* Questions on how to add support for DVB-C/T on HVR4400 and HVR5500
@ 2013-12-20 5:58 Matthias Schwarzott
0 siblings, 0 replies; only message in thread
From: Matthias Schwarzott @ 2013-12-20 5:58 UTC (permalink / raw)
To: Michael Krufky, linux-media; +Cc: Sven Müller
Hi there,
I am trying to also add support for for using SI2165 driver on HVR4400
and HVR5500 cards.
The pci subdevice id of the HVR5500 (0x0070:0xc138) is assigned to
HVR4400 in cx23885-cards.c.
Is that just because the DVB-S2 part is identical, to not add redundant
code? In this case I could just modify it to a new HVR5500 enum value.
How is a second demod wired to cx23885 in this case? Is this done via
another port, so portb for DVB-S/S2 and portc for DVB-C/T?
On HVR5500, there is a device at i2c addr 0x60, this could either be a
tuner (NXP 18271C2?) or the demod SI2165.
Or is there a need to change gpio values to get the demod out of the reset?
Does the HVR4400 contain a SI2161 demod? I cannot read the name on the
pictures, but it looks very similar the SI2165.
Regards
Matthias
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-12-20 5:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-20 5:58 Questions on how to add support for DVB-C/T on HVR4400 and HVR5500 Matthias Schwarzott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox