From: Hans Verkuil <hverkuil@xs4all.nl>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
Antti Palosaari <crope@iki.fi>
Subject: [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues
Date: Thu, 06 Mar 2014 00:21:38 +0100 [thread overview]
Message-ID: <5317B182.8050200@xs4all.nl> (raw)
Antti,
Attached is a patch that fixed all but one v4l2-compliance error:
fail: v4l2-test-controls.cpp(295): returned control value out of range
fail: v4l2-test-controls.cpp(357): invalid control 00a2090c
test VIDIOC_G/S_CTRL: FAIL
fail: v4l2-test-controls.cpp(465): returned control value out of range
fail: v4l2-test-controls.cpp(573): invalid control 00a2090c
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
That's the BANDWIDTH control and it returned value 3200000 when the minimum was 6000000.
I couldn't trace where that came from in the limited time I spent on it, I expect you
can find it much quicker.
I did my testing with this tree:
http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/sdr
which is a merge of your tree:
http://git.linuxtv.org/media-tree.git/shortlog/refs/heads/sdr
and my ongoing vb2-fixes tree:
http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/vb2-part4
I leave it to you to process this patch further.
Regards,
Hans
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
index ac487cb..3013305 100644
--- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
+++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
@@ -120,6 +120,7 @@ struct rtl2832_sdr_state {
struct vb2_queue vb_queue;
struct list_head queued_bufs;
spinlock_t queued_bufs_lock; /* Protects queued_bufs */
+ unsigned sequence; /* buffer sequence counter */
/* Note if taking both locks v4l2_lock must always be locked first! */
struct mutex v4l2_lock; /* Protects everything else */
@@ -415,6 +416,8 @@ static void rtl2832_sdr_urb_complete(struct urb *urb)
len = rtl2832_sdr_convert_stream(s, ptr, urb->transfer_buffer,
urb->actual_length);
vb2_set_plane_payload(&fbuf->vb, 0, len);
+ v4l2_get_timestamp(&fbuf->vb.v4l2_buf.timestamp);
+ fbuf->vb.v4l2_buf.sequence = s->sequence++;
vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE);
}
skip:
@@ -611,8 +614,9 @@ static int rtl2832_sdr_queue_setup(struct vb2_queue *vq,
struct rtl2832_sdr_state *s = vb2_get_drv_priv(vq);
dev_dbg(&s->udev->dev, "%s: *nbuffers=%d\n", __func__, *nbuffers);
- /* Absolute min and max number of buffers available for mmap() */
- *nbuffers = clamp_t(unsigned int, *nbuffers, 8, 32);
+ /* Need at least 8 buffers */
+ if (vq->num_buffers + *nbuffers < 8)
+ *nbuffers = 8 - vq->num_buffers;
*nplanes = 1;
/* 2 = max 16-bit sample returned */
sizes[0] = PAGE_ALIGN(BULK_BUFFER_SIZE * 2);
@@ -1013,6 +1017,8 @@ static int rtl2832_sdr_start_streaming(struct vb2_queue *vq, unsigned int count)
if (ret)
goto err;
+ s->sequence = 0;
+
ret = rtl2832_sdr_submit_urbs(s);
if (ret)
goto err;
@@ -1087,6 +1093,8 @@ static int rtl2832_sdr_s_tuner(struct file *file, void *priv,
struct rtl2832_sdr_state *s = video_drvdata(file);
dev_dbg(&s->udev->dev, "%s:\n", __func__);
+ if (v->index > 1)
+ return -EINVAL;
return 0;
}
@@ -1122,12 +1130,15 @@ static int rtl2832_sdr_g_frequency(struct file *file, void *priv,
dev_dbg(&s->udev->dev, "%s: tuner=%d type=%d\n",
__func__, f->tuner, f->type);
- if (f->tuner == 0)
+ if (f->tuner == 0) {
f->frequency = s->f_adc;
- else if (f->tuner == 1)
+ f->type = V4L2_TUNER_ADC;
+ } else if (f->tuner == 1) {
f->frequency = s->f_tuner;
- else
+ f->type = V4L2_TUNER_RF;
+ } else {
return -EINVAL;
+ }
return ret;
}
@@ -1161,7 +1172,9 @@ static int rtl2832_sdr_s_frequency(struct file *file, void *priv,
__func__, s->f_adc);
ret = rtl2832_sdr_set_adc(s);
} else if (f->tuner == 1) {
- s->f_tuner = f->frequency;
+ s->f_tuner = clamp_t(unsigned int, f->frequency,
+ bands_fm[0].rangelow,
+ bands_fm[0].rangehigh);
dev_dbg(&s->udev->dev, "%s: RF frequency=%u Hz\n",
__func__, f->frequency);
@@ -1195,6 +1208,7 @@ static int rtl2832_sdr_g_fmt_sdr_cap(struct file *file, void *priv,
dev_dbg(&s->udev->dev, "%s:\n", __func__);
f->fmt.sdr.pixelformat = s->pixelformat;
+ memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
return 0;
}
@@ -1211,6 +1225,7 @@ static int rtl2832_sdr_s_fmt_sdr_cap(struct file *file, void *priv,
if (vb2_is_busy(q))
return -EBUSY;
+ memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
for (i = 0; i < NUM_FORMATS; i++) {
if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
s->pixelformat = f->fmt.sdr.pixelformat;
@@ -1232,6 +1247,7 @@ static int rtl2832_sdr_try_fmt_sdr_cap(struct file *file, void *priv,
dev_dbg(&s->udev->dev, "%s: pixelformat fourcc %4.4s\n", __func__,
(char *)&f->fmt.sdr.pixelformat);
+ memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
for (i = 0; i < NUM_FORMATS; i++) {
if (formats[i].pixelformat == f->fmt.sdr.pixelformat)
return 0;
@@ -1362,6 +1378,7 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
s->i2c = i2c;
s->cfg = cfg;
s->f_adc = bands_adc[0].rangelow;
+ s->f_tuner = bands_fm[0].rangelow;
s->pixelformat = V4L2_SDR_FMT_CU8;
mutex_init(&s->v4l2_lock);
next reply other threads:[~2014-03-05 23:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-05 23:21 Hans Verkuil [this message]
2014-03-10 10:36 ` [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues Antti Palosaari
2014-03-10 15:29 ` Antti Palosaari
2014-03-10 15:36 ` Hans Verkuil
2014-03-10 15:40 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5317B182.8050200@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox