* Leadtek WinFast DTV Dongle Dual
@ 2014-06-05 23:54 David Shirley
2014-06-15 22:05 ` Antti Palosaari
0 siblings, 1 reply; 2+ messages in thread
From: David Shirley @ 2014-06-05 23:54 UTC (permalink / raw)
To: linux-media
Hi All,
Recently purchased one of these (0413:6a05), the instructions @
http://www.linuxtv.org/wiki/index.php/Leadtek_WinFast_DTV_Dual_Dongle
appear to be wrong.
Running 3.14.5 I didn't need to patch
drivers/media/usb/dvb-usb-v2/af9035.c, however the tuner wouldn't work
(it would be detected, but not able to tune)
After a lot of stuffing around, I ended up patching it913x.c instead
and everything is working well, here is my dmesg output:
[ 3.981516] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 4.149345] usb 3-2: New USB device found, idVendor=0413, idProduct=6a05
[ 4.149355] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.149361] usb 3-2: Product: WinFast DTV Dongle Dual
[ 4.149366] usb 3-2: Manufacturer: Leadtek
[ 380.529378] it913x: Chip Version=02 Chip Type=9135
[ 380.530913] it913x: Remote propriety (raw) modeit913x: Dual mode=3
Tuner Type=38
[ 380.531310] it913x: Unknown tuner ID applying default 0x60it913x:
Chip Version=02 Chip Type=9135
[ 380.637528] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV
Dongle Dual' in cold state
[ 380.638195] usb 3-2: dvb_usb_v2: downloading firmware from file
'dvb-usb-it9135-02.fw'
[ 380.638598] it913x: FRM Starting Firmware Download
[ 381.130961] it913x: FRM Firmware Download Completed - Resetting
Deviceit913x: Chip Version=02 Chip Type=9135
[ 381.164104] it913x: Firmware Version 52887808<6>
[ 381.226204] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV
Dongle Dual' in warm state
[ 381.226300] usb 3-2: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[ 381.226519] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
[ 381.231125] it913x-fe: ADF table value :00
[ 381.234465] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[ 381.262283] it913x-fe: Tuner LNA type :60
[ 381.493014] usb 3-2: DVB: registering adapter 0 frontend 0 (Leadtek
WinFast DTV Dongle Dual_1)...
[ 381.493251] usb 3-2: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[ 381.493446] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
[ 381.494234] it913x-fe: ADF table value :00
[ 381.519335] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[ 381.750290] it913x-fe: Tuner LNA type :60
[ 382.280671] usb 3-2: DVB: registering adapter 1 frontend 0 (Leadtek
WinFast DTV Dongle Dual_2)...
[ 382.304097] IR keymap rc-it913x-v2 not found
[ 382.304282] input: Leadtek WinFast DTV Dongle Dual as
/devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0/input9
[ 382.304443] rc0: Leadtek WinFast DTV Dongle Dual as
/devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0
[ 382.304453] usb 3-2: dvb_usb_v2: schedule remote query interval to 250 msecs
[ 382.304462] usb 3-2: dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual'
successfully initialized and connected
[ 382.304551] usbcore: registered new interface driver dvb_usb_it913x
My kernel config:
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_IT913X=m
CONFIG_DVB_IT913X_FE=m
Do you want the output when it was using the af9035 driver?
Regards
David
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Leadtek WinFast DTV Dongle Dual
2014-06-05 23:54 Leadtek WinFast DTV Dongle Dual David Shirley
@ 2014-06-15 22:05 ` Antti Palosaari
0 siblings, 0 replies; 2+ messages in thread
From: Antti Palosaari @ 2014-06-15 22:05 UTC (permalink / raw)
To: David Shirley, linux-media
On 06/06/2014 02:54 AM, David Shirley wrote:
> Hi All,
>
> Recently purchased one of these (0413:6a05), the instructions @
> http://www.linuxtv.org/wiki/index.php/Leadtek_WinFast_DTV_Dual_Dongle
> appear to be wrong.
>
> Running 3.14.5 I didn't need to patch
> drivers/media/usb/dvb-usb-v2/af9035.c, however the tuner wouldn't work
> (it would be detected, but not able to tune)
>
> After a lot of stuffing around, I ended up patching it913x.c instead
> and everything is working well, here is my dmesg output:
>
> [ 3.981516] usb 3-2: new high-speed USB device number 2 using xhci_hcd
> [ 4.149345] usb 3-2: New USB device found, idVendor=0413, idProduct=6a05
> [ 4.149355] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.149361] usb 3-2: Product: WinFast DTV Dongle Dual
> [ 4.149366] usb 3-2: Manufacturer: Leadtek
> [ 380.529378] it913x: Chip Version=02 Chip Type=9135
> [ 380.530913] it913x: Remote propriety (raw) modeit913x: Dual mode=3
> Tuner Type=38
> [ 380.531310] it913x: Unknown tuner ID applying default 0x60it913x:
> Chip Version=02 Chip Type=9135
1) Older Leadtek was using V1 chips as seen on Wiki log. That device was
added about ~9 months ago, Kernel 3.13.
2) It says "Unknown tuner ID applying default 0x60". Unfortunately it
does not say which was the ID driver fixes. This makes me wonder if it
is 0x38 which was used for V1 devices and it is not working due to wrong ID.
3) I don't have any IT9135 V2 dual device (single V1 & V2 and dual V1).
So I cannot even make any tests.
> [ 380.637528] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV
> Dongle Dual' in cold state
> [ 380.638195] usb 3-2: dvb_usb_v2: downloading firmware from file
> 'dvb-usb-it9135-02.fw'
> [ 380.638598] it913x: FRM Starting Firmware Download
> [ 381.130961] it913x: FRM Firmware Download Completed - Resetting
> Deviceit913x: Chip Version=02 Chip Type=9135
> [ 381.164104] it913x: Firmware Version 52887808<6>
> [ 381.226204] usb 3-2: dvb_usb_v2: found a 'Leadtek WinFast DTV
> Dongle Dual' in warm state
> [ 381.226300] usb 3-2: dvb_usb_v2: will pass the complete MPEG2
> transport stream to the software demuxer
> [ 381.226519] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
> [ 381.231125] it913x-fe: ADF table value :00
> [ 381.234465] it913x-fe: Crystal Frequency :12000000 Adc Frequency
> :20250000 ADC X2: 01
> [ 381.262283] it913x-fe: Tuner LNA type :60
> [ 381.493014] usb 3-2: DVB: registering adapter 0 frontend 0 (Leadtek
> WinFast DTV Dongle Dual_1)...
> [ 381.493251] usb 3-2: dvb_usb_v2: will pass the complete MPEG2
> transport stream to the software demuxer
> [ 381.493446] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual)
> [ 381.494234] it913x-fe: ADF table value :00
> [ 381.519335] it913x-fe: Crystal Frequency :12000000 Adc Frequency
> :20250000 ADC X2: 01
> [ 381.750290] it913x-fe: Tuner LNA type :60
> [ 382.280671] usb 3-2: DVB: registering adapter 1 frontend 0 (Leadtek
> WinFast DTV Dongle Dual_2)...
> [ 382.304097] IR keymap rc-it913x-v2 not found
> [ 382.304282] input: Leadtek WinFast DTV Dongle Dual as
> /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0/input9
> [ 382.304443] rc0: Leadtek WinFast DTV Dongle Dual as
> /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0
> [ 382.304453] usb 3-2: dvb_usb_v2: schedule remote query interval to 250 msecs
> [ 382.304462] usb 3-2: dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual'
> successfully initialized and connected
> [ 382.304551] usbcore: registered new interface driver dvb_usb_it913x
>
> My kernel config:
> CONFIG_DVB_USB_V2=m
> CONFIG_DVB_USB_IT913X=m
> CONFIG_DVB_IT913X_FE=m
>
> Do you want the output when it was using the af9035 driver?
AF9035 debug could be nice to see. Or any other debug which shows tuner
ID. I suspect overriding tuner ID with correct ID 0x60 will make this
device working. Like I did for these devices:
https://patchwork.linuxtv.org/patch/24340/
regards
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-06-15 22:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-05 23:54 Leadtek WinFast DTV Dongle Dual David Shirley
2014-06-15 22:05 ` Antti Palosaari
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).