From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from omr-m02.mx.aol.com ([64.12.143.76]:61919 "EHLO omr-m02.mx.aol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756483Ab3KMPhn (ORCPT ); Wed, 13 Nov 2013 10:37:43 -0500 Message-ID: <52839505.6090700@netscape.net> Date: Wed, 13 Nov 2013 12:04:37 -0300 From: =?UTF-8?B?QWxmcmVkbyBKZXPDunMgRGVsYWl0aQ==?= MIME-Version: 1.0 To: Mauro Carvalho Chehab CC: linux-media@vger.kernel.org Subject: [PATCH 2/2] X8502/8507 Radio Support [was: cx23885: Add basic analog radio support] References: <524F0F57.5020605@netscape.net> <20131031081255.65111ad6@samsung.com> In-Reply-To: <20131031081255.65111ad6@samsung.com> Content-Type: multipart/mixed; boundary="------------060603000207060803040801" Sender: linux-media-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------060603000207060803040801 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Hi Mauro and all El 31/10/13 07:12, Mauro Carvalho Chehab escribió: > Hi Alfredo, My understanding is that the patch you've enclosed is > incomplete and depends on Miroslav's patch. As he have you his ack to > rework on it, could you please prepare a patch series addressing the > above comments for us to review? Than I tested this patch with the latest versions of git. I found some issue, although it may be through a bad implementation of mine. Details of them: 1) No reports signal strength or stereo signal with KRadio. XC5000 neither reported (modprobe xc5000 debug=1). Maybe a feature XC5000. To listen in stereo, sometimes, you have to turn on the Digital TV then Analog TV and then radio. 2) To listen Analog TV I need changed to NTSC standard and then PAL-Nc (the norm in my country is PAL-Nc). If I leave the tune in NTSC no problem with sound. The patch (https://linuxtv.org/patch/9505/) corrects the latter, but not always. 3) If I see-Digital TV (ISDB-T), then so as to listen the radio I have first put the TV-Analog, because I hear very low and a strong white noise. The latter is likely to be corrected by resetting the tuner, but I have not been able to do. Thank you, Alfredo Signed-off-by: Alfredo J. Delaiti --------------060603000207060803040801 Content-Type: text/x-patch; name="Radio_X8507.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="Radio_X8507.patch" diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 79f20c8..f97002a 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -574,6 +574,8 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8502/X8507 ISDB-T", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .radio_type = TUNER_XC5000, + .radio_addr = 0x61, .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, @@ -603,6 +605,10 @@ struct cx23885_board cx23885_boards[] = { .amux = CX25840_AUDIO7, }, }, + .radio = { + .type= CX23885_RADIO, + .amux= CX25840_AUDIO8, + }, }, [CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = { .name = "TerraTec Cinergy T PCIe Dual", diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 0549205..b09d97f 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -505,6 +505,7 @@ static struct mb86a20s_config mygica_x8507_mb86a20s_config = { static struct xc5000_config mygica_x8507_xc5000_config = { .i2c_address = 0x61, .if_khz = 4000, + .radio_input = XC5000_RADIO_FM1, }; static struct stv090x_config prof_8000_stv090x_config = { --------------060603000207060803040801--