel: [ 1.839447] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Jan 1 00:00:01 buildroot user.info kernel: [ 1.846405] i2c /dev entries driver
Jan 1 00:00:01 buildroot user.info kernel: [ 1.853088] usbcore: registered new interface driver i2c-tiny-usb
Jan 1 00:00:01 buildroot user.info kernel: [ 1.859954] IR NEC protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.864746] IR RC5(x) protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.869781] IR RC6 protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.874572] IR JVC protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.879364] IR Sony protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.884216] IR RC5 (streamzap) protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.890075] IR SANYO protocol handler initialized
Jan 1 00:00:01 buildroot user.info kernel: [ 1.895050] IR MCE Keyboard/mouse protocol handler initialized
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.901519] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.901611] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
Jan 1 00:00:01 buildroot user.info kernel: [ 1.902130] usbcore: registered new interface driver dw2102
Jan 1 00:00:01 buildroot user.info kernel: [ 1.908020] Driver for 1-wire Dallas network protocol.
Jan 1 00:00:01 buildroot user.info kernel: [ 1.916381] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
Jan 1 00:00:01 buildroot user.info kernel: [ 1.925903] omap-dma-engine omap-dma-engine: allocating channel for 62
Jan 1 00:00:01 buildroot user.info kernel: [ 1.932830] omap-dma-engine omap-dma-engine: allocating channel for 61
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.962127] ehci-omap ehci-omap.0: port 1 reset complete, port enabled
Jan 1 00:00:01 buildroot user.debug kernel: [ 1.962158] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
Jan 1 00:00:01 buildroot user.info kernel: [ 1.982147] omap-dma-engine omap-dma-engine: allocating channel for 60
Jan 1 00:00:01 buildroot user.info kernel: [ 1.989044] omap-dma-engine omap-dma-engine: allocating channel for 59
Jan 1 00:00:01 buildroot user.info kernel: [ 2.021881] usb 1-1: new high-speed USB device number 2 using ehci-omap
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.082000] ehci-omap ehci-omap.0: port 1 reset complete, port enabled
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.082000] ehci-omap ehci-omap.0: GetStatus port:1 status 001805 0 ACK POWER sig=j PE CONNECT
Jan 1 00:00:01 buildroot user.info kernel: [ 2.105621] ledtrig-cpu: registered to indicate activity on CPUs
Jan 1 00:00:01 buildroot user.info kernel: [ 2.112915] usbcore: registered new interface driver usbhid
Jan 1 00:00:01 buildroot user.info kernel: [ 2.118774] usbhid: USB HID core driver
Jan 1 00:00:01 buildroot user.info kernel: [ 2.123657] oprofile: no performance counters
Jan 1 00:00:01 buildroot user.info kernel: [ 2.129638] oprofile: using timer interrupt.
Jan 1 00:00:01 buildroot user.info kernel: [ 2.134735] TCP: cubic registered
Jan 1 00:00:01 buildroot user.info kernel: [ 2.138244] Initializing XFRM netlink socket
Jan 1 00:00:01 buildroot user.info kernel: [ 2.143127] NET: Registered protocol family 17
Jan 1 00:00:01 buildroot user.info kernel: [ 2.147857] NET: Registered protocol family 15
Jan 1 00:00:01 buildroot user.notice kernel: [ 2.152832] Key type dns_resolver registered
Jan 1 00:00:01 buildroot user.info kernel: [ 2.157440] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
Jan 1 00:00:01 buildroot user.err kernel: [ 2.172027] Power Management for TI OMAP4.
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.175201] usb 1-1: udev 2, busnum 1, minor = 1
Jan 1 00:00:01 buildroot user.info kernel: [ 2.175231] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Jan 1 00:00:01 buildroot user.info kernel: [ 2.175231] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 1 00:00:01 buildroot user.warn kernel: [ 2.190917] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.192108] usb 1-1: usb_probe_device
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.192138] usb 1-1: configuration #1 chosen from 1 choice
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.192596] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193054] hub 1-1:1.0: usb_probe_interface
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193054] hub 1-1:1.0: usb_probe_interface - got id
Jan 1 00:00:01 buildroot user.info kernel: [ 2.193115] hub 1-1:1.0: USB hub found
Jan 1 00:00:01 buildroot user.info kernel: [ 2.193359] hub 1-1:1.0: 5 ports detected
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193359] hub 1-1:1.0: compound device; port removable status: FRRRR
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193359] hub 1-1:1.0: individual port power switching
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193359] hub 1-1:1.0: individual port over-current protection
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193756] hub 1-1:1.0: TT per port
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193756] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.193786] hub 1-1:1.0: power on to power good time: 100ms
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.194244] hub 1-1:1.0: local power source is good
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.194885] hub 1-1:1.0: enabling power on all ports
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.196044] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.196228] hub 2-0:1.0: hub_suspend
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.196472] usb usb2: bus auto-suspend, wakeup 1
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.196502] ohci-omap3 ohci-omap3.0: suspend root hub
Jan 1 00:00:01 buildroot user.info kernel: [ 2.206390] ThumbEE CPU extension supported.
Jan 1 00:00:01 buildroot user.warn kernel: [ 2.213714] VANA: incomplete constraints, leaving on
Jan 1 00:00:01 buildroot user.warn kernel: [ 2.220153] VDAC: incomplete constraints, leaving on
Jan 1 00:00:01 buildroot user.warn kernel: [ 2.226257] VUSB: incomplete constraints, leaving on
Jan 1 00:00:01 buildroot user.info kernel: [ 2.234619] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
Jan 1 00:00:01 buildroot user.info kernel: [ 2.246307] Waiting for root device /dev/mmcblk0p2...
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.292053] hub 1-1:1.0: port 1: status 0101 change 0001
Jan 1 00:00:01 buildroot user.warn kernel: [ 2.351562] mmc0: host does not support reading read-only switch. assuming write-enable.
Jan 1 00:00:01 buildroot user.info kernel: [ 2.364501] mmc0: new high speed SDHC card at address aaaa
Jan 1 00:00:01 buildroot user.info kernel: [ 2.372070] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
Jan 1 00:00:01 buildroot user.info kernel: [ 2.397766] mmcblk0: p1 p2
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.401916] usb 1-1: link qh256-0001/eda56880 start 1 [1/0 us]
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.401977] hub 1-1:1.0: state 7 ports 5 chg 0002 evt 0000
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.402313] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
Jan 1 00:00:01 buildroot user.err kernel: [ 2.463775] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
Jan 1 00:00:01 buildroot user.err kernel: [ 2.475067] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
Jan 1 00:00:01 buildroot user.info kernel: [ 2.485809] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
Jan 1 00:00:01 buildroot user.info kernel: [ 2.531585] EXT4-fs (mmcblk0p2): recovery complete
Jan 1 00:00:01 buildroot user.info kernel: [ 2.539062] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 00:00:01 buildroot user.info kernel: [ 2.547698] VFS: Mounted root (ext4 filesystem) on device 179:2.
Jan 1 00:00:01 buildroot user.info kernel: [ 2.556945] devtmpfs: mounted
Jan 1 00:00:01 buildroot user.info kernel: [ 2.560455] Freeing init memory: 348K
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.603302] usb 1-1.1: udev 3, busnum 1, minor = 2
Jan 1 00:00:01 buildroot user.info kernel: [ 2.603332] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jan 1 00:00:01 buildroot user.info kernel: [ 2.610595] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.619506] usb 1-1.1: usb_probe_device
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.619537] usb 1-1.1: configuration #1 chosen from 1 choice
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.621917] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.623596] smsc95xx 1-1.1:1.0: usb_probe_interface
Jan 1 00:00:01 buildroot user.debug kernel: [ 2.623626] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
Jan 1 00:00:01 buildroot user.info kernel: [ 2.623748] smsc95xx v1.0.4
Jan 1 00:00:01 buildroot user.info kernel: [ 2.734008] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 4e:11:e8:8d:f6:dc
Jan 1 00:00:01 buildroot user.info kernel: [ 2.787872] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Jan 1 00:00:01 buildroot daemon.info kernel: [ 2.948608] udevd[835]: starting version 182
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'dialout' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'kmem' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'video' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'lp' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'floppy' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'cdrom' unknown
Jan 1 00:00:01 buildroot daemon.err udevd[835]: specified group 'tape' unknown
Jan 1 00:00:01 buildroot daemon.info init: starting pid 862, tty '/dev/ttyO2': '/sbin/getty -L ttyO2 115200 vt100 '
Jan 1 00:00:03 buildroot auth.info login[862]: root login on 'ttyO2'
Jan 1 00:00:07 buildroot user.debug kernel: [ 8.739410] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008
Jan 1 00:00:07 buildroot user.debug kernel: [ 8.739868] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
Jan 1 00:00:07 buildroot user.debug kernel: [ 8.902008] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
Jan 1 00:00:07 buildroot user.info kernel: [ 8.991973] usb 1-1.3: new high-speed USB device number 4 using ehci-omap
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.183105] usb 1-1.3: udev 4, busnum 1, minor = 3
Jan 1 00:00:07 buildroot user.info kernel: [ 9.183135] usb 1-1.3: New USB device found, idVendor=3034, idProduct=7500
Jan 1 00:00:07 buildroot user.info kernel: [ 9.190399] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.199218] usb 1-1.3: usb_probe_device
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.199249] usb 1-1.3: configuration #1 chosen from 1 choice
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.200347] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.201110] usbtest 1-1.3:1.0: usb_probe_interface
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.201110] usbtest 1-1.3:1.0: usb_probe_interface - got id
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.201568] dw2102 1-1.3:1.0: usb_probe_interface
Jan 1 00:00:07 buildroot user.debug kernel: [ 9.201568] dw2102 1-1.3:1.0: usb_probe_interface - got id
Jan 1 00:00:07 buildroot user.info kernel: [ 9.201660] dvb-usb: found a 'Prof 7500 USB DVB-S2' in cold state, will try to load a firmware
Jan 1 00:00:07 buildroot user.info kernel: [ 9.218811] dvb-usb: downloading firmware from file 'dvb-usb-p7500.fw'
Jan 1 00:00:07 buildroot user.info kernel: [ 9.225738] dw2102: start downloading DW210X firmware
Jan 1 00:00:28 buildroot user.info kernel: [ 30.111846] dvb-usb: found a 'Prof 7500 USB DVB-S2' in warm state.
Jan 1 00:00:28 buildroot user.info kernel: [ 30.120178] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 1 00:00:28 buildroot user.info kernel: [ 30.129669] DVB: registering new adapter (Prof 7500 USB DVB-S2)
Jan 1 00:00:28 buildroot user.info kernel: [ 30.135955] dvb-usb: Kishore: Out of dvb_register_adapter
Jan 1 00:00:28 buildroot user.info kernel: [ 30.141662] dvb-usb: Kishore: Entering adap->dev->props.read_mac_address
Jan 1 00:00:28 buildroot user.info kernel: [ 30.148773] dw2102: Kishore: + s6x0_read_mac_address
Jan 1 00:00:28 buildroot user.info kernel: [ 30.148773]
Jan 1 00:00:28 buildroot user.info kernel: [ 30.155609] dw2102: Kishore: 0
Jan 1 00:00:30 buildroot user.debug kernel: [ 32.152709] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:32 buildroot user.debug kernel: [ 34.152221] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:32 buildroot user.info kernel: [ 34.152252] dw2102: Kishore: 1
Jan 1 00:00:34 buildroot user.debug kernel: [ 36.152160] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:36 buildroot user.debug kernel: [ 38.152130] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:36 buildroot user.info kernel: [ 38.152130] dw2102: Kishore: 2
Jan 1 00:00:38 buildroot user.debug kernel: [ 40.152038] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:40 buildroot user.debug kernel: [ 42.152130] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:40 buildroot user.info kernel: [ 42.152160] dw2102: Kishore: 3
Jan 1 00:00:42 buildroot user.debug kernel: [ 44.152069] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:44 buildroot user.debug kernel: [ 46.152069] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:44 buildroot user.info kernel: [ 46.152069] dw2102: Kishore: 4
Jan 1 00:00:46 buildroot user.debug kernel: [ 48.152069] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:48 buildroot user.debug kernel: [ 50.152038] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:48 buildroot user.info kernel: [ 50.152038] dw2102: Kishore: 5
Jan 1 00:00:50 buildroot user.debug kernel: [ 52.152099] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:52 buildroot user.debug kernel: [ 54.152038] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:52 buildroot user.info kernel: [ 54.152069] dw2102: Kishore: 6
Jan 1 00:00:54 buildroot user.debug kernel: [ 56.152130] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:00:56 buildroot user.debug kernel: [ 58.152069] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:00:56 buildroot user.info kernel: [ 58.152099] dw2102: Kishore: 7
Jan 1 00:00:58 buildroot user.debug kernel: [ 60.152008] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:00 buildroot user.debug kernel: [ 62.152099] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:00 buildroot user.info kernel: [ 62.152130] dw2102: Kishore: 8
Jan 1 00:01:02 buildroot user.debug kernel: [ 64.152160] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:04 buildroot user.debug kernel: [ 66.152099] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:04 buildroot user.info kernel: [ 66.152130] dw2102: Kishore: 9
Jan 1 00:01:06 buildroot user.debug kernel: [ 68.152160] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:08 buildroot user.debug kernel: [ 70.152130] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:08 buildroot user.info kernel: [ 70.152130] dw2102: Kishore: 10
Jan 1 00:01:10 buildroot user.debug kernel: [ 72.152069] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:12 buildroot user.debug kernel: [ 74.152160] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:12 buildroot user.info kernel: [ 74.152160] dw2102: Kishore: 11
Jan 1 00:01:14 buildroot user.debug kernel: [ 76.152099] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:16 buildroot user.debug kernel: [ 78.152038] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:16 buildroot user.info kernel: [ 78.152069] dw2102: Kishore: 12
Jan 1 00:01:18 buildroot user.debug kernel: [ 80.152099] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:20 buildroot user.debug kernel: [ 82.152069] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:20 buildroot user.info kernel: [ 82.152099] dw2102: Kishore: 13
Jan 1 00:01:22 buildroot user.debug kernel: [ 84.152008] usb 1-1.3: khubd timed out on ep0out len=0/3
Jan 1 00:01:24 buildroot user.debug kernel: [ 86.152069] usb 1-1.3: khubd timed out on ep0in len=0/1
Jan 1 00:01:24 buildroot user.info kernel: [ 86.152099] dw2102: Kishore: 14
^ permalink raw reply [flat|nested] 10+ messages in thread