From: Sylwester Nawrocki <s.nawrocki@samsung.com>
To: LMML <linux-media@vger.kernel.org>
Subject: [GIT PULL v2] Exynos5 SoC FIMC-IS imaging subsystem driver
Date: Wed, 06 Nov 2013 15:48:20 +0100 [thread overview]
Message-ID: <527A56B4.9010805@samsung.com> (raw)
Hi Mauro,
This change set adds a V4L2 driver for the Exynos5 SoC series camera subsystem.
It also includes a minimal v4l2 subdev driver for s5k4e5 raw image sensor.
Comparing to the original pull request, the DT binding documentation is on
separate patches and some DT binding maintainer acks were added. There were
also some minor cleanups addressing comments from further reviews. I commented
on some further issues [1], I'd like to possibly have them addressed in follow
up patches.
The following changes since commit 80f93c7b0f4599ffbdac8d964ecd1162b8b618b9:
[media] media: st-rc: Add ST remote control driver (2013-10-31 08:20:08 -0200)
are available in the git repository at:
git://linuxtv.org/snawrocki/samsung.git for-v3.13-2
for you to fetch changes up to 1f950a5331ce0297d7549dab3a4827d736f953a4:
V4L: Add s5k4e5 sensor driver (2013-11-06 00:44:57 +0100)
----------------------------------------------------------------
Arun Kumar K (12):
exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
exynos5-fimc-is: Add driver core files
exynos5-fimc-is: Add common driver header files
exynos5-fimc-is: Add register definition and context header
exynos5-fimc-is: Add isp subdev
exynos5-fimc-is: Add scaler subdev
exynos5-fimc-is: Add sensor interface
exynos5-fimc-is: Add the hardware pipeline control
exynos5-fimc-is: Add the hardware interface module
exynos5-is: Add Kconfig and Makefile
V4L: Add DT binding doc for s5k4e5 image sensor
V4L: Add s5k4e5 sensor driver
Shaik Ameer Basha (2):
exynos5-is: Add DT binding documentation
exynos5-is: Add media device driver for exynos5 SoCs camera subsystem
.../devicetree/bindings/media/exynos5-fimc-is.txt | 113 ++
.../bindings/media/exynos5250-camera.txt | 126 ++
.../devicetree/bindings/media/samsung-s5k4e5.txt | 45 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5k4e5.c | 344 ++++
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/exynos5-is/Kconfig | 20 +
drivers/media/platform/exynos5-is/Makefile | 7 +
drivers/media/platform/exynos5-is/exynos5-mdev.c | 1210 ++++++++++++++
drivers/media/platform/exynos5-is/exynos5-mdev.h | 126 ++
drivers/media/platform/exynos5-is/fimc-is-cmd.h | 187 +++
drivers/media/platform/exynos5-is/fimc-is-core.c | 387 +++++
drivers/media/platform/exynos5-is/fimc-is-core.h | 117 ++
drivers/media/platform/exynos5-is/fimc-is-err.h | 257 +++
.../media/platform/exynos5-is/fimc-is-interface.c | 810 ++++++++++
.../media/platform/exynos5-is/fimc-is-interface.h | 124 ++
drivers/media/platform/exynos5-is/fimc-is-isp.c | 533 ++++++
drivers/media/platform/exynos5-is/fimc-is-isp.h | 90 ++
.../media/platform/exynos5-is/fimc-is-metadata.h | 767 +++++++++
drivers/media/platform/exynos5-is/fimc-is-param.h | 1159 +++++++++++++
.../media/platform/exynos5-is/fimc-is-pipeline.c | 1699 ++++++++++++++++++++
.../media/platform/exynos5-is/fimc-is-pipeline.h | 129 ++
drivers/media/platform/exynos5-is/fimc-is-regs.h | 105 ++
drivers/media/platform/exynos5-is/fimc-is-scaler.c | 475 ++++++
drivers/media/platform/exynos5-is/fimc-is-scaler.h | 106 ++
drivers/media/platform/exynos5-is/fimc-is-sensor.c | 45 +
drivers/media/platform/exynos5-is/fimc-is-sensor.h | 65 +
drivers/media/platform/exynos5-is/fimc-is.h | 160 ++
30 files changed, 9217 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
create mode 100644 Documentation/devicetree/bindings/media/exynos5250-camera.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k4e5.txt
create mode 100644 drivers/media/i2c/s5k4e5.c
create mode 100644 drivers/media/platform/exynos5-is/Kconfig
create mode 100644 drivers/media/platform/exynos5-is/Makefile
create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-cmd.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-err.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-interface.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-interface.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-isp.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-isp.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-metadata.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-param.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-pipeline.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-pipeline.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-regs.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-scaler.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-scaler.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-sensor.c
create mode 100644 drivers/media/platform/exynos5-is/fimc-is-sensor.h
create mode 100644 drivers/media/platform/exynos5-is/fimc-is.h
[1] https://patchwork.linuxtv.org/patch/20609/
--
Regards,
Sylwester
reply other threads:[~2013-11-06 14:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=527A56B4.9010805@samsung.com \
--to=s.nawrocki@samsung.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox