From: Beepo / Vanguard <beepo@vanguard.fi>
To: linux-media@vger.kernel.org
Subject: Problem scanning channels with s2-liplianin drivers on Terratec Cynergy C PCI HD
Date: Thu, 23 Jul 2009 16:13:41 +0300 (EEST) [thread overview]
Message-ID: <527169.2191248354821233.JavaMail.root@mail.vanguard.fi> (raw)
In-Reply-To: <5218617.2171248354673889.JavaMail.root@mail.vanguard.fi>
Hi,
Sorry if this is cross posting. I already sent this message to linux-dvb list, but got a bounce from there saying that I should come here instead. So anyway here it goes:
I've been struggling for a while to get the channel scanning to work with my Terratec Cynergy C PCI HD DVB card. I'm using drivers from http://mercurial.intuxication.org/hg/s2-liplianin on Gentoo x86_64 system. Any help is greatly appreciated.
The problem might have something to do with dmesg entry: mantis_ack_wait (0): Slave RACK Fail !
By googling I found some patch for other card with same error message but the patch was quite old and didn't apply to the recent driver source.
I've tried with Gentoo genkernel (2.6.29-gentoo-r5) and with my own configuration (optimized for athlon64)
I've tried dvbscan that comes with gentoo pakage linuxtv-dvb-apps and with http://mercurial.intuxication.org/hg/scan-s2
The s2-liplianin driver for this card has worked with my previous Ubuntu installation few months ago.
I tried to gather as much information about the problem as I could:
http://www.vanguard.fi/terratec/dvbscan_output.txt
http://www.vanguard.fi/terratec/dmesg.txt
http://www.vanguard.fi/terratec/lspci.txt
http://www.vanguard.fi/terratec/emergeinfo.txt
http://www.vanguard.fi/terratec/kernel-config
Thank you in advance!
- Beepo
parent reply other threads:[~2009-07-23 13:24 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <5218617.2171248354673889.JavaMail.root@mail.vanguard.fi>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=527169.2191248354821233.JavaMail.root@mail.vanguard.fi \
--to=beepo@vanguard.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox