From: it-support <it@sca-uk.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: stoth@kernellabs.com
Subject: Re: [PATCH] cx23885: add support for Hauppauge ImpactVCB-e
Date: Tue, 15 Apr 2014 11:41:25 +0100 [thread overview]
Message-ID: <534D0CD5.3090906@sca-uk.com> (raw)
In-Reply-To: <534BE92F.3010501@xs4all.nl>
Hi Guys,
This is a very noobie question, but my 'patch' command does not return
to the command prompt.
I assume that my problem is one (or all four) of:
1) the patch doesn't start or end where I think it does (I assume the
first line is
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
and the last line is:
#define GPIO_1 0x00000002
2) I have put it in the wrong directory (I tried:
~/linuxtv/media_build/linux/drivers/media/pci/cx23885/
and
~/linuxtv/media_build
3) My patch syntax is wrong. I run it in the same directory as the file
like this: patch -b cx23885.diff
4) I don't need to apply because Steve has already patched it into
linuxtv and I get it automaticallw when I build linux tv.
Regards
Steve
On 14/04/14 14:57, Hans Verkuil wrote:
> This patch adds support for the Hauppauge ImpactVCB-e card to cx23885.
>
> Tested with Composite input and S-Video.
>
> While I do get audio it is very choppy. It is not clear whether that is
> a general cx23885 driver problem or specific to this board. If it is specific
> to the board, then I might have missed something.
>
> Steven (Toth, not Cookson ;-) ), do you have an idea what it might be?
>
> Regards,
>
> Hans
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 30 +++++++++++++++++++++++++++++-
> drivers/media/pci/cx23885/cx23885-video.c | 1 +
> drivers/media/pci/cx23885/cx23885.h | 1 +
> 3 files changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
> index 79f20c8..49a3711 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -649,7 +649,25 @@ struct cx23885_board cx23885_boards[] = {
> CX25840_NONE1_CH3,
> .amux = CX25840_AUDIO6,
> } },
> - }
> + },
> + [CX23885_BOARD_HAUPPAUGE_IMPACTVCBE] = {
> + .name = "Hauppauge ImpactVCB-e",
> + .porta = CX23885_ANALOG_VIDEO,
> + .input = {{
> + .type = CX23885_VMUX_COMPOSITE1,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN6_CH1,
> + .amux = CX25840_AUDIO7,
> + }, {
> + .type = CX23885_VMUX_SVIDEO,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN8_CH1 |
> + CX25840_SVIDEO_ON,
> + .amux = CX25840_AUDIO7,
> + } },
> + },
> };
> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>
> @@ -897,6 +915,10 @@ struct cx23885_subid cx23885_subids[] = {
> .subvendor = 0x1461,
> .subdevice = 0xd939,
> .card = CX23885_BOARD_AVERMEDIA_HC81R,
> + }, {
> + .subvendor = 0x0070,
> + .subdevice = 0x7133,
> + .card = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
> },
> };
> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
> @@ -977,6 +999,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
> case 71009:
> /* WinTV-HVR1200 (PCIe, Retail, full height)
> * DVB-T and basic analog */
> + case 71100:
> + /* WinTV-ImpactVCB-e (PCIe, Retail, half height)
> + * Basic analog */
> case 71359:
> /* WinTV-HVR1200 (PCIe, OEM, half height)
> * DVB-T and basic analog */
> @@ -1701,6 +1726,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1850:
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_HAUPPAUGE_HVR4400:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> if (dev->i2c_bus[0].i2c_rc == 0)
> hauppauge_eeprom(dev, eeprom+0xc0);
> break;
> @@ -1807,6 +1833,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1200:
> case CX23885_BOARD_HAUPPAUGE_HVR1700:
> case CX23885_BOARD_HAUPPAUGE_HVR1400:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
> case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
> @@ -1835,6 +1862,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> case CX23885_BOARD_HAUPPAUGE_HVR1800:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
> case CX23885_BOARD_HAUPPAUGE_HVR1700:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
> diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
> index 7891f34..976fe5d 100644
> --- a/drivers/media/pci/cx23885/cx23885-video.c
> +++ b/drivers/media/pci/cx23885/cx23885-video.c
> @@ -507,6 +507,7 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
> if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
> (dev->board == CX23885_BOARD_MPX885) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
> + (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
> diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
> index 0fa4048..6a4b20e 100644
> --- a/drivers/media/pci/cx23885/cx23885.h
> +++ b/drivers/media/pci/cx23885/cx23885.h
> @@ -96,6 +96,7 @@
> #define CX23885_BOARD_TBS_6981 40
> #define CX23885_BOARD_TBS_6980 41
> #define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
> +#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
next prev parent reply other threads:[~2014-04-15 10:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 13:57 [PATCH] cx23885: add support for Hauppauge ImpactVCB-e Hans Verkuil
2014-04-14 14:22 ` Steven Toth
2014-04-15 10:41 ` it-support [this message]
2014-04-15 10:43 ` Hans Verkuil
2014-04-17 21:07 ` Steve Cookson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=534D0CD5.3090906@sca-uk.com \
--to=it@sca-uk.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=stoth@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox