From: Hans Verkuil <hverkuil@xs4all.nl>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org,
Hans Verkuil <hans.verkuil@cisco.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Kyungmin Park <kyungmin.park@samsung.com>,
Tomasz Stanislawski <t.stanislaws@samsung.com>,
Scott Jiang <scott.jiang.linux@gmail.com>,
Prabhakar Lad <prabhakar.csengg@gmail.com>
Subject: Re: [PATCH 00/47] ADV7611 support
Date: Wed, 05 Feb 2014 18:12:37 +0100 [thread overview]
Message-ID: <52F27105.6020901@xs4all.nl> (raw)
In-Reply-To: <1391618558-5580-1-git-send-email-laurent.pinchart@ideasonboard.com>
Hi Laurent!
On 02/05/2014 05:41 PM, Laurent Pinchart wrote:
> Hello,
>
> This patch set implements support for the ADV7611 in the adv7604 driver. It
> also comes up with new features such as output format configuration through
> pad format operations, hot-plug detect control through GPIO and DT support.
>
> Patches 06/47 to 27/47 replace the subdev video DV timings query cap and enum
> operations with pad-level equivalents. I've split driver changes in one patch
> per driver to make review easier, but I can squash them together if desired.
For patches 2-5 and 7-26:
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
I have some upcoming comments for patches 6 and 27 and I don't feel qualified
enough to judge patch 1 (unless you ask explicitly).
I will look at the remaining adv7604 patches later. I need to test those on
our hardware, so this will probably going to be next week before I get to them.
Nothing jumped out at me when I quickly read through them, but I didn't
look all that closely.
Regards,
Hans
>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Tomasz Stanislawski <t.stanislaws@samsung.com>
> Cc: Scott Jiang <scott.jiang.linux@gmail.com>
> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
>
> Lars-Peter Clausen (4):
> adv7604: Add missing include to linux/types.h
> adv7604: Add support for asynchronous probing
> adv7604: Don't put info string arrays on the stack
> adv7604: Add adv7611 support
>
> Laurent Pinchart (43):
> v4l: of: Support empty port nodes
> v4l: Add UYVY10_2X10 and VYUY10_2X10 media bus pixel codes
> v4l: Add UYVY10_1X20 and VYUY10_1X20 media bus pixel codes
> v4l: Add 12-bit YUV 4:2:0 media bus pixel codes
> v4l: Add 12-bit YUV 4:2:2 media bus pixel codes
> v4l: Add pad-level DV timings subdev operations
> ad9389b: Add pad-level DV timings operations
> adv7511: Add pad-level DV timings operations
> adv7842: Add pad-level DV timings operations
> s5p-tv: hdmi: Add pad-level DV timings operations
> s5p-tv: hdmiphy: Add pad-level DV timings operations
> ths8200: Add pad-level DV timings operations
> tvp7002: Add pad-level DV timings operations
> media: bfin_capture: Switch to pad-level DV operations
> media: davinci: vpif: Switch to pad-level DV operations
> media: staging: davinci: vpfe: Switch to pad-level DV operations
> s5p-tv: mixer: Switch to pad-level DV operations
> ad9389b: Remove deprecated video-level DV timings operations
> adv7511: Remove deprecated video-level DV timings operations
> adv7842: Remove deprecated video-level DV timings operations
> s5p-tv: hdmi: Remove deprecated video-level DV timings operations
> s5p-tv: hdmiphy: Remove deprecated video-level DV timings operation
> ths8200: Remove deprecated video-level DV timings operations
> tvp7002: Remove deprecated video-level DV timings operations
> v4l: subdev: Remove deprecated video-level DV timings operations
> v4l: Improve readability by not wrapping ioctl number #define's
> v4l: Add support for DV timings ioctls on subdev nodes
> adv7604: Add 16-bit read functions for CP and HDMI
> adv7604: Cache register contents when reading multiple bits
> adv7604: Remove subdev control handlers
> adv7604: Add sink pads
> adv7604: Make output format configurable through pad format operations
> adv7604: Add pad-level DV timings support
> adv7604: Remove deprecated video-level DV timings operations
> adv7604: Inline the to_sd function
> adv7604: Store I2C addresses and clients in arrays
> adv7604: Replace *_and_or() functions with *_clr_set()
> adv7604: Sort headers alphabetically
> adv7604: Control hot-plug detect through a GPIO
> adv7604: Specify the default input through platform data
> adv7604: Add DT support
> adv7604: Add LLC polarity configuration
> adv7604: Add endpoint properties to DT bindings
>
> Documentation/DocBook/media/v4l/subdev-formats.xml | 760 ++++++++++
> .../DocBook/media/v4l/vidioc-dv-timings-cap.xml | 27 +-
> .../DocBook/media/v4l/vidioc-enum-dv-timings.xml | 27 +-
> .../devicetree/bindings/media/i2c/adv7604.txt | 69 +
> drivers/media/i2c/ad9389b.c | 67 +-
> drivers/media/i2c/adv7511.c | 69 +-
> drivers/media/i2c/adv7604.c | 1465 ++++++++++++++------
> drivers/media/i2c/adv7842.c | 10 +-
> drivers/media/i2c/ths8200.c | 10 +
> drivers/media/i2c/tvp7002.c | 5 +-
> drivers/media/platform/blackfin/bfin_capture.c | 4 +-
> drivers/media/platform/davinci/vpif_capture.c | 4 +-
> drivers/media/platform/davinci/vpif_display.c | 4 +-
> drivers/media/platform/s5p-tv/hdmi_drv.c | 14 +-
> drivers/media/platform/s5p-tv/hdmiphy_drv.c | 9 +-
> drivers/media/platform/s5p-tv/mixer_video.c | 8 +-
> drivers/media/v4l2-core/v4l2-of.c | 52 +-
> drivers/media/v4l2-core/v4l2-subdev.c | 15 +
> drivers/staging/media/davinci_vpfe/vpfe_video.c | 4 +-
> include/media/adv7604.h | 109 +-
> include/media/v4l2-subdev.h | 8 +-
> include/uapi/linux/v4l2-mediabus.h | 14 +-
> include/uapi/linux/v4l2-subdev.h | 38 +-
> include/uapi/linux/videodev2.h | 8 +-
> 24 files changed, 2164 insertions(+), 636 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/adv7604.txt
>
prev parent reply other threads:[~2014-02-05 17:13 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 16:41 [PATCH 00/47] ADV7611 support Laurent Pinchart
2014-02-05 16:41 ` [PATCH 01/47] v4l: of: Support empty port nodes Laurent Pinchart
2014-02-05 16:41 ` [PATCH 02/47] v4l: Add UYVY10_2X10 and VYUY10_2X10 media bus pixel codes Laurent Pinchart
2014-02-05 16:41 ` [PATCH 03/47] v4l: Add UYVY10_1X20 and VYUY10_1X20 " Laurent Pinchart
2014-02-05 16:41 ` [PATCH 04/47] v4l: Add 12-bit YUV 4:2:0 " Laurent Pinchart
2014-02-05 16:41 ` [PATCH 05/47] v4l: Add 12-bit YUV 4:2:2 " Laurent Pinchart
2014-02-05 16:41 ` [PATCH 06/47] v4l: Add pad-level DV timings subdev operations Laurent Pinchart
2014-02-05 17:13 ` Hans Verkuil
2014-02-06 17:33 ` Sakari Ailus
2014-02-07 0:50 ` Laurent Pinchart
2014-02-05 16:41 ` [PATCH 07/47] ad9389b: Add pad-level DV timings operations Laurent Pinchart
2014-02-05 16:41 ` [PATCH 08/47] adv7511: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 09/47] adv7842: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 10/47] s5p-tv: hdmi: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 11/47] s5p-tv: hdmiphy: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 12/47] ths8200: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 13/47] tvp7002: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 14/47] media: bfin_capture: Switch to pad-level DV operations Laurent Pinchart
2014-02-05 16:42 ` [PATCH 15/47] media: davinci: vpif: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 16/47] media: staging: davinci: vpfe: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 17/47] s5p-tv: mixer: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 18/47] ad9389b: Remove deprecated video-level DV timings operations Laurent Pinchart
2014-02-05 16:42 ` [PATCH 19/47] adv7511: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 20/47] adv7842: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 21/47] s5p-tv: hdmi: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 22/47] s5p-tv: hdmiphy: Remove deprecated video-level DV timings operation Laurent Pinchart
2014-02-05 16:42 ` [PATCH 23/47] ths8200: Remove deprecated video-level DV timings operations Laurent Pinchart
2014-02-05 16:42 ` [PATCH 24/47] tvp7002: " Laurent Pinchart
2014-02-05 16:42 ` [PATCH 25/47] v4l: subdev: " Laurent Pinchart
2014-02-06 17:35 ` Sakari Ailus
2014-02-12 12:48 ` Hans Verkuil
2014-02-05 16:42 ` [PATCH 26/47] v4l: Improve readability by not wrapping ioctl number #define's Laurent Pinchart
2014-02-06 17:34 ` Sakari Ailus
2014-02-05 16:42 ` [PATCH 27/47] v4l: Add support for DV timings ioctls on subdev nodes Laurent Pinchart
2014-02-05 17:31 ` Hans Verkuil
2014-02-07 1:21 ` Laurent Pinchart
2014-02-07 11:07 ` Sakari Ailus
2014-02-10 12:53 ` Laurent Pinchart
2014-02-05 16:42 ` [PATCH 28/47] adv7604: Add missing include to linux/types.h Laurent Pinchart
2014-02-05 16:42 ` [PATCH 29/47] adv7604: Add support for asynchronous probing Laurent Pinchart
2014-02-05 16:42 ` [PATCH 30/47] adv7604: Don't put info string arrays on the stack Laurent Pinchart
2014-02-05 16:42 ` [PATCH 31/47] adv7604: Add 16-bit read functions for CP and HDMI Laurent Pinchart
2014-02-05 16:42 ` [PATCH 32/47] adv7604: Cache register contents when reading multiple bits Laurent Pinchart
2014-02-05 16:42 ` [PATCH 33/47] adv7604: Add adv7611 support Laurent Pinchart
2014-02-05 16:42 ` [PATCH 34/47] adv7604: Remove subdev control handlers Laurent Pinchart
2014-02-05 16:42 ` [PATCH 35/47] adv7604: Add sink pads Laurent Pinchart
2014-02-11 10:19 ` Hans Verkuil
2014-02-11 12:00 ` Laurent Pinchart
2014-02-11 12:07 ` Hans Verkuil
2014-02-11 12:23 ` Laurent Pinchart
2014-02-11 12:24 ` Hans Verkuil
2014-02-11 12:32 ` Laurent Pinchart
2014-02-11 12:33 ` Hans Verkuil
2014-02-05 16:42 ` [PATCH 36/47] adv7604: Make output format configurable through pad format operations Laurent Pinchart
2014-02-12 15:01 ` Hans Verkuil
2014-03-10 22:43 ` Laurent Pinchart
2014-03-11 9:05 ` Hans Verkuil
2014-03-11 11:16 ` Laurent Pinchart
2014-03-11 11:29 ` Hans Verkuil
2014-02-05 16:42 ` [PATCH 37/47] adv7604: Add pad-level DV timings support Laurent Pinchart
2014-02-05 16:42 ` [PATCH 38/47] adv7604: Remove deprecated video-level DV timings operations Laurent Pinchart
2014-02-05 16:42 ` [PATCH 39/47] adv7604: Inline the to_sd function Laurent Pinchart
2014-02-05 16:42 ` [PATCH 40/47] adv7604: Store I2C addresses and clients in arrays Laurent Pinchart
2014-02-05 16:42 ` [PATCH 41/47] adv7604: Replace *_and_or() functions with *_clr_set() Laurent Pinchart
2014-02-05 16:42 ` [PATCH 42/47] adv7604: Sort headers alphabetically Laurent Pinchart
2014-02-05 16:42 ` [PATCH 43/47] adv7604: Control hot-plug detect through a GPIO Laurent Pinchart
2014-02-06 13:10 ` Lars-Peter Clausen
2014-02-10 15:00 ` Laurent Pinchart
2014-02-11 10:09 ` Hans Verkuil
2014-02-11 12:03 ` Laurent Pinchart
2014-02-13 9:47 ` Hans Verkuil
2014-02-13 10:10 ` Lars-Peter Clausen
2014-02-13 14:33 ` Laurent Pinchart
2014-02-05 16:42 ` [PATCH 44/47] adv7604: Specify the default input through platform data Laurent Pinchart
2014-02-05 16:42 ` [PATCH 45/47] adv7604: Add DT support Laurent Pinchart
2014-02-11 9:23 ` Hans Verkuil
2014-02-11 12:08 ` Laurent Pinchart
2014-02-11 12:14 ` Hans Verkuil
2014-02-11 12:21 ` Lars-Peter Clausen
2014-02-11 12:30 ` Laurent Pinchart
2014-02-05 16:42 ` [PATCH 46/47] adv7604: Add LLC polarity configuration Laurent Pinchart
2014-02-05 16:42 ` [PATCH 47/47] adv7604: Add endpoint properties to DT bindings Laurent Pinchart
2014-02-05 17:12 ` Hans Verkuil [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F27105.6020901@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=hans.verkuil@cisco.com \
--cc=kyungmin.park@samsung.com \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=prabhakar.csengg@gmail.com \
--cc=scott.jiang.linux@gmail.com \
--cc=t.stanislaws@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox