From: Antti Palosaari <crope@iki.fi>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues
Date: Mon, 10 Mar 2014 12:36:03 +0200 [thread overview]
Message-ID: <531D9593.8010902@iki.fi> (raw)
In-Reply-To: <5317B182.8050200@xs4all.nl>
Moikka Hans!
I will look these issues today. Actually I forget to ran whole
v4l2-compliance after I added these controls... I ran it for basic API
and it failed there too in many places, IIRC mostly those were related
to new tuner types.
regards
Antti
On 06.03.2014 01:21, Hans Verkuil wrote:
> Antti,
>
> Attached is a patch that fixed all but one v4l2-compliance error:
>
> fail: v4l2-test-controls.cpp(295): returned control value out of range
> fail: v4l2-test-controls.cpp(357): invalid control 00a2090c
> test VIDIOC_G/S_CTRL: FAIL
> fail: v4l2-test-controls.cpp(465): returned control value out of range
> fail: v4l2-test-controls.cpp(573): invalid control 00a2090c
> test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
>
> That's the BANDWIDTH control and it returned value 3200000 when the minimum was 6000000.
> I couldn't trace where that came from in the limited time I spent on it, I expect you
> can find it much quicker.
>
> I did my testing with this tree:
>
> http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/sdr
>
> which is a merge of your tree:
>
> http://git.linuxtv.org/media-tree.git/shortlog/refs/heads/sdr
>
> and my ongoing vb2-fixes tree:
>
> http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/vb2-part4
>
> I leave it to you to process this patch further.
>
> Regards,
>
> Hans
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
>
> diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> index ac487cb..3013305 100644
> --- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> +++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> @@ -120,6 +120,7 @@ struct rtl2832_sdr_state {
> struct vb2_queue vb_queue;
> struct list_head queued_bufs;
> spinlock_t queued_bufs_lock; /* Protects queued_bufs */
> + unsigned sequence; /* buffer sequence counter */
>
> /* Note if taking both locks v4l2_lock must always be locked first! */
> struct mutex v4l2_lock; /* Protects everything else */
> @@ -415,6 +416,8 @@ static void rtl2832_sdr_urb_complete(struct urb *urb)
> len = rtl2832_sdr_convert_stream(s, ptr, urb->transfer_buffer,
> urb->actual_length);
> vb2_set_plane_payload(&fbuf->vb, 0, len);
> + v4l2_get_timestamp(&fbuf->vb.v4l2_buf.timestamp);
> + fbuf->vb.v4l2_buf.sequence = s->sequence++;
> vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE);
> }
> skip:
> @@ -611,8 +614,9 @@ static int rtl2832_sdr_queue_setup(struct vb2_queue *vq,
> struct rtl2832_sdr_state *s = vb2_get_drv_priv(vq);
> dev_dbg(&s->udev->dev, "%s: *nbuffers=%d\n", __func__, *nbuffers);
>
> - /* Absolute min and max number of buffers available for mmap() */
> - *nbuffers = clamp_t(unsigned int, *nbuffers, 8, 32);
> + /* Need at least 8 buffers */
> + if (vq->num_buffers + *nbuffers < 8)
> + *nbuffers = 8 - vq->num_buffers;
> *nplanes = 1;
> /* 2 = max 16-bit sample returned */
> sizes[0] = PAGE_ALIGN(BULK_BUFFER_SIZE * 2);
> @@ -1013,6 +1017,8 @@ static int rtl2832_sdr_start_streaming(struct vb2_queue *vq, unsigned int count)
> if (ret)
> goto err;
>
> + s->sequence = 0;
> +
> ret = rtl2832_sdr_submit_urbs(s);
> if (ret)
> goto err;
> @@ -1087,6 +1093,8 @@ static int rtl2832_sdr_s_tuner(struct file *file, void *priv,
> struct rtl2832_sdr_state *s = video_drvdata(file);
> dev_dbg(&s->udev->dev, "%s:\n", __func__);
>
> + if (v->index > 1)
> + return -EINVAL;
> return 0;
> }
>
> @@ -1122,12 +1130,15 @@ static int rtl2832_sdr_g_frequency(struct file *file, void *priv,
> dev_dbg(&s->udev->dev, "%s: tuner=%d type=%d\n",
> __func__, f->tuner, f->type);
>
> - if (f->tuner == 0)
> + if (f->tuner == 0) {
> f->frequency = s->f_adc;
> - else if (f->tuner == 1)
> + f->type = V4L2_TUNER_ADC;
> + } else if (f->tuner == 1) {
> f->frequency = s->f_tuner;
> - else
> + f->type = V4L2_TUNER_RF;
> + } else {
> return -EINVAL;
> + }
>
> return ret;
> }
> @@ -1161,7 +1172,9 @@ static int rtl2832_sdr_s_frequency(struct file *file, void *priv,
> __func__, s->f_adc);
> ret = rtl2832_sdr_set_adc(s);
> } else if (f->tuner == 1) {
> - s->f_tuner = f->frequency;
> + s->f_tuner = clamp_t(unsigned int, f->frequency,
> + bands_fm[0].rangelow,
> + bands_fm[0].rangehigh);
> dev_dbg(&s->udev->dev, "%s: RF frequency=%u Hz\n",
> __func__, f->frequency);
>
> @@ -1195,6 +1208,7 @@ static int rtl2832_sdr_g_fmt_sdr_cap(struct file *file, void *priv,
> dev_dbg(&s->udev->dev, "%s:\n", __func__);
>
> f->fmt.sdr.pixelformat = s->pixelformat;
> + memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
>
> return 0;
> }
> @@ -1211,6 +1225,7 @@ static int rtl2832_sdr_s_fmt_sdr_cap(struct file *file, void *priv,
> if (vb2_is_busy(q))
> return -EBUSY;
>
> + memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
> for (i = 0; i < NUM_FORMATS; i++) {
> if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
> s->pixelformat = f->fmt.sdr.pixelformat;
> @@ -1232,6 +1247,7 @@ static int rtl2832_sdr_try_fmt_sdr_cap(struct file *file, void *priv,
> dev_dbg(&s->udev->dev, "%s: pixelformat fourcc %4.4s\n", __func__,
> (char *)&f->fmt.sdr.pixelformat);
>
> + memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
> for (i = 0; i < NUM_FORMATS; i++) {
> if (formats[i].pixelformat == f->fmt.sdr.pixelformat)
> return 0;
> @@ -1362,6 +1378,7 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
> s->i2c = i2c;
> s->cfg = cfg;
> s->f_adc = bands_adc[0].rangelow;
> + s->f_tuner = bands_fm[0].rangelow;
> s->pixelformat = V4L2_SDR_FMT_CU8;
>
> mutex_init(&s->v4l2_lock);
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-03-10 10:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-05 23:21 [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues Hans Verkuil
2014-03-10 10:36 ` Antti Palosaari [this message]
2014-03-10 15:29 ` Antti Palosaari
2014-03-10 15:36 ` Hans Verkuil
2014-03-10 15:40 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=531D9593.8010902@iki.fi \
--to=crope@iki.fi \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox