From: "Alfredo Jesús Delaiti" <alfredodelaiti@netscape.net>
To: "Miroslav Slugeň" <thunder.mmm@gmail.com>,
linux-media@vger.kernel.org,
"Miroslav Slugeň" <thunder.m@email.cz>
Subject: Re: cx23885: Add basic analog radio support
Date: Fri, 04 Oct 2013 15:56:23 -0300 [thread overview]
Message-ID: <524F0F57.5020605@netscape.net> (raw)
In-Reply-To: <CAEN_-SBR5qGJfUk6h+n04Q4zP-zofiLO+Jr6pOBJU2nqYBuDWQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2361 bytes --]
Hi all
El 14/01/12 15:25, Miroslav Slugeň escribió:
> New version of patch, fixed video modes for DVR3200 tuners and working
> audio mux.
I tested this patch (https://linuxtv.org/patch/9498/) with the latest
versions of git (September 28, 2013) with my TV card (Mygica X8507) and
it works.
I found some issue, although it may be through a bad implementation of mine.
Details of them:
1) Some warning when compiling
...
CC [M]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.o
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1910:8:
: initialization from incompatible pointer type [enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1910:8:
warning: (near initialization for 'radio_ioctl_ops.vidioc_s_tuner')
[enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1911:8:
warning: initialization from incompatible pointer type [enabled by default]
/home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-video.c:1911:8:
warning: (near initialization for 'radio_ioctl_ops.vidioc_s_audio')
[enabled by default]
CC [M] /home/alfredo/ISDB/Nuevo_Driver/git/media_build/v4l/cx23885-vbi.o
...
--------------------------------------------------------
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
.vidioc_s_tuner = radio_s_tuner, /* line 1910 */
.vidioc_s_audio = radio_s_audio, /* line 1911 */
--------------------------------------------------------
2)
No reports signal strength or stereo signal with KRadio. XC5000 neither
reported (modprobe xc5000 debug=1). Maybe a feature XC5000.
To listen in stereo, sometimes, you have to turn on the Digital TV then
Analog TV and then radio.
3)
To listen Analog TV I need changed to NTSC standard and then PAL-Nc (the
norm in my country is PAL-Nc). If I leave the tune in NTSC no problem
with sound.
The patch (https://linuxtv.org/patch/9505/) corrects the latter, if used
tvtime with xawtv not always.
If I see-Digital TV (ISDB-T), then so as to listen the radio I have
first put the TV-Analog, because I hear very low and a strong white noise.
The latter is likely to be corrected by resetting the tuner, I have to
study it more.
I put below attached the patch applied to the plate: X8507.
Have you done any update of this patch?
Thanks
[-- Attachment #2: X8507-radio.patch --]
[-- Type: text/x-patch, Size: 2290 bytes --]
.../media/pci/cx23885/{ => }/media/pci/cx23885/cx23885-cards.c | 6 ++++++
drivers/media/pci/cx23885/{ => }/media/pci/cx23885/cx23885-dvb.c | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 6a71a96..324809a 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -526,16 +526,18 @@ struct cx23885_board cx23885_boards[] = {
.amux = CX25840_AUDIO7,
.gpio0 = 0,
} },
},
[CX23885_BOARD_MYGICA_X8507] = {
.name = "Mygica X8502/X8507 ISDB-T",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
+ .radio_type = TUNER_XC5000,
+ .radio_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
.amux = CX25840_AUDIO8,
@@ -555,16 +557,20 @@ struct cx23885_board cx23885_boards[] = {
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
.amux = CX25840_AUDIO7,
},
},
+ .radio = {
+ .type= CX23885_RADIO,
+ .amux= CX25840_AUDIO8,
+ },
},
[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TEVII_S471] = {
.name = "TeVii S471",
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 971e4ff..4e946b2 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -495,16 +495,17 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
.demod_address = 0x10,
};
static struct xc5000_config mygica_x8507_xc5000_config = {
.i2c_address = 0x61,
.if_khz = 4000,
+ .radio_input = XC5000_RADIO_FM1,
};
static struct stv090x_config prof_8000_stv090x_config = {
.device = STV0903,
.demod_mode = STV090x_SINGLE,
.clk_mode = STV090x_CLK_EXT,
.xtal = 27000000,
.address = 0x6A,
next prev parent reply other threads:[~2013-10-04 19:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-14 18:25 cx23885: Add basic analog radio support Miroslav Slugeň
2012-02-28 17:16 ` Mauro Carvalho Chehab
2013-10-04 18:56 ` Alfredo Jesús Delaiti [this message]
2013-10-19 15:58 ` Miroslav Slugeň
2013-10-22 3:07 ` Alfredo Jesús Delaiti
2013-10-31 10:12 ` Mauro Carvalho Chehab
2013-11-04 17:18 ` Alfredo Jesús Delaiti
2013-11-13 14:52 ` [PATCH 1/2] cx23885 Radio Support [was: cx23885: Add basic analog radio support] Alfredo Jesús Delaiti
2013-12-20 9:54 ` Hans Verkuil
2013-12-22 2:36 ` Alfredo Jesús Delaiti
2013-11-13 15:04 ` [PATCH 2/2] X8502/8507 " Alfredo Jesús Delaiti
-- strict thread matches above, loose matches on Subject: below --
2011-12-17 0:35 cx23885: Add basic analog radio support Miroslav Slugeň
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524F0F57.5020605@netscape.net \
--to=alfredodelaiti@netscape.net \
--cc=linux-media@vger.kernel.org \
--cc=thunder.m@email.cz \
--cc=thunder.mmm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).