public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Antti Palosaari <crope@iki.fi>
To: Luis Alves <ljalvs@gmail.com>, mkrufky@linuxtv.org
Cc: linux-media@vger.kernel.org, mchehab@infradead.org
Subject: Re: [PATCH 1/2] cx24117: Changed the way common data struct was being passed to the demod.
Date: Thu, 03 Oct 2013 01:37:55 +0300	[thread overview]
Message-ID: <524CA043.8080205@iki.fi> (raw)
In-Reply-To: <1380751751-4842-1-git-send-email-ljalvs@gmail.com>

On 03.10.2013 01:09, Luis Alves wrote:
> Hi Mike,
>
> It's done (also tested and apparently working good)!
>
> I didn't know if two separated patches were needed (one for the cx24117 and the other for the cx23885) but I've splited it.
> As you pointed out, this series of patches are to be used against your cx24117 branch.
>
> Regards,
> Luis
>
> Signed-off-by: Luis Alves <ljalvs@gmail.com>

I am not very familiar how that hybrid tuner request works, but it seems 
to be based of driver global list.

I wonder if that works as it should. What happens when you have two 
cx24117 demods equipped, having total of 4 frontends? Does it block 
access only for one demod at the time (as it should block only one per 
chip)?

regards
Antti


> ---
>   drivers/media/dvb-frontends/cx24117.c |   72 +++++++++++++++++++++++----------
>   drivers/media/dvb-frontends/cx24117.h |    4 +-
>   2 files changed, 53 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c
> index 3b63913..9087309 100644
> --- a/drivers/media/dvb-frontends/cx24117.c
> +++ b/drivers/media/dvb-frontends/cx24117.c
> @@ -31,6 +31,7 @@
>   #include <linux/init.h>
>   #include <linux/firmware.h>
>
> +#include "tuner-i2c.h"
>   #include "dvb_frontend.h"
>   #include "cx24117.h"
>
> @@ -145,6 +146,9 @@ enum cmds {
>   	CMD_TUNERSLEEP  = 0x36,
>   };
>
> +static LIST_HEAD(hybrid_tuner_instance_list);
> +static DEFINE_MUTEX(cx24117_list_mutex);
> +
>   /* The Demod/Tuner can't easily provide these, we cache them */
>   struct cx24117_tuning {
>   	u32 frequency;
> @@ -176,9 +180,11 @@ struct cx24117_priv {
>   	u8 demod_address;
>   	struct i2c_adapter *i2c;
>   	u8 skip_fw_load;
> -
>   	struct mutex fe_lock;
> -	atomic_t fe_nr;
> +
> +	/* Used for sharing this struct between demods */
> +	struct tuner_i2c_props i2c_props;
> +	struct list_head hybrid_tuner_instance_list;
>   };
>
>   /* one per each fe */
> @@ -536,7 +542,7 @@ static int cx24117_load_firmware(struct dvb_frontend *fe,
>   	dev_dbg(&state->priv->i2c->dev,
>   		"%s() demod%d FW is %zu bytes (%02x %02x .. %02x %02x)\n",
>   		__func__, state->demod, fw->size, fw->data[0], fw->data[1],
> -		fw->data[fw->size-2], fw->data[fw->size-1]);
> +		fw->data[fw->size - 2], fw->data[fw->size - 1]);
>
>   	cx24117_writereg(state, 0xea, 0x00);
>   	cx24117_writereg(state, 0xea, 0x01);
> @@ -1116,37 +1122,64 @@ static int cx24117_diseqc_send_burst(struct dvb_frontend *fe,
>   	return 0;
>   }
>
> +static int cx24117_get_priv(struct cx24117_priv **priv,
> +	struct i2c_adapter *i2c, u8 client_address)
> +{
> +	int ret;
> +
> +	mutex_lock(&cx24117_list_mutex);
> +	ret = hybrid_tuner_request_state(struct cx24117_priv, (*priv),
> +		hybrid_tuner_instance_list, i2c, client_address, "cx24117");
> +	mutex_unlock(&cx24117_list_mutex);
> +
> +	return ret;
> +}
> +
> +static void cx24117_release_priv(struct cx24117_priv *priv)
> +{
> +	mutex_lock(&cx24117_list_mutex);
> +	if (priv != NULL)
> +		hybrid_tuner_release_state(priv);
> +	mutex_unlock(&cx24117_list_mutex);
> +}
> +
>   static void cx24117_release(struct dvb_frontend *fe)
>   {
>   	struct cx24117_state *state = fe->demodulator_priv;
>   	dev_dbg(&state->priv->i2c->dev, "%s demod%d\n",
>   		__func__, state->demod);
> -	if (!atomic_dec_and_test(&state->priv->fe_nr))
> -		kfree(state->priv);
> +	cx24117_release_priv(state->priv);
>   	kfree(state);
>   }
>
>   static struct dvb_frontend_ops cx24117_ops;
>
>   struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
> -	struct i2c_adapter *i2c, struct dvb_frontend *fe)
> +	struct i2c_adapter *i2c)
>   {
>   	struct cx24117_state *state = NULL;
>   	struct cx24117_priv *priv = NULL;
>   	int demod = 0;
>
> -	/* first frontend attaching */
> -	/* allocate shared priv struct */
> -	if (fe == NULL) {
> -		priv = kzalloc(sizeof(struct cx24117_priv), GFP_KERNEL);
> -		if (priv == NULL)
> -			goto error1;
> +	/* get the common data struct for both demods */
> +	demod = cx24117_get_priv(&priv, i2c, config->demod_address);
> +
> +	switch (demod) {
> +	case 0:
> +		dev_err(&state->priv->i2c->dev,
> +			"%s: Error attaching frontend %d\n",
> +			KBUILD_MODNAME, demod);
> +		goto error1;
> +		break;
> +	case 1:
> +		/* new priv instance */
>   		priv->i2c = i2c;
>   		priv->demod_address = config->demod_address;
>   		mutex_init(&priv->fe_lock);
> -	} else {
> -		demod = 1;
> -		priv = ((struct cx24117_state *) fe->demodulator_priv)->priv;
> +		break;
> +	default:
> +		/* existing priv instance */
> +		break;
>   	}
>
>   	/* allocate memory for the internal state */
> @@ -1154,7 +1187,7 @@ struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
>   	if (state == NULL)
>   		goto error2;
>
> -	state->demod = demod;
> +	state->demod = demod - 1;
>   	state->priv = priv;
>
>   	/* test i2c bus for ack */
> @@ -1163,12 +1196,9 @@ struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
>   			goto error3;
>   	}
>
> -	/* nr of frontends using the module */
> -	atomic_inc(&priv->fe_nr);
> -
>   	dev_info(&state->priv->i2c->dev,
>   		"%s: Attaching frontend %d\n",
> -		KBUILD_MODNAME, demod);
> +		KBUILD_MODNAME, state->demod);
>
>   	/* create dvb_frontend */
>   	memcpy(&state->frontend.ops, &cx24117_ops,
> @@ -1179,7 +1209,7 @@ struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
>   error3:
>   	kfree(state);
>   error2:
> -	kfree(priv);
> +	cx24117_release_priv(priv);
>   error1:
>   	return NULL;
>   }
> diff --git a/drivers/media/dvb-frontends/cx24117.h b/drivers/media/dvb-frontends/cx24117.h
> index 5bc8f11..4e59e95 100644
> --- a/drivers/media/dvb-frontends/cx24117.h
> +++ b/drivers/media/dvb-frontends/cx24117.h
> @@ -33,11 +33,11 @@ struct cx24117_config {
>   #if IS_ENABLED(CONFIG_DVB_CX24117)
>   extern struct dvb_frontend *cx24117_attach(
>   	const struct cx24117_config *config,
> -	struct i2c_adapter *i2c, struct dvb_frontend *fe);
> +	struct i2c_adapter *i2c);
>   #else
>   static inline struct dvb_frontend *cx24117_attach(
>   	const struct cx24117_config *config,
> -	struct i2c_adapter *i2c, struct dvb_frontend *fe)
> +	struct i2c_adapter *i2c)
>   {
>   	dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
>   	return NULL;
>


-- 
http://palosaari.fi/

  parent reply	other threads:[~2013-10-02 22:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-02 22:09 [PATCH 1/2] cx24117: Changed the way common data struct was being passed to the demod Luis Alves
2013-10-02 22:16 ` Mauro Carvalho Chehab
2013-10-02 22:37 ` Antti Palosaari [this message]
2013-10-02 22:54   ` Luis Alves
2013-10-02 23:16     ` Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=524CA043.8080205@iki.fi \
    --to=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=ljalvs@gmail.com \
    --cc=mchehab@infradead.org \
    --cc=mkrufky@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox