From: Antti Palosaari <crope@iki.fi>
To: Hans Verkuil <hverkuil@xs4all.nl>, linux-media@vger.kernel.org
Subject: Re: [PATCH] airspy: AirSpy SDR driver
Date: Mon, 14 Jul 2014 22:55:21 +0300 [thread overview]
Message-ID: <53C435A9.8020004@iki.fi> (raw)
In-Reply-To: <53C430AC.9030204@xs4all.nl>
Moikka Hans!
On 07/14/2014 10:34 PM, Hans Verkuil wrote:
> On 07/14/2014 09:27 PM, Antti Palosaari wrote:
>> AirSpy SDR driver.
>>
>> Thanks to Youssef Touil and Benjamin Vernoux for support, help and
>> hardware!
>> http://airspy.com/
>>
>> Signed-off-by: Antti Palosaari <crope@iki.fi>
>> ---
>> drivers/staging/media/Kconfig | 1 +
>> drivers/staging/media/Makefile | 1 +
>> drivers/staging/media/airspy/Kconfig | 5 +
>> drivers/staging/media/airspy/Makefile | 1 +
>> drivers/staging/media/airspy/airspy.c | 1120 +++++++++++++++++++++++++++++++++
>> 5 files changed, 1128 insertions(+)
>> create mode 100644 drivers/staging/media/airspy/Kconfig
>> create mode 100644 drivers/staging/media/airspy/Makefile
>> create mode 100644 drivers/staging/media/airspy/airspy.c
>>
>
> It's a new driver, so the usual question: can you post the output from the
> latest v4l2-compliance? 'v4l2-compliance -S /dev/swradioX -s'
>
> It looks good, but I always like to see the output of that as a record and
> as a verification that someone actually ran it :-)
I actually ran v4l2-compliance and there was problem with ADC band
enumeration. v4l2-compliance didn't liked as ADC freq was just 20MHz,
both upper and lower limit. Due to that I added even small hack to driver,
+ .rangelow = 20000000,
+ .rangehigh = 20000001, /* FIXME: make v4l2-compliance happy */
But here is new ran, brand new v4l2-compliance:
[crope@localhost v4l-utils]$ which v4l2-compliance
/usr/local/bin/v4l2-compliance
[crope@localhost v4l-utils]$ ls -l /usr/local/bin/v4l2-compliance
-rwxr-xr-x. 1 root root 1497964 Jul 14 22:50 /usr/local/bin/v4l2-compliance
[crope@localhost v4l-utils]$ /usr/local/bin/v4l2-compliance -S
/dev/swradio0 -s
Driver Info:
Driver name : airspy
Card type : AirSpy SDR
Bus info : usb-0000:00:13.2-1
Driver version: 3.15.0
Capabilities : 0x85110000
SDR Capture
Tuner
Read/Write
Streaming
Device Capabilities
Device Caps : 0x05110000
SDR Capture
Tuner
Read/Write
Streaming
Compliance test for device /dev/swradio0 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second sdr open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER: OK
test VIDIOC_G/S_FREQUENCY: OK
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 2
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERYCTRL/MENU: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 6 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK (Not Supported)
Streaming ioctls:
test read/write: OK
test MMAP: OK
test USERPTR: OK
test DMABUF: OK
Total: 42, Succeeded: 42, Failed: 0, Warnings: 0
[crope@localhost v4l-utils]$
regards
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-07-14 19:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 19:27 [PATCH] airspy: AirSpy SDR driver Antti Palosaari
2014-07-14 19:34 ` Hans Verkuil
2014-07-14 19:55 ` Antti Palosaari [this message]
2014-07-14 20:01 ` Hans Verkuil
2014-07-15 2:35 ` Antti Palosaari
2014-07-15 3:50 ` Hans Verkuil
2014-07-18 0:14 ` Antti Palosaari
2014-07-18 5:03 ` Hans Verkuil
2014-07-18 14:57 ` Antti Palosaari
2014-07-18 15:01 ` Hans Verkuil
2014-07-18 15:10 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C435A9.8020004@iki.fi \
--to=crope@iki.fi \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox