From: Antti Palosaari <crope@iki.fi>
To: "Manuel Schölling" <manuel.schoelling@gmx.de>
Cc: m.chehab@samsung.com, gregkh@linuxfoundation.org,
linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH] msi3103: Use time_before_eq()
Date: Sun, 15 Jun 2014 12:47:20 +0300 [thread overview]
Message-ID: <539D6BA8.6010802@iki.fi> (raw)
In-Reply-To: <1401021579-22481-1-git-send-email-manuel.schoelling@gmx.de>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Mauro, pick that from patchwork to 3.16. I am not going to PULL request it.
regards
Antti
On 05/25/2014 03:39 PM, Manuel Schölling wrote:
> To be future-proof and for better readability the time comparisons are
> modified to use time_before_eq() instead of plain, error-prone math.
>
> Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
> ---
> drivers/staging/media/msi3101/sdr-msi3101.c | 28 +++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/staging/media/msi3101/sdr-msi3101.c b/drivers/staging/media/msi3101/sdr-msi3101.c
> index 65d351f..7a0a8ca 100644
> --- a/drivers/staging/media/msi3101/sdr-msi3101.c
> +++ b/drivers/staging/media/msi3101/sdr-msi3101.c
> @@ -207,10 +207,10 @@ static int msi3101_convert_stream_504(struct msi3101_state *s, u8 *dst,
> dst_len += 1008;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> - if ((s->jiffies_next + msecs_to_jiffies(10000)) <= jiffies) {
> + /* calculate sampling rate and output it in 10 seconds intervals */
> + if (time_before_eq(s->jiffies_next + 10 * HZ, jiffies)) {
> unsigned long jiffies_now = jiffies;
> - unsigned long msecs = jiffies_to_msecs(jiffies_now) - jiffies_to_msecs(s->jiffies_next);
> + unsigned long msecs = jiffies_to_msecs(jiffies_now - s->jiffies_next);
> unsigned int samples = sample_num[i_max - 1] - s->sample;
> s->jiffies_next = jiffies_now;
> s->sample = sample_num[i_max - 1];
> @@ -265,7 +265,7 @@ static int msi3101_convert_stream_504_u8(struct msi3101_state *s, u8 *dst,
> dst_len += 1008;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> + /* calculate sampling rate and output it in 10 seconds intervals */
> if (unlikely(time_is_before_jiffies(s->jiffies_next))) {
> #define MSECS 10000UL
> unsigned int samples = sample_num[i_max - 1] - s->sample;
> @@ -359,10 +359,10 @@ static int msi3101_convert_stream_384(struct msi3101_state *s, u8 *dst,
> dst_len += 984;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> - if ((s->jiffies_next + msecs_to_jiffies(10000)) <= jiffies) {
> + /* calculate sampling rate and output it in 10 seconds intervals */
> + if (time_before_eq(s->jiffies_next + 10 * HZ, jiffies)) {
> unsigned long jiffies_now = jiffies;
> - unsigned long msecs = jiffies_to_msecs(jiffies_now) - jiffies_to_msecs(s->jiffies_next);
> + unsigned long msecs = jiffies_to_msecs(jiffies_now - s->jiffies_next);
> unsigned int samples = sample_num[i_max - 1] - s->sample;
> s->jiffies_next = jiffies_now;
> s->sample = sample_num[i_max - 1];
> @@ -424,10 +424,10 @@ static int msi3101_convert_stream_336(struct msi3101_state *s, u8 *dst,
> dst_len += 1008;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> - if ((s->jiffies_next + msecs_to_jiffies(10000)) <= jiffies) {
> + /* calculate sampling rate and output it in 10 seconds intervals */
> + if (time_before_eq(s->jiffies_next + 10 * HZ, jiffies)) {
> unsigned long jiffies_now = jiffies;
> - unsigned long msecs = jiffies_to_msecs(jiffies_now) - jiffies_to_msecs(s->jiffies_next);
> + unsigned long msecs = jiffies_to_msecs(jiffies_now - s->jiffies_next);
> unsigned int samples = sample_num[i_max - 1] - s->sample;
> s->jiffies_next = jiffies_now;
> s->sample = sample_num[i_max - 1];
> @@ -487,10 +487,10 @@ static int msi3101_convert_stream_252(struct msi3101_state *s, u8 *dst,
> dst_len += 1008;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> - if ((s->jiffies_next + msecs_to_jiffies(10000)) <= jiffies) {
> + /* calculate sampling rate and output it in 10 seconds intervals */
> + if (time_before_eq(s->jiffies_next + 10 * HZ, jiffies)) {
> unsigned long jiffies_now = jiffies;
> - unsigned long msecs = jiffies_to_msecs(jiffies_now) - jiffies_to_msecs(s->jiffies_next);
> + unsigned long msecs = jiffies_to_msecs(jiffies_now - s->jiffies_next);
> unsigned int samples = sample_num[i_max - 1] - s->sample;
> s->jiffies_next = jiffies_now;
> s->sample = sample_num[i_max - 1];
> @@ -560,7 +560,7 @@ static int msi3101_convert_stream_252_u16(struct msi3101_state *s, u8 *dst,
> dst_len += 1008;
> }
>
> - /* calculate samping rate and output it in 10 seconds intervals */
> + /* calculate sampling rate and output it in 10 seconds intervals */
> if (unlikely(time_is_before_jiffies(s->jiffies_next))) {
> #define MSECS 10000UL
> unsigned int samples = sample_num[i_max - 1] - s->sample;
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-06-15 9:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-25 12:39 [PATCH] msi3103: Use time_before_eq() Manuel Schölling
2014-06-15 9:47 ` Antti Palosaari [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-05-24 18:47 Manuel Schölling
2014-05-24 19:10 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=539D6BA8.6010802@iki.fi \
--to=crope@iki.fi \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
--cc=manuel.schoelling@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).