From: Antti Palosaari <crope@iki.fi>
To: Olli Salonen <olli.salonen@iki.fi>, linux-media@vger.kernel.org
Subject: Re: [PATCHv2 3/4] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CI
Date: Sun, 10 Aug 2014 01:51:57 +0300 [thread overview]
Message-ID: <53E6A60D.2040901@iki.fi> (raw)
In-Reply-To: <1407481598-24598-3-git-send-email-olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
cxusb_ctrl_msg() uses USB buffers from the stack which is no-no. But it
is old mistake...
regards
Antti
On 08/08/2014 10:06 AM, Olli Salonen wrote:
> TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with
> the following components:
>
> USB interface: Cypress CY7C68013A-56LTXC
> Demodulator: Silicon Labs Si2168-A20
> Tuner: Silicon Labs Si2158-A20
> CI chip: CIMaX SP2HF
>
> The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400.
> See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html
>
> The demodulator needs a firmware that can be extracted from the Windows drivers.
> File ttConnect4650_64.sys should be extracted from
> http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below).
>
> 3464bfc37a47b4032568718bacba23fb ttConnect4650_64.sys
>
> Then the firmware can be extracted:
> dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw
>
> The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl
> that is passed on to the SP2 driver and called back for CAM operations.
>
> Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
> ---
> drivers/media/usb/dvb-usb/Kconfig | 2 +-
> drivers/media/usb/dvb-usb/cxusb.c | 92 ++++++++++++++++++++++++++++++++++++++-
> drivers/media/usb/dvb-usb/cxusb.h | 4 ++
> 3 files changed, 96 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
> index 10aef21..41d3eb9 100644
> --- a/drivers/media/usb/dvb-usb/Kconfig
> +++ b/drivers/media/usb/dvb-usb/Kconfig
> @@ -130,7 +130,7 @@ config DVB_USB_CXUSB
>
> Medion MD95700 hybrid USB2.0 device.
> DViCO FusionHDTV (Bluebird) USB2.0 devices
> - TechnoTrend TVStick CT2-4400
> + TechnoTrend TVStick CT2-4400 and CT2-4650 CI devices
>
> config DVB_USB_M920X
> tristate "Uli m920x DVB-T USB2.0 support"
> diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
> index 16bc579..c3a44c7 100644
> --- a/drivers/media/usb/dvb-usb/cxusb.c
> +++ b/drivers/media/usb/dvb-usb/cxusb.c
> @@ -44,6 +44,7 @@
> #include "atbm8830.h"
> #include "si2168.h"
> #include "si2157.h"
> +#include "sp2.h"
>
> /* Max transfer size done by I2C transfer functions */
> #define MAX_XFER_SIZE 80
> @@ -672,6 +673,37 @@ static struct rc_map_table rc_map_d680_dmb_table[] = {
> { 0x0025, KEY_POWER },
> };
>
> +static int cxusb_tt_ct2_4650_ci_ctrl(void *priv, u8 read, int addr,
> + u8 data, int *mem)
> +{
> + struct dvb_usb_device *d = priv;
> + u8 wbuf[3];
> + u8 rbuf[2];
> + int ret;
> +
> + wbuf[0] = (addr >> 8) & 0xff;
> + wbuf[1] = addr & 0xff;
> +
> + if (read) {
> + ret = cxusb_ctrl_msg(d, CMD_SP2_CI_READ, wbuf, 2, rbuf, 2);
> + } else {
> + wbuf[2] = data;
> + ret = cxusb_ctrl_msg(d, CMD_SP2_CI_WRITE, wbuf, 3, rbuf, 1);
> + }
> +
> + if (ret)
> + goto err;
> +
> + if (read)
> + *mem = rbuf[1];
> +
> + return 0;
> +err:
> + deb_info("%s: ci usb write returned %d\n", __func__, ret);
> + return ret;
> +
> +}
> +
> static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
> {
> static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
> @@ -1350,9 +1382,12 @@ static int cxusb_tt_ct2_4400_attach(struct dvb_usb_adapter *adap)
> struct i2c_adapter *adapter;
> struct i2c_client *client_demod;
> struct i2c_client *client_tuner;
> + struct i2c_client *client_ci;
> struct i2c_board_info info;
> struct si2168_config si2168_config;
> struct si2157_config si2157_config;
> + struct sp2_config sp2_config;
> + u8 o[2], i;
>
> /* reset the tuner */
> if (cxusb_tt_ct2_4400_gpio_tuner(d, 0) < 0) {
> @@ -1408,6 +1443,48 @@ static int cxusb_tt_ct2_4400_attach(struct dvb_usb_adapter *adap)
>
> st->i2c_client_tuner = client_tuner;
>
> + /* initialize CI */
> + if (d->udev->descriptor.idProduct ==
> + USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI) {
> +
> + memcpy(o, "\xc0\x01", 2);
> + cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
> + msleep(100);
> +
> + memcpy(o, "\xc0\x00", 2);
> + cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
> + msleep(100);
> +
> + memset(&sp2_config, 0, sizeof(sp2_config));
> + sp2_config.dvb_adap = &adap->dvb_adap;
> + sp2_config.priv = d;
> + sp2_config.ci_control = cxusb_tt_ct2_4650_ci_ctrl;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "sp2", I2C_NAME_SIZE);
> + info.addr = 0x40;
> + info.platform_data = &sp2_config;
> + request_module(info.type);
> + client_ci = i2c_new_device(&d->i2c_adap, &info);
> + if (client_ci == NULL || client_ci->dev.driver == NULL) {
> + module_put(client_tuner->dev.driver->owner);
> + i2c_unregister_device(client_tuner);
> + module_put(client_demod->dev.driver->owner);
> + i2c_unregister_device(client_demod);
> + return -ENODEV;
> + }
> + if (!try_module_get(client_ci->dev.driver->owner)) {
> + i2c_unregister_device(client_ci);
> + module_put(client_tuner->dev.driver->owner);
> + i2c_unregister_device(client_tuner);
> + module_put(client_demod->dev.driver->owner);
> + i2c_unregister_device(client_demod);
> + return -ENODEV;
> + }
> +
> + st->i2c_client_ci = client_ci;
> +
> + }
> +
> return 0;
> }
>
> @@ -1537,6 +1614,13 @@ static void cxusb_disconnect(struct usb_interface *intf)
> struct cxusb_state *st = d->priv;
> struct i2c_client *client;
>
> + /* remove I2C client for CI */
> + client = st->i2c_client_ci;
> + if (client) {
> + module_put(client->dev.driver->owner);
> + i2c_unregister_device(client);
> + }
> +
> /* remove I2C client for tuner */
> client = st->i2c_client_tuner;
> if (client) {
> @@ -1576,6 +1660,7 @@ static struct usb_device_id cxusb_table [] = {
> { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
> { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
> { USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_TVSTICK_CT2_4400) },
> + { USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI) },
> {} /* Terminating entry */
> };
> MODULE_DEVICE_TABLE (usb, cxusb_table);
> @@ -2265,13 +2350,18 @@ static struct dvb_usb_device_properties cxusb_tt_ct2_4400_properties = {
> .rc_interval = 150,
> },
>
> - .num_device_descs = 1,
> + .num_device_descs = 2,
> .devices = {
> {
> "TechnoTrend TVStick CT2-4400",
> { NULL },
> { &cxusb_table[20], NULL },
> },
> + {
> + "TechnoTrend TT-connect CT2-4650 CI",
> + { NULL },
> + { &cxusb_table[21], NULL },
> + },
> }
> };
>
> diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h
> index 527ff79..29f3e2e 100644
> --- a/drivers/media/usb/dvb-usb/cxusb.h
> +++ b/drivers/media/usb/dvb-usb/cxusb.h
> @@ -28,10 +28,14 @@
> #define CMD_ANALOG 0x50
> #define CMD_DIGITAL 0x51
>
> +#define CMD_SP2_CI_WRITE 0x70
> +#define CMD_SP2_CI_READ 0x71
> +
> struct cxusb_state {
> u8 gpio_write_state[3];
> struct i2c_client *i2c_client_demod;
> struct i2c_client *i2c_client_tuner;
> + struct i2c_client *i2c_client_ci;
> };
>
> #endif
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-08-09 22:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-08 7:06 [PATCHv2 1/4] sp2: Add I2C driver for CIMaX SP2 common interface module Olli Salonen
2014-08-08 7:06 ` [PATCHv2 2/4] Add USB ID for TechnoTrend TT-connect CT2-4650 CI Olli Salonen
2014-08-09 22:47 ` Antti Palosaari
2014-08-08 7:06 ` [PATCHv2 3/4] cxusb: Add support " Olli Salonen
2014-08-09 22:51 ` Antti Palosaari [this message]
2014-08-08 7:06 ` [PATCH 4/4] cxusb: Add read_mac_address for TT CT2-4400 and CT2-4650 Olli Salonen
2014-08-09 22:54 ` Antti Palosaari
2014-08-09 22:47 ` [PATCHv2 1/4] sp2: Add I2C driver for CIMaX SP2 common interface module Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53E6A60D.2040901@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).