From: Sat <sattnag@aim.com>
To: linux-media@vger.kernel.org
Subject: Re: Help with SMS2270 @ linux-sunxi (A20 devices)
Date: Wed, 16 Apr 2014 17:51:21 +0900 [thread overview]
Message-ID: <534E4489.6080909@aim.com> (raw)
In-Reply-To: <DB7459DA-2266-4DF3-BBD6-3CB991F7738A@eletronica.org>
Hi Roberto,
Did you check if the device id of your tuner is included in smsusb.c?
id can be gotten by lsusb command.
Thanks,
Satoshi
(2014/04/16 8:28), Roberto Alcantara wrote:
> Guys,
>
> I’m trying enable Siano SMS2270 ISDB-T tuner in development board with Allwinner A20 SoC.
>
> I recompiled kernel with modules I can load them but something seems wrong. After insert USB Sms2270 dongle I only see:
>
> Jan 1 00:15:20 awsom kernel: [ 922.645502] usb 1-1.4: new high-speed USB device number 6 using sw-ehci
> Jan 1 00:15:20 awsom mtp-probe: checking bus 1, device 6: "/sys/devices/platform/sw-ehci.1/usb1/1-1/1-1.4"
> Jan 1 00:15:20 awsom mtp-probe: bus: 1, device: 6 was not an MTP device
>
> and no more logs.
>
> smsusb was loaded with debug=2.
>
> The usb dongle is plugged on usb powered hub and other devices like keyboard are working fine with this hub port.
>
> What I missing here? Thanks for all tips ! :-)
>
> Best regards,
> - Roberto
>
>
> root@awsom:/home/linaro# lsmod
> Module Size Used by
> sunxi_cedar_mod 10284 0
> smsdvb 13909 0
> smsusb 8936 0
> smsmdtv 28266 2 smsdvb,smsusb
> disp_ump 854 0
> mali_drm 2638 1
> mali 113459 0
> ump 56392 4 disp_ump,mali
> lcd 3646 0
>
> root@awsom:/home/linaro# lsusb
> Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller
> Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon
>
> root@awsom:/home/linaro# uname -a
> Linux awsom 3.4.75.sun7i_CRAFF+ #4 SMP PREEMPT Thu Apr 10 01:17:47 BRT 2014 armv7l armv7l armv7l GNU/Linux
>
>
>
>
> root@awsom:/home/linaro# lsusb -v
>
> Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x058f Alcor Micro Corp.
> idProduct 0x6254 USB Hub
> bcdDevice 1.00
> iManufacturer 0
> iProduct 1 USB2.0Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x0080
> Ganged power switching
> Ganged overcurrent protection
> TT think time 8 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0303 lowspeed power enable connect
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0503 highspeed power enable connect
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd
> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
> iSerial 1 sw-ehci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0503 highspeed power enable connect
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd
> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
> iSerial 1 sw-ohci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x0012
> No power switching (usb 1.0)
> No overcurrent protection
> bPwrOn2PwrGood 2 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd
> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
> iSerial 1 sw-ehci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd
> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
> iSerial 1 sw-ohci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x0012
> No power switching (usb 1.0)
> No overcurrent protection
> bPwrOn2PwrGood 2 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x0e8f GreenAsia Inc.
> idProduct 0x0021 Multimedia Keyboard Controller
> bcdDevice 2.07
> iManufacturer 1 CZW
> iProduct 2 USB Keyboard
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 59
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 62
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 0 None
> iInterface 1 CZW
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 50
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Device Status: 0x0000
> (Bus Powered)
>
> Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x187f Siano Mobile Silicon
> idProduct 0x0600
> bcdDevice 0.08
> iManufacturer 1 MDTV Receiver
> iProduct 2 MDTV Receiver
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 255 Vendor Specific Class
> bDeviceSubClass 255 Vendor Specific Subclass
> bDeviceProtocol 255 Vendor Specific Protocol
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
> root@awsom:/home/linaro#
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-04-16 8:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-15 23:28 Help with SMS2270 @ linux-sunxi (A20 devices) Roberto Alcantara
2014-04-16 8:51 ` Sat [this message]
2014-04-16 16:34 ` Mauro Carvalho Chehab
2014-04-17 1:27 ` Roberto Alcantara
2014-04-17 3:06 ` Sat
2014-04-26 22:48 ` Roberto Alcantara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=534E4489.6080909@aim.com \
--to=sattnag@aim.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox