Re: [PATCH RFC] libv4lconvert: SDR conversion from U8 to FLOAT

[Hans Verkuil <hverkuil@xs4all.nl>]

On 11/10/2013 06:16 PM, Antti Palosaari wrote:
> Convert unsigned 8 to float 32 [-1 to +1], which is commonly
> used format for baseband signals.
> 
> Signed-off-by: Antti Palosaari <crope@iki.fi>
> ---
>  contrib/freebsd/include/linux/videodev2.h |  4 ++++
>  include/linux/videodev2.h                 |  4 ++++
>  lib/libv4lconvert/libv4lconvert.c         | 29 ++++++++++++++++++++++++++++-
>  3 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/contrib/freebsd/include/linux/videodev2.h b/contrib/freebsd/include/linux/videodev2.h
> index 1fcfaeb..8829400 100644
> --- a/contrib/freebsd/include/linux/videodev2.h
> +++ b/contrib/freebsd/include/linux/videodev2.h
> @@ -465,6 +465,10 @@ struct v4l2_pix_format {
>  #define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
>  #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
>  
> +/* SDR */
> +#define V4L2_PIX_FMT_FLOAT    v4l2_fourcc('D', 'F', '3', '2') /* float 32-bit */
> +#define V4L2_PIX_FMT_U8       v4l2_fourcc('D', 'U', '0', '8') /* unsigned 8-bit */
> +
>  /*
>   *	F O R M A T   E N U M E R A T I O N
>   */
> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
> index 437f1b0..14299a6 100644
> --- a/include/linux/videodev2.h
> +++ b/include/linux/videodev2.h
> @@ -431,6 +431,10 @@ struct v4l2_pix_format {
>  #define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
>  #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
>  
> +/* SDR */
> +#define V4L2_PIX_FMT_FLOAT    v4l2_fourcc('D', 'F', '3', '2') /* float 32-bit */
> +#define V4L2_PIX_FMT_U8       v4l2_fourcc('D', 'U', '0', '8') /* unsigned 8-bit */

I would prefer V4L2_PIX_FMT_SDR_FLOAT and _FMT_SDR_U8.

That way it is clear that this format refers to - and should be interpreted as - an SDR format.

Otherwise it looks fine to me (but it needs to be documented as well, of course).

Regards,

	Hans

> +
>  /*
>   *	F O R M A T   E N U M E R A T I O N
>   */
> diff --git a/lib/libv4lconvert/libv4lconvert.c b/lib/libv4lconvert/libv4lconvert.c
> index e2afc27..38c9125 100644
> --- a/lib/libv4lconvert/libv4lconvert.c
> +++ b/lib/libv4lconvert/libv4lconvert.c
> @@ -78,7 +78,8 @@ static void v4lconvert_get_framesizes(struct v4lconvert_data *data,
>  	{ V4L2_PIX_FMT_RGB24,		24,	 1,	 5,	0 }, \
>  	{ V4L2_PIX_FMT_BGR24,		24,	 1,	 5,	0 }, \
>  	{ V4L2_PIX_FMT_YUV420,		12,	 6,	 1,	0 }, \
> -	{ V4L2_PIX_FMT_YVU420,		12,	 6,	 1,	0 }
> +	{ V4L2_PIX_FMT_YVU420,		12,	 6,	 1,	0 }, \
> +	{ V4L2_PIX_FMT_FLOAT,		 0,	 0,	 0,	0 }
>  
>  static const struct v4lconvert_pixfmt supported_src_pixfmts[] = {
>  	SUPPORTED_DST_PIXFMTS,
> @@ -131,6 +132,8 @@ static const struct v4lconvert_pixfmt supported_src_pixfmts[] = {
>  	{ V4L2_PIX_FMT_Y6,		 8,	20,	20,	0 },
>  	{ V4L2_PIX_FMT_Y10BPACK,	10,	20,	20,	0 },
>  	{ V4L2_PIX_FMT_Y16,		16,	20,	20,	0 },
> +	/* SDR formats */
> +	{ V4L2_PIX_FMT_U8,		0,	0,	0,	0 },
>  };
>  
>  static const struct v4lconvert_pixfmt supported_dst_pixfmts[] = {
> @@ -1281,6 +1284,25 @@ static int v4lconvert_convert_pixfmt(struct v4lconvert_data *data,
>  		}
>  		break;
>  
> +	/* SDR */
> +	case V4L2_PIX_FMT_U8:
> +		switch (dest_pix_fmt) {
> +		case V4L2_PIX_FMT_FLOAT:
> +			{
> +				/* 8-bit unsigned to 32-bit float */
> +				unsigned int i;
> +				float ftmp;
> +				for (i = 0; i < src_size; i++) {
> +					ftmp = *src++;
> +					ftmp -= 127.5;
> +					ftmp /= 127.5;
> +					memcpy(dest, &ftmp, 4);
> +					dest += 4;
> +				}
> +			}
> +		}
> +		break;
> +
>  	default:
>  		V4LCONVERT_ERR("Unknown src format in conversion\n");
>  		errno = EINVAL;
> @@ -1349,6 +1371,11 @@ int v4lconvert_convert(struct v4lconvert_data *data,
>  		temp_needed =
>  			my_src_fmt.fmt.pix.width * my_src_fmt.fmt.pix.height * 3 / 2;
>  		break;
> +	/* SDR */
> +	case V4L2_PIX_FMT_FLOAT:
> +		dest_needed = src_size * 4; /* 8-bit to 32-bit */
> +		temp_needed = dest_needed;
> +		break;
>  	default:
>  		V4LCONVERT_ERR("Unknown dest format in conversion\n");
>  		errno = EINVAL;
>