public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
* [linuxtv-media:sdr 488/499] drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch
@ 2014-02-07 14:52 kbuild test robot
  2014-02-07 23:05 ` Antti Palosaari
  0 siblings, 1 reply; 2+ messages in thread
From: kbuild test robot @ 2014-02-07 14:52 UTC (permalink / raw)
  To: Antti Palosaari; +Cc: linux-media, Mauro Carvalho Chehab, kbuild-all

tree:   git://linuxtv.org/media_tree.git sdr
head:   11532660e6f5b6b3a74a03f999d878f35d2cc668
commit: 6b200814f9eaac45ad816da459e31534b576c37b [488/499] [media] v4l: add new tuner types for SDR
config: make ARCH=powerpc allmodconfig

All warnings:

   drivers/media/tuners/tuner-xc2028.c: In function 'generic_set_freq':
>> drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch [-Wswitch]
     switch (new_type) {
     ^
>> drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_RF' not handled in switch [-Wswitch]

vim +/V4L2_TUNER_ADC +1037 drivers/media/tuners/tuner-xc2028.c

7e28adb2 drivers/media/video/tuner-xc2028.c         Harvey Harrison       2008-04-08  1021  	tuner_dbg("%s called\n", __func__);
215b95ba drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-23  1022  
de3fe21b drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-24  1023  	mutex_lock(&priv->lock);
de3fe21b drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-24  1024  
2ce4b3aa drivers/media/video/tuner-xc2028.c         Chris Pascoe          2007-11-19  1025  	tuner_dbg("should set frequency %d kHz\n", freq / 1000);
6cb45879 drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-02  1026  
66c2d53d drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-25  1027  	if (check_firmware(fe, type, std, int_freq) < 0)
3b20532c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-09-27  1028  		goto ret;
2e4160ca drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-07-18  1029  
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1030  	/* On some cases xc2028 can disable video output, if
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1031  	 * very weak signals are received. By sending a soft
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1032  	 * reset, this is re-enabled. So, it is better to always
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1033  	 * send a soft reset before changing channels, to be sure
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1034  	 * that xc2028 will be in a safe state.
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1035  	 * Maybe this might also be needed for DTV.
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1036  	 */
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31 @1037  	switch (new_type) {
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1038  	case V4L2_TUNER_ANALOG_TV:
2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1039  		rc = send_seq(priv, {0x00, 0x00});
0a863975 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2009-06-01  1040  
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1041  		/* Analog mode requires offset = 0 */
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1042  		break;
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1043  	case V4L2_TUNER_RADIO:
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1044  		/* Radio mode requires offset = 0 */
fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1045  		break;

:::::: The code at line 1037 was first introduced by commit
:::::: fd34cb08babcd898c6b0e30cd7d507ffa62685a1 [media] tuner/xc2028: Fix frequency offset for radio mode

:::::: TO: Mauro Carvalho Chehab <mchehab@redhat.com>
:::::: CC: Mauro Carvalho Chehab <mchehab@redhat.com>

---
0-DAY kernel build testing backend              Open Source Technology Center
http://lists.01.org/mailman/listinfo/kbuild                 Intel Corporation

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: [linuxtv-media:sdr 488/499] drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch
  2014-02-07 14:52 [linuxtv-media:sdr 488/499] drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch kbuild test robot
@ 2014-02-07 23:05 ` Antti Palosaari
  0 siblings, 0 replies; 2+ messages in thread
From: Antti Palosaari @ 2014-02-07 23:05 UTC (permalink / raw)
  To: kbuild test robot; +Cc: linux-media, Mauro Carvalho Chehab, kbuild-all

Moikka
That is already fixed. I will pull next set of SDR patches next week.
https://patchwork.linuxtv.org/patch/21887/

regards
Antti


On 07.02.2014 16:52, kbuild test robot wrote:
> tree:   git://linuxtv.org/media_tree.git sdr
> head:   11532660e6f5b6b3a74a03f999d878f35d2cc668
> commit: 6b200814f9eaac45ad816da459e31534b576c37b [488/499] [media] v4l: add new tuner types for SDR
> config: make ARCH=powerpc allmodconfig
>
> All warnings:
>
>     drivers/media/tuners/tuner-xc2028.c: In function 'generic_set_freq':
>>> drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch [-Wswitch]
>       switch (new_type) {
>       ^
>>> drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_RF' not handled in switch [-Wswitch]
>
> vim +/V4L2_TUNER_ADC +1037 drivers/media/tuners/tuner-xc2028.c
>
> 7e28adb2 drivers/media/video/tuner-xc2028.c         Harvey Harrison       2008-04-08  1021  	tuner_dbg("%s called\n", __func__);
> 215b95ba drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-23  1022
> de3fe21b drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-24  1023  	mutex_lock(&priv->lock);
> de3fe21b drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-24  1024
> 2ce4b3aa drivers/media/video/tuner-xc2028.c         Chris Pascoe          2007-11-19  1025  	tuner_dbg("should set frequency %d kHz\n", freq / 1000);
> 6cb45879 drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-10-02  1026
> 66c2d53d drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-25  1027  	if (check_firmware(fe, type, std, int_freq) < 0)
> 3b20532c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-09-27  1028  		goto ret;
> 2e4160ca drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-07-18  1029
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1030  	/* On some cases xc2028 can disable video output, if
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1031  	 * very weak signals are received. By sending a soft
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1032  	 * reset, this is re-enabled. So, it is better to always
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1033  	 * send a soft reset before changing channels, to be sure
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1034  	 * that xc2028 will be in a safe state.
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1035  	 * Maybe this might also be needed for DTV.
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1036  	 */
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31 @1037  	switch (new_type) {
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1038  	case V4L2_TUNER_ANALOG_TV:
> 2800ae9c drivers/media/video/tuner-xc2028.c         Mauro Carvalho Chehab 2007-11-22  1039  		rc = send_seq(priv, {0x00, 0x00});
> 0a863975 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2009-06-01  1040
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1041  		/* Analog mode requires offset = 0 */
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1042  		break;
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1043  	case V4L2_TUNER_RADIO:
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1044  		/* Radio mode requires offset = 0 */
> fd34cb08 drivers/media/common/tuners/tuner-xc2028.c Mauro Carvalho Chehab 2011-08-31  1045  		break;
>
> :::::: The code at line 1037 was first introduced by commit
> :::::: fd34cb08babcd898c6b0e30cd7d507ffa62685a1 [media] tuner/xc2028: Fix frequency offset for radio mode
>
> :::::: TO: Mauro Carvalho Chehab <mchehab@redhat.com>
> :::::: CC: Mauro Carvalho Chehab <mchehab@redhat.com>
>
> ---
> 0-DAY kernel build testing backend              Open Source Technology Center
> http://lists.01.org/mailman/listinfo/kbuild                 Intel Corporation
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
http://palosaari.fi/

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-07 23:05 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-07 14:52 [linuxtv-media:sdr 488/499] drivers/media/tuners/tuner-xc2028.c:1037:2: warning: enumeration value 'V4L2_TUNER_ADC' not handled in switch kbuild test robot
2014-02-07 23:05 ` Antti Palosaari

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox