From: Antti Palosaari <crope@iki.fi>
To: LMML <linux-media@vger.kernel.org>
Subject: [GIT PULL] SDR API
Date: Mon, 10 Mar 2014 21:38:19 +0200 [thread overview]
Message-ID: <531E14AB.4060309@iki.fi> (raw)
That is just same set I sent earlier too, but rebased to latest
media/master and 6 small compliance fix.
The following changes since commit f2d7313534072a5fe192e7cf46204b413acef479:
[media] drx-d: add missing braces in drxd_hard.c:DRXD_init
(2014-03-09 09:20:50 -0300)
are available in the git repository at:
git://linuxtv.org/anttip/media_tree.git sdr_review_v3
for you to fetch changes up to 2a02f2e9cf67c2e083950ea4b1d03a2756c1ee94:
msi3101: fix v4l2-compliance issues (2014-03-10 21:30:44 +0200)
----------------------------------------------------------------
Antti Palosaari (37):
v4l: add RF tuner channel bandwidth control
v4l: reorganize RF tuner control ID numbers
v4l: uapi: add SDR formats CU8 and CU16LE
v4l: add enum_freq_bands support to tuner sub-device
v4l: add control for RF tuner PLL lock flag
DocBook: V4L: add V4L2_SDR_FMT_CU8 - 'CU08'
DocBook: V4L: add V4L2_SDR_FMT_CU16LE - 'CU16'
DocBook: document RF tuner bandwidth controls
DocBook: media: document PLL lock control
DocBook: media: add some general info about RF tuners
msi3101: convert to SDR API
msi001: Mirics MSi001 silicon tuner driver
msi3101: use msi001 tuner driver
MAINTAINERS: add msi001 driver
MAINTAINERS: add msi3101 driver
msi3101: clamp mmap buffers to reasonable level
e4000: convert DVB tuner to I2C driver model
e4000: implement controls via v4l2 control framework
e4000: fix PLL calc to allow higher frequencies
e4000: implement PLL lock v4l control
e4000: get rid of DVB i2c_gate_ctrl()
e4000: convert to Regmap API
e4000: rename some variables
rtl2832_sdr: Realtek RTL2832 SDR driver module
rtl28xxu: constify demod config structs
rtl28xxu: attach SDR extension module
rtl28xxu: fix switch-case style issue
rtl28xxu: use muxed RTL2832 I2C adapters for E4000 and RTL2832_SDR
rtl2832_sdr: expose e4000 controls to user
r820t: add manual gain controls
rtl2832_sdr: expose R820T controls to user
MAINTAINERS: add rtl2832_sdr driver
v4l: rename v4l2_format_sdr to v4l2_sdr_format
rtl2832_sdr: clamp bandwidth to nearest legal value in automode
rtl28xxu: depends on I2C_MUX
msi001: fix v4l2-compliance issues
msi3101: fix v4l2-compliance issues
Hans Verkuil (1):
rtl2832u_sdr: fixing v4l2-compliance issues
Documentation/DocBook/media/v4l/controls.xml | 51 +++-
Documentation/DocBook/media/v4l/dev-sdr.xml | 2 +-
Documentation/DocBook/media/v4l/pixfmt-sdr-cu08.xml | 44 ++++
Documentation/DocBook/media/v4l/pixfmt-sdr-cu16le.xml | 46 ++++
Documentation/DocBook/media/v4l/pixfmt.xml | 3 +
MAINTAINERS | 30 +++
drivers/media/tuners/Kconfig | 1 +
drivers/media/tuners/e4000.c | 598
+++++++++++++++++++++++++++++------------------
drivers/media/tuners/e4000.h | 21 +-
drivers/media/tuners/e4000_priv.h | 86 ++++++-
drivers/media/tuners/r820t.c | 137 ++++++++++-
drivers/media/tuners/r820t.h | 10 +
drivers/media/usb/dvb-usb-v2/Kconfig | 2 +-
drivers/media/usb/dvb-usb-v2/Makefile | 1 +
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 90 +++++--
drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 2 +
drivers/media/v4l2-core/v4l2-ctrls.c | 9 +
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/staging/media/Kconfig | 2 +
drivers/staging/media/Makefile | 2 +
drivers/staging/media/msi3101/Kconfig | 7 +-
drivers/staging/media/msi3101/Makefile | 1 +
drivers/staging/media/msi3101/msi001.c | 500
+++++++++++++++++++++++++++++++++++++++
drivers/staging/media/msi3101/sdr-msi3101.c | 1564
+++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------
drivers/staging/media/rtl2832u_sdr/Kconfig | 7 +
drivers/staging/media/rtl2832u_sdr/Makefile | 6 +
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c | 1501
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h | 51 ++++
include/media/v4l2-subdev.h | 1 +
include/uapi/linux/v4l2-controls.h | 15 +-
include/uapi/linux/videodev2.h | 10 +-
31 files changed, 3531 insertions(+), 1271 deletions(-)
create mode 100644 Documentation/DocBook/media/v4l/pixfmt-sdr-cu08.xml
create mode 100644 Documentation/DocBook/media/v4l/pixfmt-sdr-cu16le.xml
create mode 100644 drivers/staging/media/msi3101/msi001.c
create mode 100644 drivers/staging/media/rtl2832u_sdr/Kconfig
create mode 100644 drivers/staging/media/rtl2832u_sdr/Makefile
create mode 100644 drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
create mode 100644 drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
--
http://palosaari.fi/
next reply other threads:[~2014-03-10 19:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-10 19:38 Antti Palosaari [this message]
2014-03-11 12:28 ` [GIT PULL] SDR API Antti Palosaari
-- strict thread matches above, loose matches on Subject: below --
2014-01-25 17:17 Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=531E14AB.4060309@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox